Avvio 505 User manual

11
AVVIO 505
GSM Digital Mobile Phone
User Guide

21
Thank you for choosing the AVVIO 505 GSM digital
mobile phone. After reading this guide you will be able to
fully master the use of your AVVIO 505 mobile phone and
appreciate all its functions and ease of use.
The AVVIO 505 mobile phone is designed for use on
the GSM networks. Not only does the AVVIO 505 provide
you with basic calling functions, but also with many
practical functions such as a name card style phonebook,
personalized 64 chord ring tones and pictures, clock, alarm,
camera, phonic kinescope, MP3/MP4 player, Memory
(T-Flash) card, sound recorder, calculator, automatic power
on/power off, to improve the time you spend working and
playing. Moreover, the AVVIO 505 uses a personalized
man-machine interface and the perfect functional design
will satisfy all your needs. The AVVIO 505 TV mobile
phone is compatible with GSM technology and has been
approved by certification authorities both domestically and
abroad.
Technical information
Phone
Model AVVIO 505
Dimensions (w×h×t) 43.4×104.3×13.5mm
Weight
Lithium Battery

3
Model AVVIO 505
Nominal voltage 3.7V
Nominal 4.2V+/-0.05V
Capacity rating 850mAh
Travel charger
Model AVVIO 505
Input AC 220V~50Hz, 100mA
Output 5.0V, 500mA
USB data charge wire
spec USB2.0Slave
Earphone
spec stereoearphone
Appearance
1. USB 2. Receiver
3. Screen 4. Keypad
5. Light 6. TV ant

4
7. Camera
Keypad Instructions
1. Left soft key：to perform the function of the prompt
displayed in lower left corner of the screen.
2. Dial key: to dial and pick up calls; on standby, to
see the calls record list.
3. Right soft key：to perform the function of the
prompt displayed in lower right corner of the
screen.
4. Torch Light key: the key is to use light.
5. Left/right keys：for moving the cursor when
editing text; on standby, press the left key to enter
the “Write Messages” menu, press the right key to
enter into the “Tone Setup” menu. At the camera
preview mode, press the left/right keys to

5
circularly switch with EV; in the [File Manager]
\[Memory Card] submenu, press the left key to
return the upper menu, press the right key to open
the file.
6. Up/down keys ：scroll to view names, phone
numbers, SMS, MMS etc, moves the cursor up and
down when editing text; on standby, press the up
key to enter the “Video Recorder” menu, press the
down key to enter into the “Alarm” menu. At the
camera preview mode, press the up/down keys to
adjust Zoom.
7. Camera key:.taking pictures
8. Number key: to import numbers;When playing
music,use 6 to decrease volume,use 3 to
increase volume.
9. OK key: to enter the menu or execute the
function which hightlighted.
10. Hang-up key: to end a call or reject incoming calls;
under most circumstances pressing this key will put
the mobile phone into standby mode.
11. TV keys: to play TV.
12. Mp3 keys: to play music

6
Battery
The battery is initially charged with 50％of its total
capacity, you can unpack and use it. Please recharge the
battery to full after it's exhausted for the first 3 times, so as
to make the best of your battery.
Removal and Installation of the Battery
When removing the battery follow the following steps:
①Push the battery cover towards bottom;
②Raise the battery bottom, break out the battery from
the mobile-phone.
Warning: You must turn off your mobile phone before
removing the battery. Under no circumstances
should you remove the battery when the mobile
phone is on as this may damage the SIM card and
your mobile phone.
When installing the battery follow the following steps:
①According to arrowhead direction, push the battery

7
to inset mobile-phone.
Cover with②the battery cover.
③Push the battery cover towards top.
The charger connector with the left side of the phone
(with the arrow pointing upward).
The charger connector with the electrical source.
The battery capacity indicator in Icon Area will then
flash periodically; when charging at power-off status,
charging indicator on the screen means the phone is
charging now. If you are using a phone in low battery,
it may need certain time for charging indicator to
appear on the screen after starting to charge.
When the Capacity Indicator in Icon Area is full and
doesn't flash any more, the charging process is
complete. If your phone is charged in power off status,
charging complete screen will also display. Charging
process usually takes 1-2.5 hours. Battery, phone and
charger normally turns hot during charging process.
When charging process complete, disconnect
connections between AC power outlet, your phone and
the charger.
Attention:
Be sure to charge in ventilated place with the

8
temperature ranging from -10℃to ＋45℃, and
always use the charger provided by original
manufacturer. Using unauthorized charger may cause
danger, and also violates warranty coverage of the
manufacturer.
Charge your battery in time when the phone
automatically powers off or displays low battery
warning. The phone will automatically decrease
charging time when the battery is not exhausted before
charging.
Insertion of the SIM Card
Metal interface of SIM card is very easy scrape.Before
inserting into the phone you must carefully remove it.
Turn off the phone; remove the battery and unplug
other external power sources.
Insert the SIM card into the SIM slot as shown in the
following picture.
When you need to remove the SIM card, please first
turn off the phone, remove the battery, then remove the
SIM card.

9

Insertion of the Memory Card
Turn off the phone; remove the battery and unplug
other external power sources.
Put the Memory Card into the Memory Card trough.
When you need to remove the Memory Card, please
first turn off the phone, remove the battery, then
remove the Memory Card.
TF CARD

101
Note: FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged
over one gram of tissue. Device types Avvio 505 (FCC
ID: WVB-AVVIO505) has also been tested against this
SAR limit. The highest SAR value reported under this
standard during product certification for use at the ear
is 0.846W/kg and when properly worn on the body is
0.430W/kg. This device was tested for typical
body-worn operations with the back of the handset
kept 1.5cm from the body. To maintain compliance
with FCC RF exposure requirements, use accessories
that maintain a 1.5cm separation distance between the
user's body and the back of the handset. The use of belt
clips, holsters and similar accessories should not
contain metallic components in its assembly. The use
of accessories that do not satisfy these requirements
may not comply with FCC RF exposure requirements,
and should be avoided.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the user’s
authority to operate the equipment.

11
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician
for help.