Balboa BP1600 User manual

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
1
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
BP1600 Tech Sheet
Balboa Water Group
System Part Numbers: 56129-02 3kW 800 Incoloy Element
56130-02 3kW Titanium Element
Compatible Plumbing Kits (Coupling nuts and seals included)
55911 2” Tailpieces (2-Speed Pump 1)
55914 1.5” Tailpieces (2-Speed Pump 1)
55912 1” Tailpiece Inserts (Circ)
55913 One Direct Circ Pump Coupling and one 1” Tailpiece Insert
CE System Model: BP16-BP1600-RCA-3.0KW
Software ID: M100_205 V6
Software Version: 6.0
Hex File: BP1600_6.0_BP16TP4.hex
Configuration Signature: EDD8C3A4
Eng. Project: 3767
Base PCBs / PCBA’s:
Power Board: 22117_B / 56132
Logic Board: 22121_E / 56131-02
Control Panels:
TP600CE 50014-01
TP600 (non-CE) should not be used
Software Version 2.3 and later
TP400T 50260
Software Version 2.4 and later
TP400W 50259
Software Version 2.4 and later
Auxiliary Panels
AX10A2 55919
User Interface and Programming Guide:
http://service.balboa-instruments.com/zz40940_download.zip

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
2
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Part # EPN Date Originator Changes Made
55746
and
55748
3351 03-09-10 Balboa Initial Generic Configuration
800 Incoloy and Titanium models
Initial release
55746-01
and
55748-01
3479 10-11-10 BWG RMA Tester and eFAST compatibility added. Transformer Update
55629
and
55630
N/A 03-03-11 BWG Fix typo on setups with Misc output
56129
and
56130
N/A 08-04-11 BWG Part number corrections
56129-01
and
56130-01
N/A 09-14-11 BWG TP400 support, Auto Linking, Set Time moved to menu
56129-01
and
56130-01
3767 01-10-12 BWG Add iPhone App support.
System Revision History
Service - Input Power Requirements (Circle Letter Assignment)
B240VAC, 60Hz, 48A, Class A GFCI-protected service (Circuit Breaker = 60A max.),
4 wires [hot, hot, neutral, ground]
C120/240VAC, 60Hz, 16/32A, Class A GFCI-protected service (Circuit Breaker = 20/40A max.),
3 or 4 wires [hot, hot (optional), neutral, ground]
D240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker = 50A max.)
4 wires (Hot–Line 1, Hot–Line 2, Neutral, Ground)
A120/240VAC, 60Hz, 16/40A, Class A GFCI-protected service (Circuit Breaker = 20/50A max.),
3 or 4 wires [hot, hot (optional), neutral, ground]
H240VAC, 60Hz, 32A, Class A GFCI-protected service (Circuit Breaker = 40A max.),
4 wires [hot, hot, neutral, ground]
F120VAC, 60Hz, 16A, Class A GFCI-protected service (Circuit Breaker = 20A max.),
3 wires [hot, neutral, ground]
Service - Input Power Requirements (Circle Letter Assignment)
()
B
240VAC, 60Hz, 48A, Class A GFCI-protected service (Circuit Breaker = 60A max.),
4
wires [
h
ot,
h
ot, neutra
l
,
g
roun
d
]
C
1
20
/
240VAC, 60Hz, 16
/
32A, C
l
ass A GFCI-protecte
d
service
(
Circuit Brea
k
er = 20
/
40A max.
)
,
3 or 4 wires [hot, hot
(
optional
)
, neutral, ground]
D
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker = 50A max.)
4
wires
(
Hot–Line 1, Hot–Line 2, Neutra
l
, Groun
d)
A
1
20
/
240VAC, 60Hz, 16
/
40A, C
l
ass A GFCI-protecte
d
service
(
Circuit Brea
k
er = 20
/
50A max.
),
3 or 4 wires [
h
ot,
h
ot
(
optiona
l)
, neutra
l
, groun
d
]
H240VAC, 60Hz, 32A, C
l
ass A GFCI-protecte
d
service
(
Circuit Brea
k
er = 40A max.
