BaByliss PRO RAPIDO BAB7000IE User manual

TM
WITH FERRARI DESIGNED MOTOR
MADE IN ITALY
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Babyliss Pro Rapido
BAB7000IE o cerca il tuo prodotto tra le migliori offerte di Cura della Persona

GETTING TO KNOW YOUR RAPIDO DRYER
The super light, ultra quiet, high-speed RAPIDO dryer with its Pro brushless motor
designed in collaboration with Ferrari, gives fast drying with noise reduction for a truly
advanced professional experience. Ionic conditioners give a smooth, frizz-free, high shine
result.
FEATURES
• 2200W Brushless motor dryer
• Lightweight
• Ionic conditioning for frizz-free styling
• True cold shot
• Low vibration for quieter operation
• Ultra slim concentrator nozzle
• Removable noise reducing rear filter
• 2.7m Power Cord
• Cotton pouch

OPERATING FEATURES
Speed settings
(O, I, II)
Ultra slim
concentrator nozzle
True cold shot
2.7m Power Cord
2200W Motor
Heat settings
(⦁, I, II)
Removable rear
silencer

IMPORTANT SAFETY CAUTIONS
•This appliance should only be
used as described within this
instruction booklet. Please retain
for reference.
IMPORTANT CHILD SAFETY
WARNING! Polythene bags over
a product or package may be
dangerous. To avoid danger of
suffocation, keep this wrapper away
from babies and children. This bag
is not a toy.
WARNING! THIS APPLIANCE GETS
HOT!
•ALWAYS keep out of reach of
children (during and after use and
whilst cooling).
•This appliance should not be
used, cleaned or maintained by
children.
•Always take extra care if used on
children or near children.
•Do not use on very young
children.
IMPORTANT SAFETY
•UK Only: This appliance must
not be used in the bathroom. If
using the appliance in a bathroom,
unplug after use as the proximity
of water can be dangerous even
if the appliance is switched off.
For additional protection the
installation of a residual current
device (RCD) with a rated residual
operating current not exceeding
30mA is advisable in the electrical

circuit supplying the bathroom.
Ask your installer for advice.
WARNING! Do not use this
appliance near water
contained in basins,
bathtubs or other vessels.
•Do not use this appliance
in the bathroom.
•Do not immerse the appliance in
water or other liquids.
•Never look directly into the
barrel of the hairdryer when it is
switched on.
•Always inspect the appliance
before use for noticeable
signs of damage. Do not use
if damaged or if the appliance
has been dropped. In the event
of damage contact the Conair
Customer Care Line (refer to ‘UK
After Sales Service’ section for
further information).
•Do not use the appliance if the
lead is damaged. In the event
of damage contact the Conair
Customer Care Line (refer to ‘UK
After Sales Service’ section for
further information).
•Do not leave the appliance
unattended when switched on
or plugged in.
•This unit is equipped with a
safety thermostat. In the event
of overheating the appliance
will either stop automatically or
run hot and cold intermittently.
Should this happen, switch the
airstyler to the “0” position,
unplug and allow to cool for
10 minutes. Before use, ensure
the rear filter is clear of hair
and other debris. Plug in and
switch on. If the appliance

continues to overheat discontinue
use immediately, switch off and
unplug, and contact the Conair
Customer Care Line (refer to ‘UK
After Sales Service’ section for
further information).
•Take care that the air vents do
not become blocked when in use.
Make sure the rear filter is clear of
hair and other debris before use.
•Do not place the appliance on
any heat sensitive surface whilst in
operation or whilst the product is
cooling.
•Take care to avoid the hot surface
of the appliance coming into
direct contact with the skin, in
particular the ears, eyes, face and
neck.
•This appliance should not be used
by adults whose reduced physical,
sensory or mental capabilities,
or whose lack of experience and
knowledge, might cause a hazard,
unless they have been correctly
instructed to understand the safe
use and hazards involved and are
adequately supervised.
•After use, do not coil the lead
around the appliance as this may
cause damage to the lead. Instead,
coil the lead loosely by the side
of the appliance.
•This appliance complies with
the requirements of Directives
2004/108/EC (Electromagnetic
Compatibility) and 2006/95/
EC (Electrical Safety of Domestic
Appliances).

OPERATING INSTRUCTIONS
The RAPIDO dryer is equipped with a Ferrari designed engine, featuring MaxLife™ PRO
brushless technology. Conventional styling tool motors require carbon brushes to operate.
Friction eventually wears them down and the motor fails. MaxLife™ PRO technology
eliminates the brushes, producing a lighter weight motor that lasts longer – up to 10,000
hours. Rare-earth magnets create an efficient and long-lasting power source within the
engine. Sealed ball bearings reduce vibration and help extend the life of the engine.

