Balt Presentation cart User manual

123456789012345678901234567890121234567890123456789012345678901212345678901

Presentation Cart

AV Cart w/Adjustable Height Shelf

Assembly Instructions

P1 Leg Assembly Right 1 EA

P2 Leg Assembly Left 1 EA

P3 LCDPlatform 1 EA

P4 LaptopShelf 1 EA

P5 LowerShelf 1 EA

P6 Middle Shelf 1 EA

P7 Stability Panel 1 EA

P8 AngleBracket 4 EA

Part Drawing Description Qty Part Drawing Description Qty

WOW AV Cart w/Adjustable

Height Shelf

Presentation Cart

We recommend that you assemble this

unit on a table.

Toolsrequired: Adjustable Crescent Wrench

Do not use unless all screws are tight. At least every six months, check all screws to be sure

they are tight. If parts are missing, broken, damaged, or worn, stop use of the product

until repairs are made by your dealer using factory authorized parts.

Missing Parts or UPS Damaged Parts

ForYourConvenienceyoucan

EMAILus at

[email protected]

24HOURS 7 DAYS A WEEK

Hardware List

A 9/16”Socket Screw 20 EA

B 2-1/2” Socket Screw 4 EA

C SquareNut 4 EA

D 3”LockingCaster 2 EA

E 3”Caster 2 EA

E Plastic Grommet 2 EA

F Allen Wrench 1 EA

G Caster Wrench 1 EA

P-9 Right Shelf Bracket 1 EA

P-10 Left Shelf Bracket 1 EA

Optional Electrical Outlet 1 EA

W/CordWinder

PresentationCart

AssemblyDiagram

IdentifyandSeparate allthe Partsand Hardware.

Placethe LCD Platform (P-3) withthe insert nutsfacing up. Attach1 Right Leg

Assembly (P-1) and 1 Left Leg Assembly (P-2) using 4 each (A) screws.

(Finger tighten only)

Illustration # 1

1.)

2.)

3.)

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

P-1

P-3

P-2

AttachStability Panel (P-7) to

Right & Left Leg Assemblies

(P-1 & P-2) using 4 (A) Screws

asshownin illustration#1.

(Finger tighten only)

Should you require assistance

duringassembly,

please call our Customer Service

Department Monday - Friday

8 a.m. - 5 p.m.

CentralStandard Time

1-800-749-2258

Align 4 each Angle Brackets (P-8) with the edge of the Middle

Shelf(P-6) and attach using 4 each (A)Screwsasshown in

illustration#2.

(Finger tighten only)

Illustration # 2

Illustration # 3

4.)

5.)

P-8

P-6

P-8

Attach Right Shelf Bracket (P-9) and Left Shelf

Bracket (P-10) to Laptop Shelf (P-4) using

4 Flat Head screws (A) as shown in illustration # 4.

P-4 A

P-10

P-9

(Tighten all the screws at this time

using Allen Wrench (F)).

Slide Middle Shelf (P-6) BetweenRight &

Left Leg Assemblies (P-1 & P-2) and

attachMiddle Shelf (P-5)using 4 each(A)

screwsand 4 each (C) Square Nuts as

showninillustration #4.

Illustration # 4

Attach 2 Locking Casters (D)

tothe front, and 2 Casters (E)

tothe backof theunit.

Tightenall Castersusing

CasterWrench(G).

AttachLower Shelf(P-5) to the Right &Left

Leg Assemblies (P1 & P2) using 4 each (B)

screwsas shownin illustration# 4.

(Finger tighten only)

6.)

7.)

8.)

9.)

P-6

P-5

CP-2

P-1

6PresentationCart-01/02/04

TheBaltproductyou havepurchasedisguaranteedagainst materialandworkmanshipdefects. This

guaranteeextends1yearfrom dateofpurchase. Shouldthisproductfail tofunctionsatisfactorilyundernormal

usedue todefector imperfection,the defectivepartor productwill bereplaced. Damagecaused bycommon

carriersduringshipmentisnotincludedinthisguarantee.

This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or

impliedshallapply. FailuretofollowinstructionsfoundinImportant InformationSectionofOwner

Sheetshallvoid the guarantee. Consequentialorincidental damages and orcostsare not refundable.

Important

Cap

Grommet(E) installation

Illustration # 5

Toinstall Grommets (E)in LCD Platform(P-3) and MiddleShelf (P-6), separateparts and

pressGrommet Sleevein rectangularopenings asshown in illustration # 5.

Snap 2 plastic Caps over top of Sleeve as shown in illustration # 5.

Cap

Sleeve

Grommet (E)

Sleeve

Cap

10.)

11.)

P-3

P-6

Optional

ElectricOutlet

AssemblyDiagram

Parts/Hardware List

EL-1 Electric Outlet 1 EA

EL-2 Metal Bracket w/Cord Winder 1 EA

EL-3 PhillipsHead Screw 2 EA

EL-4 HexNut 2 EA

Slide Metal Bracket over the Electrical Outlet

(EL-1) as shown. (note that Metal Stop is at

the end with the electrical Plug-in.)

Attach Metal Bracket (EL-2) to theRight or

Left Leg Assembly (P-1 or P-2) using

2 Phillips Head Screws (EL-3) and 2 Hex

Nuts (EL-4) as shown in Optional

Electrical illustration.

Metal

Stop

Electrical

Plug-in

EL-1

This Electrical Outlet is Part # 66450

and must be purchased separately

Please contact our Customer

ServiceDepartment

Monday - Friday

8 a.m. - 5 p.m.

CentralStandard Time

1-800-749-2258

EL-4

EL-2

EL-3

IdentifyandSeparate allthe Parts

andHardware.

1.)

2.)

3.)

Optional Electrical

Illustration

Table of contents

Popular Indoor Furnishing manuals by other brands

APRILIA

APRILIA ALM 9905 instruction manual

PHI VILLA

PHI VILLA IF-432A instruction manual

Germania

Germania 0019 Assembly instruction

Möbelix

Möbelix BERGAMO 2Q-HAEEC Assembly instructions

Protac

Protac SenSit Straight Directions for use

Canadel

Canadel QUI2SACZ078 Assembly

Hoppekids

Hoppekids 36-4527-82-000 Assembly instruction

BENE

BENE LOCKER S quick start guide

DURAVIT

DURAVIT XSquare XS 7013 Mounting instructions

DREAMS

DREAMS Kyoto TV Bed Assembly instruction

BRW

BRW MONEZ 70 Assembly instructions

RiverRidge

RiverRidge 02-403 Assembly instructions

BOBOCHIC

BOBOCHIC ORION Assembly instructions

Trasman

Trasman 5021 DGAME Assembly manual

Func

Func COOEE WALL Assembly guide

REA&AVA

REA&AVA REA Kira 90 Assembly instructions

Pitarch

Pitarch 1110 Assembly instructions

Songmics

Songmics RCTG101 manual

Balt Presentation Cart User manual

Popular Indoor Furnishing manuals by other brands