)
,
4
wires [hot, hot, neutral, ground]
F
1
20VAC, 60Hz, 16A, Class A GFCI-protected service (Circuit Breaker = 20A max.),
3 wires [
h
ot, neutra
l
,
g
roun
d
]

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
3
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
2” Tailpiece kit PN 55911.
Standard 2” sockets to glue up to 2” PVC pipe.
1.5” Tailpiece kit PN 55914.
1.5” sockets to glue up to 1.5” PVC pipe with the I.D.
Be sure to orient the fittings so that the insert is at the 12:00 position to prevent trapped air.
1” Circ Pump Insert kit PN 55912.
1” barb fittings for use with 1” tubing.
Be sure to orient the fittings so that the insert is at the 12:00 position to prevent trapped air.
1” Circ Pump Insert kit PN 55913.
One fitting for direct coupling to the threaded suction of an appropriately-sized circ pump. A 1” barb fitting for use with 1”
tubing is used on the other end of the heater.
Be sure to orient the fittings so that the insert is at the 12:00 position to prevent trapped air.
Plumbing Fittings
Not Immediately Available.
Not Immediately Available.

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
4
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 16A, (Circuit Breaker rating = 20A max.)
System Ouputs - 16A Service:
Pump 1 230VAC 2-Speed 7.5A max 30-minute timer for Low Speed, 15 Minutes for High Speed
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Low Speed may not exceed 2A max
Pump 2 230VAC 1-Speed 7.5A max 15-minute timer
Ozone 230VAC .5A max Uses the same relay as Pump 1 Low
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 3kW @ 240VAC
Wiring Diagram and Settings
Setup 1-16 – As Manufactured
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC 1A
WS01CE
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
L2
L1
N
F3 10A 250V F2 3A 250V
T 150mA 250V
F6 J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
F5 T 30A
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
CONTROL PANEL
TO J33 AUX
TO J5
S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
NOT USED
2S PUMP 1
1S PUMP 2
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN
DIP Switch Option Orig. Setup 1 Changes to
Special Amperage Rule ON. . . . . . . . . . . . DIP Switch 5 OFF . . . . . . .DIP Switch 5 ON
Use this only in cases where there is an overcurrent condition due to pump size.
This setting will not allow Pump 1 High and Pump 2 to run at the same time.

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
5
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 32A, (Circuit Breaker rating = 40A max.)
System Ouputs - 32A Service:
Pump 1 230VAC 2-Speed 12A max 30-minute timer for Low Speed, 15 Minutes for High Speed
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Pump 2 230VAC 1-Speed 12A max 15-minute timer
Ozone 230VAC .5A max Uses the same relay as Pump 1 Low
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 3kW @ 240VAC
Misc. J2 & J32 230VAC 4A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 1-32
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC 1A
WS01CE
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
L2
L1
N
F3 10A 250V F2 3A 250V
T 150mA 250V
F6 J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
F5 T 30A
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
CONTROL PANEL
TO J33 AUX
TO J5
S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
NOT USED
2S PUMP 1
1S PUMP 2
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN
Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J2 & J32 . . . . . . . . . . . . . . . . . . . . . . . Hot Output . . . . . . . . . . .Useable
DIP Switch Option Orig. Setup 1 Changes to
Add 1 High Speed Pump with Heat . . . . . . DIP Switch 2 OFF . . . . . . .DIP Switch 2 ON

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
6
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 16A, (Circuit Breaker rating = 20A max.)
System Ouputs - 16A Service:
Pump 1 230VAC 1-Speed 6.5A max 15-minute timer
Pump 2 230VAC 1-Speed 6.5A max 15-minute timer
Circ Pump 230VAC 1-Speed 2A max Programmable Filtration Cycles + Polling
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Ozone 230VAC .5A max Uses the same relay as the Circ Pump
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 3kW @ 240VAC
Wiring Diagram and Settings
Setup 2-16
Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Speed Pump 1 . . . . . . .1-Speed Pump 1
J21 . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Used (non-circ) . . . . .Circ Pump Enabled
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC .25A LED
WS02CE
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
L2
L1
N
F3 10A 250V F2 3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
T 150mA 250V
F5 T 30A S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
CIRC
1S PUMP 1
1S PUMP 2
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
7
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 32A, (Circuit Breaker rating = 40A max.)
