AXIOMTEK tBOX324-894 User manual

4 9416N324000E
© Copyright 2017 Axiomtek Co., Ltd.
Ver ion A1 September 2017
Printed in Taiwan
DRAM Installation
Step 1 Make sure system power is off, and then loosen the lateral
cover screws as shown.
Step 2 Loosen the lateral screws as shown.
Step 3 Pull out the front bezel and internal bracket as shown.
Step 4 Remove cover to install DRAM and stick thermal pad on it.
Step 5 Secure DRAM cover and install the internal bracket, front
bezel. Follow by fastening the lateral screws as shown to
complete the installation.
tBOX324-894 Quick Installation Guide
9416N324000E 1
© Copyright 2017 Axiomtek Co., Ltd.
Ver ion A1 September 2017
Printed in Taiwan
Checklist

tBOX324
-
894
system u
nit
x
1

HDD/SSD
(
o
ptional)
Quick installation guide x 1
CD x 1 (for Driver & Manual)

Foot Pad x 4

Mini
PCIe c
ard
m
odule
(optional)

Remote Switch cable (optional)

M12 LAN cable(s) (optional)

Screws pack
x
1

Wireless modu
le (optional)

Wallmount
Bracket
x 1

Key x 2

Power terminal block or M12
power cable
x
1
(optional)
DIO (6x2) x1 and COM (5x2) x 2
terminal block
(optional)
Note: Please contact your local suppliers if any damaged or missing items.
Dimensions
tBOX324-894
tBOX324-894 Transportation Fanless Em edded System

2 9416N324000E
© Copyright 2017 Axiomtek Co., Ltd.
Ver ion A1 September 2017
Printed in Taiwan
I/O Outlets
Front View
Rear View
9416N324000E 3
© Copyright 2017 Axiomtek Co., Ltd.
Ver ion A1 September 2017
Printed in Taiwan
Hardware Installtion
SATA drive and CFast Installation
Step 1 Make sure system power is off, and then loosen the screw at
HDD tray as shown.
Step 2 Slide HDD into the cover as picture shown. Insert screws into
each side of the SATA drive through the corresponding holes.
Step 3 Install CFast and SATA drive to the slot.
Step 4 Secure CFast and SATA drive to complete the installation.
Mini PCIe module and SIM card Installation
Step 1 Make sure system power is off, and then loosen the lateral
cover screws as shown.
Step 2 Install the module card and fasten screw, notice the signal
support at mini card slot. Fasten screws.