AVPro Edge AC-DAC-COTO User manual

Digital to Analog Audio Converter
AC-DAC-COTO
Quick Start Guide
AVPro Edge’s Digital to Analog Audio Converter is an easy to use product that
converts Coaxial or Optical audio signals into analog Stereo (L/R) audio. It can be
easily switched between either Coaxial or Optical inputs. With its compact, elegant
design and simple LED input status make it easier for users to connect up and use
instantly.
This quick start guide will be going
through:
• Installation
• Product breakdown
• Troubleshooting
Installation
1. PLug in the 5 V power supply
included with the AC-DAC-COTO
2. Connect the audio source (Dvd player, cable box, gaming con-
sole) via Optical in or Coax in.
3. Connect active speakers/avr via Optical out or Coax out.
4. select which input you would like to output with the coax/
optical switch.

top panel
Optical and Coax LEDs: These LED lights will
illuminate according to which input is
Currently selected.
Front Panel
l/r out: ANalog Stereo output. used to Connect
to the input of your audio device or display
Rear Panel
Coax In: Connect to the Coaxial digital audio
source, such as a DVD player or CD player.
Optical In: Connect to the Optical audio source,
such as a Blu-ray player or games console.
LEFT Panel
Coax/Optical Switch: Select which digital audio
input is active and will be converted to analog
stereo (L/R) audio.
DC 5V: Connect the 5V DC power supply to the
unit and plug the adapter into an AC wall
outlet.

Troubleshooting
• Verify Power- ENsure power is plugged in correctly
• Verify Connections- Check that all cables are properly connected
• Make sure you select optical or coax with the switch depending on
what you would like to output.
Have a question or need assistance?
Don’t hesitate to contact us!
SUPPORT: [phone]
USA TOLL FREE: 877-886-5112
EMAIL: [e-mail]