System Ouputs - 32A Service:
Pump 1 230VAC 1-Speed 12A max 15-minute timer
Pump 2 230VAC 1-Speed 12A max 15-minute timer
Circ Pump 230VAC 1-Speed 2A max Programmable Filtration Cycles + Polling
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Ozone 230VAC .5A max Uses the same relay as the Circ Pump
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 3kW @ 240VAC
Misc. J2 & J32 230VAC 3A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 2-32
Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Speed Pump 1 . . . . . . .1-Speed Pump 1
J21 . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Used (non-circ) . . . . .Circ Pump Enabled
J2 & J32 . . . . . . . . . . . . . . . . . . . . . . . Hot Output . . . . . . . . . . .Useable
DIP Switch Option
Add 1 High Speed Pump with Heat . . . . . . DIP Switch 2 OFF . . . . . . .DIP Switch 2 ON
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC .25A LED
WS02CE
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
L2
L1
N
F3 10A 250V F2 3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
T 150mA 250V
F5 T 30A S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
CIRC
1S PUMP 1
1S PUMP 2
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
8
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 16A, (Circuit Breaker rating = 20A max.)
System Ouputs - 16A Service:
Pump 1 230VAC 2-Speed 10A max 30-minute timer for Low Speed, 15 Minutes for High Speed
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Low Speed may not exceed 2A max
Blower 230VAC 1-Speed 4A max 15-minute timer
Ozone 230VAC .5A max Uses the same relay as Pump 1 Low
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 3kW @ 240VAC
Wiring Diagram and Settings
Setup 3-16
Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Blower
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC .25A LED
WS03CE
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
L2
L1
N
F3 10A 250V F2 3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
T 150mA 250V
F5 T 30A S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
NOT USED
2S PUMP 1
BLOWER
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
9
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 32A, (Circuit Breaker rating = 40A max.)
System Ouputs - 32A Service:
Pump 1 230VAC 2-Speed 12A max 30-minute timer for Low Speed, 15 Minutes for High Speed
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Blower 230VAC 1-Speed 4A max 15-minute timer
Ozone 230VAC .5A max Uses the same relay as Pump 1 Low
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 3kW @ 240VAC
Misc. J2 & J32 230VAC 3A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 3-32
Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Blower
J2 & J32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hot Output . . . . . . . . . . . . . . . . Useable
DIP Switch Option
Add 1 High Speed Pump with Heat . . . . . . . . . . . . . . . . . . . . . . DIP Switch 2 OFF . . . . . . . . . . . . DIP Switch 2 ON
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC .25A LED
WS03CE
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
L2
L1
N
F3 10A 250V F2 3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
T 150mA 250V
F5 T 30A S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
NOT USED
2S PUMP 1
BLOWER
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
10
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 16A, (Circuit Breaker rating = 20A max.)
System Ouputs - 16A Service:
Pump 1 230VAC 1-Speed 8A max 15-minute timer
Blower 230VAC 1-Speed 4A max 15-minute timer
Circ Pump 230VAC 1-Speed 2A max Programmable Filtration Cycles + Polling
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Ozone 230VAC .5A max Uses the same relay as the Circ Pump
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 4kW @ 240VAC
Wiring Diagram and Settings
Setup 4-16
Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Speed Pump 1 . . . . . . . . . . . . 1-Speed Pump 1
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Blower
J21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Used (non-circ) . . . . . . . . . . Circ Pump Enabled
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC .25A LED
WS04CE
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
L2
L1
N
F3 10A 250V F2 3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
T 150mA 250V
F5 T 30A S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
CIRC
1S PUMP 1
BLOWER
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
11
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 32A, (Circuit Breaker rating = 40A max.)
