banks 63344 User manual

2/7/19 PN 97678 V.1.0
Dual Gauge Pod
Install Manual
Universal Fitment
THIS MANUAL IS FOR USE WITH PART NUMBER 63344
Gale Banks Engineering
546 Duggan Avenue • Azusa, CA 91702
[phone] • Fax [phone]
Product Information & Sales: [phone]
Customer Support: [phone]
Installation Support: [phone]
bankspower.com
©2019 Gale Banks Engineering
Owner’sManual
with Installation Instructions

297678 v.1.0
Figure 1,
Exploded View
Figure 2,
Assembled
8
5
3
2
7
4
4
Section 1
General Assembly: 63344
1Mounting Arm, 17mm Ball 63344-3 1
2Nut, Thumb, M24x2, Plastic 63344-4 1
3Friction Pad 63344-5 1
4Housing, 52mm Gauge Pod 63341-1 2
5Dual Gauge Pod Connector 63344-6 1
6Mount, Sticky Base, With Banks Lever 63341-6 1
6.1 Suction Cup Base — 1
6.2 Bolt, Carriage, M4x0.7 X 48mm, Black — 1
6.3 Nut, Thumb, M4x0.7 — 1
7Screw, Socket Head Cap, 8-32 X 1-1/8 Zinc 91927 2
Item Description Part# Qty
6.3
1
6.2
6.1

97678 v.1.0 3
1. Before starting work, familiarize
yourself with the installation
procedure by reading all of the
instructions.
2. The exploded views (See Figure
1 & Figure 2) provide only general
guidance. Refer to each step and
section diagram in this manual for
proper instruction.
1. Insert the Nut
into the bottom of
the Gauge Pod.
See Figure 3.
2. Slide the Gauge
Pod into the
Dual Gauge Pod
Connector, and line
up the holes from the top. Now, insert
the bolts from the top and tighten
down. See Figure 4.
3. Insert the rubber friction pad
into the back of the Dual Gauge Pod
Connector. See Figure 5 Make sure
the orientation of the friction pad is
correct. See Figure 6.
4. Place the nut on the head of the
Mount Arm, then push the Dual Gauge
Pod Connector and the Mount Arm
together. After, tighten the nut. See
Figure 7.
Figure 4 Figure 7
Figure 6
Figure 5
1.0 ASSEMBLY
Dear Customer,
If you have any questions concerning the installation of your
Banks Dual Gauge Pod, please call our Technical Service Hotline
[phone] between 7:00 am and 4:00 pm (PT).
If you have any questions about shipping or billing, please contact our
Customer Service Department [phone].
Thank you.
Figure 3

Gale Banks Engineering
546 Duggan Avenue • Azusa, CA 91702
[phone] • Fax [phone]
Product Information & Sales: [phone]
Customer Support: [phone]
Installation Support: [phone]
bankspower.com