Axxess AX-DSPX-HYKIA2 User manual

AX-DSPX-HYKIA2
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 8/16/19 INSTAX-DSPX-HYKIA2
Product Info
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Tone generator
TABLE OF CONTENTS
Connections ............................................................2
Installation ......................................................... 3-4
Hyundai/Kia Data Interface with Amplifier
Bypass Harness & DSP 2011-2016
APPLICATIONS
• Designed for SPDIF amplified sound systems
• Includes an amp bypass harness
• Retains BlueLink/UVO voice prompts
• All chimes/voice prompts go through the aftermarket amp
• Adjustable chime level
• Micro-B USB updatable
Hyundai
Elantra 2012-2015
Veloster 2012-2017
Kia
Sportage 2011-2016
• AX-DSP-X
• AX-BASSKNOB
• AX-DSPX-HYKIA2 harness
• AX-DSP-X harness
• Amplifier bypass harness

2
CONNECTIONS
AX-DSP-X
An SPDT relay, Metra part number
E-123, must be used if the amp turn-on
current of all amps exceed 1-amp.
SUB
Factory Amp
(must be removed)
RCA Jacks
(sold separately)
White / Front Left +
White/Black / Front Left -
Gray / Front Right +
Gray/Black Front Right -
Green / Rear Left +
Green/Black / Rear Left -
Purple / Rear Right +
Purple/Black / Rear Right -
AX-BASSKNOB
Blue/White - Amp Turn-On Wire
Red/White - Do Not Use
Brown/Yellow / Front Left Tweeter +
Brown/Blue / Front Left Tweeter -
White/Red / Front Right Tweeter +
Red/White Front Right Tweeter -
Additionable Outputs
For Optional Amps
Update Port
CH 6
CH 10
CH 7
CH 8
CH 9
Additionable Outputs
For Optional Amps
Factory Amp Harness
AX-BASSKNOB
Black/Yellow - Do Not Use
Red/White RCA Jacks - Do Not Use

3
REV. 8/16/2019 INSTAX-DSPX-HYKIA2
1. Locate the factory amp, unplug all connectors, then remove the amp.
Note: Amp location is on the following page.
2. Install the AX-DSPX-HYKIA2 harness and make all necessary connections, but leave the
amp turn-on wire disconnected.
3. Plug the 16-pin and 20-pin connectors from the AX-DSPX-HYKIA2 harness into the
AX-DSPX-X.
4. Download and install the AX-DSP-X app from the Google Play Store or Apple App Store.
5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the
mobile device to the AX-DSPX-X. (Figure A)
6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button
to save the configuration. (Figure B)
7. Connect the amp turn-on wire from the AX-DSPX-HYKIA2 harness. Click the Identify
button to confirm that the AX-DSPX-HYKIA2 is connected properly. If so, a chime will be
heard from the front left speaker. Test all functions of the installation for proper operation .
Note: The outputs may need to be configured within the Outputs tab.
8. Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup
Instructions tab, or online at Axxessinterfaces.com for an explanation of each tab in the app.
I N S TALL AT I O N
Continued on the next page
(Figure A)
(Figure B)

KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
®
Metra recommends MECP
certified technicians
AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 8/16/19 INSTAX-DSPX-HYKIA2
INSTALLATION INSTRUCTIONS
AX-DSPX-HYKIA2
Having difficulties? We’re here to help.
Contact our Tech Support line at:
386-257-1187
Or via email at:
[e-mail]
Tech Support Hours (Eastern Standard Time)
Monday - Friday: 9:00 AM - 7:00 PM
Saturday: 10:00 AM - 7:00 PM
Sunday: 10:00 AM - 4:00 PM
I N S TALL ATIO N (CONT’D)
Amplifier Location
Hyundai
Elantra: Right side of trunk
Veloster: Under passenger seat
Kia
Sportage: Ride side of cargo area