System Ouputs - 32A Service:
Pump 1 230VAC 1-Speed 12A max 15-minute timer
Blower 230VAC 1-Speed 4A max 15-minute timer
Circ Pump 230VAC 1-Speed 2A max Programmable Filtration Cycles + Polling
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Ozone 230VAC .5A max Uses the same relay as the Circ Pump
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 4kW @ 240VAC
Misc. J2 & J32 230VAC 4A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 4-32
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Speed Pump 1 . . . . . . . . . . . . 1-Speed Pump 1
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Blower
J21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Used (non-circ) . . . . . . . . . . Circ Pump Enabled
J2 & J32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hot Output . . . . . . . . . . . . . . . . Useable
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC .25A LED
WS04CE
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
L2
L1
N
F3 10A 250V F2 3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
T 150mA 250V
F5 T 30A S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
CIRC
1S PUMP 1
BLOWER
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
12
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 16A, (Circuit Breaker rating = 20A max.)
System Ouputs - 16A Service:
Pump 1 230VAC 2-Speed 12A max 30-minute timer for Low Speed, 15 Minutes for High Speed
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Low Speed may not exceed 2A max
Ozone 230VAC .5A max Uses the same relay as Pump 1 Low
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 3kW @ 240VAC
Wiring Diagram and Settings
Setup 5-16
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Not Used
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC .25A LED
WS05CE
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
L2
L1
N
F3 10A 250V F2 3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
T 150mA 250V
F5 T 30A S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
NOT USED
2S PUMP 1
NOT USED
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
13
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 32A, (Circuit Breaker rating = 40A max.)
System Ouputs - 32A Service:
Pump 1 230VAC 2-Speed 12A max 30-minute timer for Low Speed, 15 Minutes for High Speed
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Ozone 230VAC .5A max Uses the same relay as Pump 1 Low
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 3kW @ 240VAC
Misc. J2 & J32 230VAC 4A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 5-32
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Not Used
DIP Switch Option
Add 1 High Speed Pump with Heat . . . . . . . . . . . . . . . . . . . . . . DIP Switch 2 OFF . . . . . . . . . . . . DIP Switch 2 ON
J2 & J32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hot Output . . . . . . . . . . . . . . . . Useable
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC .25A LED
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
WS05CE
S1 SWITCH # 50A MAX SETTINGS
L2
L1
N
F3 10A 250V F2 3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
T 150mA 250V
F5 T 30A S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
NOT USED
2S PUMP 1
NOT USED
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
14
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 16A, (Circuit Breaker rating = 20A max.)
System Ouputs:
Pump 1 230VAC 1-Speed 12A max 15-minute timer
Circ Pump 230VAC 1-Speed 2A max Programmable Filtration Cycles + Polling
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Ozone 230VAC .5A max Uses the same relay as the Circ Pump
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 3kW @ 240VAC
Wiring Diagram and Settings
Setup 6-16
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Speed Pump 1 . . . . . . . . . . . . 1-Speed Pump 1
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Not Used
J21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Used (non-circ) . . . . . . . . . . Circ Pump Enabled
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC .25A LED
WS06CE
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
L2
L1
N
F3 10A 250V F2 3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
T 150mA 250V
F5 T 30A S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
CIRC
1S PUMP 1
NOT USED
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
15
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
Single Service [3 wires (line, neutral, ground)]
230VAC, 50Hz, 1þ, 32A, (Circuit Breaker rating = 40A max.)
System Ouputs:
Pump 1 230VAC 1-Speed 12A max 15-minute timer
Circ Pump 230VAC 1-Speed 2A max Programmable Filtration Cycles + Polling
This is the heater pump
Must deliver a minimum of 20 GPM through heater
Ozone 230VAC .5A max Uses the same relay as the Circ Pump
Spa Light 10VAC On/Off 1A max 4-Hour timer.