1. Shampoo and condition hair. Rinse thoroughly. Towel-blot hair to remove excess
moisture. Section hair. Using the dryer along with a styling brush, direct hot air through
a section of hair at a time. Move dryer steadily across each section so that the hot air
passes through hair. Direct airflow at hair, not scalp.
2. Keep dryer’s air intake vents unobstructed and free from hair while drying.
3. To avoid over-drying and possible damage to hair or skin, do not concentrate heat on
one section for any length of time. Keep dryer moving as you style.
4. When using the dryer to create curls and waves, dry hair almost completely on a
warmer temperature setting, then finish styling with cooler air.
5. This dryer includes concentrator attachments. Use the attachments when you need
drying power in a small area (such as a curl or a wave), or when you want to relax curly
hair.
DRYING BASICS

WARNING
This professional dryer is equipped with a true cold shot button. Do NOT use with the air
inlet against hair, or damage will be caused to internal parts.
Never block the air openings of the appliance. Keep the filter intake free of buildup from
lint, hair and other debris by cleaning regularly.
Allowing the filter to become blocked will decrease performance, shorten the life of the
dryer, and risk voiding the warranty.

NEGATIVE ION GENERATOR
The RAPIDO dryer has a central negative ion generator that generates an exceptional
volume of millions of ions per cm3. Hair is naturally positively charged; this positive
charge is increased during drying and generates static electricity, which causes the scales
of the hair to move away from each other. The surface of hair thus becomes rough and
takes on a lifeless appearance. The negative ions generated by this hair dryer will
neutralize the positive charge and, in this way, remove any static electricity in the hair.
Hair is shiny and easy to style. It has been proven that ionic technology acts as a catalyst
for hair products.
LIGHTWEIGHT AND ERGONOMIC
The RAPIDO dryer has an ergonomic handle for complete comfort during use. Its light
weight and ideal balance make it perfect for the salon.

CLEANING AND MAINTENANCE
The dryer must be kept clean for proper operating performance. When cleaning is
needed, unplug the cord, allow to cool and clean dust and lint from air intake openings
with a small brush or the brush attachment of a vacuum cleaner. The outer surface of the
dryer should be wiped clean with a cloth only.
Blocked or clogged air intake vents will cause the dryer to overheat. If overheating
occurs, an automatic safety device will shut the dryer or the heat off to prevent damage
or personal injury. If the unit or the heat cycles off, turn the dryer off, unplug the cord,
and allow the dryer to cool for 10 to 15 minutes before restarting. Make sure air vents are
clean, by following below steps:
1. Remove intake filter from back of dryer by twisting counterclockwise.
2. Reach through opening, and press the mesh screen to release it from the filter (Fig. 1).
3. Visually inspect the filter to make sure no hair is caught (Fig. 2). Rinse the mesh screen
ONLY under running water to clear any debris. Repeat as needed, or use a stiff bristle
brush for any difficult build-up.

4. Make sure the mesh screen is free from any debris and completely dry. Place screen
into bottom part of removable intake filter (Fig. 3).
5. Press with your finger around the edge of the screen to lock mesh screen in place
(Fig. 4).

UK GUARANTEE
This BaByliss PRO appliance is guaranteed for salon use for 2 years.
This guarantee covers defects under normal use from date of purchase and ceases to be
valid in the event of alteration or repair by unauthorised persons. If the appliance does
not perform satisfactorily due to defects in materials or manufacture, it will be repaired
or replaced through Conair UK After Sales Service. The Conair Group Ltd reserves the
right to amend terms and specifications without prior notice.
This guarantee in no way affects your statutory rights.

UK AFTER SALES SERVICE
For further advice on using the appliance or should you need to return your product,
please contact the Conair Customer Care Line on 03705 133191 (09:00 to 17:00 Monday to
Friday) or email your enquiry to [e-mail].
The return address is:
Customer Care Centre,
Conair Logistics
Unit 4, Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your returns number, name and address details, together with a copy of
proof of purchase and details of the fault.

SAFE DISPOSAL
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it should be handed to an appropriate collection
point for the recycling of Electrical and Electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about the recycling of
this product, please contact your local council office or your household waste disposal
service.

UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the following code:
BLUE = NEUTRAL
BROWN = LIVE
As the colours of the wire in the mains lead of this appliance may not correspond with
the colour marking identifying the terminals on your plug, proceed as follows:
•The wire which is coloured BLUE must be connected to the terminal which is marked
with the letter N.
•The wire which is coloured BROWN must be connected to the terminal which is marked
with the letter L.
•Neither the BLUE nor BROWN wires should be connected to the terminal which is
marked with the letter E or the symbol.
This appliance is supplied fitted with a BS1363 mains plug and a BS1362 13A fuse. If this plug
is removed from the appliance please ensure it is disposed of safely as a disconnected
plug is dangerous if reconnected to the mains. If any other type of plug is used, a 13A fuse
must be fitted.