Heater 3kW @ 240VAC
Misc. J2 & J32 230VAC 3A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 6-32
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Speed Pump 1 . . . . . . . . . . . . 1-Speed Pump 1
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Not Used
J21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Used (non-circ) . . . . . . . . . . Circ Pump Enabled
J2 & J32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hot Output . . . . . . . . . . . . . . . . Useable
DIP Switch Option
Add 1 High Speed Pump with Heat . . . . . . . . . . . . . . . . . . . . . . DIP Switch 2 OFF . . . . . . . . . . . . DIP Switch 2 ON
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
J15: SPA LIGHT
BELEUCHTUNG
ECLAIRAGE BAIN HYDRO
10VAC .25A LED
FOR SUPPLY CONNECTIONS,
USE CONDUCTORS SIZED ON THE
BASIS OF 60°C AMPACITY BUT
RATED MINIMUM OF 90°C.
TORQUE RANGE FOR MAIN TERMINAL BLOCK (TB1):
27-30 IN. LBS. (31.1-34.5 kg cm)
USE COPPER CONDUCTORS ONLY
EMPLOYER UNIQUEMENT
DES CONDUCTEURS DE CUIVRE.
WS06CE
S1 SWITCH # 50A MAX SETTINGS
L2
L1
N
F3 10A 250V F2 3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
T 150mA 250V
F5 T 30A S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
CIRC
1S PUMP 1
NOT USED
GRN
3.0 kW
HEATER
HEIZELEMENT
RADIATEUR
N
L1
N/A
ADDED JUMPER FOR
CE INSTALLATIONS
BLU
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
16
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Setup Changes with DIP Switch 1 ON
As soon as Switch #1 is placed
in the ON position,
The temperature will show
“T” after it instead of F or C,
indicating the System is
in Test Mode
1
S1
6
J17
J16
J29 VAC
J28 AUX FRZ
ON
DANGER! HIGH VOLTAGE WILL BE ACCESSIBLE!
SERVICE TECHNICIAN ONLY!
Move DIP Switch 1 (on S1 on the Logic circuit
board) to ON.
The system will enter Test Mode.
Moving DIP Switch 1 to OFF will exit Test Mode.
Read and understand these instructions before beginning this process.
Know the Setup Number you want before you power up the spa and wait to power up the spa until you’re ready to change
the Setup Number.
The system must be in Test Mode, so move Switch 1 to the ON position. The Test Menu will then be available.
Power up the spa, and press any button once to Link the panel. (Note: Switch 1 can be moved to the ON position immedi-
ately after power-up, if preferred - Danger! High Voltage will be present!)
You will have 1 minute to complete the setup change after you manually exit Priming Mode. (Once familiar with the pro-
cess, the Setup change should take less than 15 seconds.)
When the panel displays RUN PMPS PURG AIR, press any Temperature button ONCE to exit Priming Mode.
You should see “---T” where the T indicates the system is in Test Mode.
Continued on Next Page.
READY RANGE

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
17
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Setup Changes – Continued
SET SET
The System will reset and go into Priming Mode if the Light Button
is pressed while anything other than the current setup is flashing.
If there is no change to the Setup Number (S-01, S-02, etc.),
the display returns to the SETP screen.
Several Setups can
exist in in this string
A dash (--) indicates the current Setup.
SET
SET SET
SET SET
SET SET
While the Set Temperature is
still flashing, press Light
TEST will now appear in
the LCD first.
SET RANGE
Main Screen
READY RANGE FLTR1
Main Screen
READY RANGE FLTR1
SET
Approx.
5 sec.
or
Approx.
5 sec.
or
SET
SET
SET
SET
When set to ON, Panel will display
alternate readings from
Senor A and Sensor B
on Main Screen
Displays Fault Log
Again, You will have 1 minute to complete the setup change after you manually exit Priming Mode.
Immediately after exiting Priming Mode, press this sequence of buttons: Warm*, Light, Warm, Warm, Warm, Warm. Continue
to press Warm until the diplay shows the Setup Number (S-01, S-02, etc.) you want to switch to. When the correct setup
number is showing, press Light once, and the system will reset, using the newly-selected Setup from that point on.
Move DIP Switch 1 to the OFF position to take the spa out of Test Mode. °F or °C will replace °T.
Using a permanent marker, write the Setup number on the Setup label mounted inside the system
lid (right). This is very important to any service person in the future who may need to replace a
circuit board or system and needs to change the Setup on a replacement part while in the field.
NOTE: Changing the Setup may require wiring changes as well - refer to the wiring diagram or wiring
diagram addendum.
THIS SYSTEM IS
CONFIGURED AS
SETUP #
*If the Control Panel does not have a Warm (Up) button, but rather a single
Temp button, use the Temp button in place of the Warm button in the instruction
above. (The flow chart assumes a single Temperature Button.)
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel configuration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time - varies depending on function

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
18
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
The wiring diagram in the system show connections for TN and TT electrical services (Line, Neutral, Ground).
IT Power Requirements:
Single Service [3 wires (line, line, ground)]
230VAC, 50Hz, 1þ, 16A/32A, (Circuit Breaker rating = 20A/40A max.)
Protective Earth Wire (Green/Yellow) must be connected to system ground terminal as marked.
All equipment (pumps, blower, and heater) runs on service line L1 with L2 acting as the return - 230VAC.
Set the DIP switches according to the wiring diagram so that total system current draw never exceeds the rated service
input when using a particular setup.
Three Service [4 wires (line, line, line, ground)]
230VAC, 50Hz, 1þ, 16A/32A, (Circuit Breaker rating = 20A/40A max.)
Protective Earth Wire (Green/Yellow) must be connected to system ground terminal as marked.
All equipment (pumps, blower, and heater) runs on service line L1 with L2 acting as the return - 230VAC.
Set the DIP switches according to the wiring diagram so that total system current draw never exceeds the rated service
input when using a particular setup.
IT Electrical System (No Neutral)
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.
L2
L1
N
GRN
L2
L1
N/A
BRN
BRN
L2
L1
N
GRN
L2
L1
L3
N/A
BRN
BRN
LINE 3 - CAP (INSULATE) END.
DO NOT CONNECT.
BRN

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
19
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Configuration Options
General Features
Feature Default Options Increment
Pump 1 in Filter Cycle (Circ Only) No Yes, No
Pump 1 Low Timer 30 Minutes Between 5 and 240 minutes 1 Minute
General Pump Timer 15 Minutes Between 5 and 60 minutes 1 Minute
Blower Timer 15 Minutes Between 5 and 60 minutes 1 Minute
Mister Timer (N/A) 15 Minutes Between 5 and 60 minutes 1 Minute
Light Timer 240 Minutes Between 5 and 240 minutes 1 Minute
Circ Like P1 Low See Circ Pump Note N/A
Circ Pump can be set with the following functions:
24 hr – 24 hr w/3° shutoff – Acts like P1 Low (filters, polls, etc. - Requires a single-speed P1)
Cleanup Cycle 30 Minutes Between 30 and 240 minutes 30 Minutes
- or OFF
Cleaup as Preference setting Yes Yes, No N/A
Ozone With Heater Pump* Always, Filters/Cleanup Only N/A
Ozone Suppression OFF Between 30 and 120 min. 1 Minute
- or OFF
Pump Purge 60 Seconds Between 30 and 600 seconds 5 Seconds
Blower Purge 30 Seconds Between 5 and 300 seconds 5 Seconds
Mister Purge (N/A) 5 Seconds Between 5 and 300 seconds 5 Seconds
Blue Indicates New Custom Configuration Default (Setup 1)
* The Heater Pump can be either a Circ Pump or Pump 1 Low.
O
p
tions Increment
Yes, No
Between 5 and 240 minutes 1 Minute
Between 5 and 60 minutes 1 Minute
Between 5 and 60 minutes 1 Minute
Between 5 an
d
60 minutes 1 Minut
e
Between 5 an
d
240 minutes 1 Minute
See Circ Pum
p
Not
e
N
/
A
B
et
w
ee
n
30
a
n
d
2
40
min
utes
30
Min
utes
- or OF
F
Yes, No N
/A
Always, Filters/Cleanup Only N/A
Between 30 an
d
120 min. 1 Minute
-
o
r
O
F
F
Between 30 and 600 seconds 5 Second
s
Between 5 an
d
300 secon
d
s 5 Secon
ds
Between 5 an
d
300 secon
d
s 5 Secon
d
s
C
irc Pump can be set with the following functions:
2
4 hr – 24 hr w/3° shutoff – Acts like P1 Low
(
filters, polls, etc. - Requires a single-speed P1
)

Template 40941_J 04-02-10 56129-02/56130-02_97_B 04-16-12
20
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Configuration Options
Temperature Features
Feature Default Options Increment
Temperature Display °C °C, °F
All temperatures must be specified in °F. The system converts °F to °C dynamically. If Celsius is required for default settings,
choose a desired °C value that (after rounding) corresponds to a Fahrenheit value.
°C 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
°F 39 41 43 45 46 48 50 52 54 55 57 59 61 63 64 66 68 70 72
°C 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
°F 73 75 77 79 81 82 84 86 88 90 91 93 95 97 99 100 102 104
Hi-Range Min. Set Temp 80°F Between 50 and 80°F 1°F
Hi-Range Max. Set Temp 104°F Between 60 and 104°F 1°F
Hi-Range Default Temp* 100°F Between 50 and 104°F 1°F
Lo-Range Min. Set Temp 50°F Between 50 and 80°F 1°F
Lo-Range Max. Set Temp 99°F Between 60 and 99°F 1°F
Lo-Range Default Temp* 70°F Between 50 and 99°F 1°F
Freeze Threshold 44°F Between 39 and 54°F 1°F
Temp Lock Type Temp + Settings Temp, Temp + Settings N/A
Time Features
Feature Default Options Increment
Time Format* 24 Hour 12 Hour, 24 Hour N/A
Filter 1 Start Hour* 8:00 PM (20:00) 00:00 to 23:00 1 Hour
Filter 1 Duration* 2 Hours Between 15 Min and 23:45 15 Minutes
-or continuous
Filter Cycle 2 Default* OFF OFF, ON N/A
Filter 2 Start Hour* 8:00 AM (08:00) 00:00 to 23:00 1 Hour
Filter 2 Duration* 15 Minutes Between 15 Min and 23:45 15 Minutes
-or Continuous, or Disabled
Light Cycle Disabled Disabled, Enabled N/A
Light Cycle Default* OFF OFF, ON N/A
Light Cycle Start Hour* 9:00 PM (21:00) 00:00 to 23:00 1 Hour
Light Cycle Duration* 15 Minutes Between 15 Min and 04:00 15 Minutes
-or or Disabled
Blue Indicates New Custom Configuration Default (Setup 1)
*May be changed by end-user (if Enabled)
O
p
tions Increment
°
C
, °
F
Between 50 and 80°F 1°F
Between 60 and 104°F 1°F
Between 50 and 104°F 1°F
Between 50 an
d
80°F 1°F
Between 60 an
d
99°F 1°F
Between 50 and 99°F 1°F
B
et
w
ee
n
39
a
n
d
54
°F 1°
F
Temp, Temp + Settings N
/
A
Opt
i
ons Increment
12 Hour, 24 Hour N
/A
00:00 to 23:00 1 Hou
r
B
et
w
ee
n 1
5
Min
a
n
d
2
3:45
1
5
Min
utes
-
o
r
co
n
t
in
uous
OFF, ON N/A
00:00 to 23:00 1 Hou
r
Between 15 Min an
d
23:45 15 Minute
s
-or Continuous
,
or Disa
bl
e
d
Disa
bl
e
d
, Ena
bl
e
d
N
/
A
OFF, ON N
/
A
00:00 to 23:00 1 Hou
r
Between 15 Min and 04:00 15 Minute
s
-
o
r
o
r Di
sabled