Barco CX-50 User manual

ENABLING BRIGHT OUTCOMES
Installation manual
CX-50

Registered office: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
Barco NV
Beneluxpark 21, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com

Changes
Barco provides this manual 'as is' without warranty of any kind, either expressed or implied, including but not
limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make
improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time
without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made
to the information in this publication; these changes are incorporated in new editions of this publication.
The latest edition of Barco manuals can be downloaded from the Barco web site www.barco.com or from the
secured Barco web site https://www.barco.com/en/signin.
Copyright ©
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be
recorded, transmitted or stored in a retrieval system without the prior written consent of Barco.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights
of their respective holders. All brand and product names mentioned in this manual serve as comments or
examples and are not to be understood as advertising for the products or their manufacturers.
Trademarks
USB Type-CTM and USB-CTM are trademarks of USB Implementers Forum.
HDMI Trademark Notice
The terms HDMI, HDMI High Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product Security Incident Response
As a global technology leader, Barco is committed to deliver secure solutions and services to our customers,
while protecting Barco’s intellectual property. When product security concerns are received, the product
security incident response process will be triggered immediately. To address specific security concerns or to
report security issues with Barco products, please inform us via contact details mentioned on
https://www.barco.com/psirt. To protect our customers, Barco does not publically disclose or confirm security
vulnerabilities until Barco has conducted an analysis of the product and issued fixes and/or mitigations.
Patent protection
Please refer to www.barco.com/about-barco/legal/patents
Guarantee and Compensation
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of
guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during
transport, as well as for material and manufacturing faults Barco must be informed immediately in writing of
any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on
the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of
complaint, Barco can repair the fault or provide a replacement at its own discretion within an appropriate
period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the
purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for
direct or indirect damage, and also damage attributed to the operation of software as well as to other services
provided by Barco, being a component of the system or independent service, will be deemed invalid provided
the damage is not proven to be attributed to the absence of properties guaranteed in writing or due to the
intent or gross negligence or part of Barco.
If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the
goods are handled incorrectly, in particular if the systems are operated incorrectly or if, after the transfer of
risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the
purchaser will be rendered invalid. Not included in the guarantee coverage are system failures which are

attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear
as well as normal maintenance are not subject to the guarantee provided by Barco either.
The environmental conditions as well as the servicing and maintenance regulations specified in this manual
must be complied with by the customer.
Barco ClickShare Product Specific End User License Agreement1
THIS PRODUCT SPECIFIC USER LICENSE AGREEMENT (EULA) TOGETHER WITH THE BARCO
GENERAL EULA ATTACHED HERETO SET OUT THE TERMS OF USE OF THE SOFTWARE.
PLEASE READ THIS DOCUMENT CAREFULLY BEFORE OPENING OR DOWNLOADING AND USING
THE SOFTWARE.
DO NOT ACCEPT THE LICENSE, AND DO NOT INSTALL, DOWNLOAD, ACCESS, OR OTHERWISE COPY
OR USE ALL OR ANY PORTION OF THE SOFTWARE UNLESS YOU CAN AGREE WITH ITS TERMS AS
SET OUT IN THIS LICENSE AGREEMENT.
1. Entitlement
Barco ClickShare (the “Software”) offered as a wireless presentation solution that includes the respective
software components as further detailed in the applicable Documentation.
The Software can be used upon purchase from, and subject to payment of the relating purchase price to, a
Barco authorized distributor or reseller of the ClickShare base unit and button or download of the authorized
ClickShare applications (each a “Barco ClickShare Product”).
•Term
The Software can be used under the terms of this EULA from the date of first use of the Barco ClickShare
Product, for as long as you operate such Barco ClickShare Product.
•Deployment and Use
The Software shall be used solely in association with a Barco ClickShare Product in accordance with the
Documentation issued by Barco for such Product.
2. Support
The Software is subject to the warranty conditions outlined in the Barco warranty rider. Maintenance, including
the provision of upgrades and updates to the Software, and helpdesk support are available at your option on
the terms of Barco’s then current warranty rider.
Higher maintenance and support levels can be obtained at the moment of product sale or during the Barco
ClickShare Product and/or Software warranty term.
Higher maintenance and support levels may be included in the initial transaction if ordered and paid for
additionally. It is strongly suggested to maintain the maintenance and support agreement without interruption.
Barco reserves the right not to restart maintenance following an interruption by the customer.
3. Terms of Use
The Software can be used as set out in the Barco EULA attached hereto.
The provisions of this Product Specific EULA override the Barco generic EULA in case of conflicts or
inconsistencies.
In case of (inadvertent or other) non-compliance (e. g. where the actual use overshoots the use authorized
hereunder), Barco shall have the option to suspend access to the Software until the non-compliance is
remedied, failing of which Barco may terminate the License Agreement as set out herein.
4. Privacy
You are controller for personal data which are being processed via the Software. Therefore, you remain solely
responsible for complying with all applicable data protection laws and for implementing and maintaining
privacy protection and security measures (especially for components that you provide or control). Barco
disclaims any liability in this regard.
Barco created a specific privacy policy for the ClickShare software application for mobile devices, which
describes the processing of personal data via this application (
http://www.barco.com/en/about-barco/legal/privacy-policy/clickshare-app).
1: In the event of any differences or inconsistencies between translations of the EULA and the English text of the EULA, the English
text will prevail.

5. Other Terms
•Open Source components
The Software contains software components released under an Open Source license.
A list of the third party components used is available in the Software’s README files, through the “My
Barco”section of the Barco website or through other (online) means. The applicable license terms,
copyright notices and, as relevant, source code access conditions apply as set out in the Barco EULA
attached hereto.
•Retention of data
Barco right to use and retain Functional Information (section 10.2 of the EULA) shall survive the term of
this EULA.
Barco ClickShare Product Specific Privacy policy
You are controller for personal data which are being processed via the Software. Therefore, you remain solely
responsible for complying with all applicable data protection laws and for implementing and maintaining
privacy protection and security measures (especially for components that you provide or control). Barco
disclaims any liability in this regard. Barco created a specific privacy policy for the ClickShare software
application for mobile devices, which describes the processing of personal data via this application (
http://www.barco.com/en/about-barco/legal/privacy-policy/clickshare-app).
Via the Software, Barco may gather technical information about (i) the functioning and the functionality of the
products which are connected through the Software, and/or (ii) as provided by you or generated by your use of
the Software (“Functional Information”). Barco may make use of such Functional Information for purposes of
analytics, for developing and improving products and services, offering products and services to your
organization and/or allowing third parties to access such Functional Information; based on the legitimate
interest of Barco of evaluating the market, assessing and improving its products and conducting research and
development. All knowhow, inventions and works derived by Barco from the Functional Information will be
exclusively owned by Barco.
Open Source Software provisions
This product contains software components released under an Open Source license. A copy of the source
code is available on request by contacting your Barco customer support representative.
EACH SEPARATE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELATED DOCUMENTATION
ARE PROVIDED "AS IS"WITHOUT EXPRESS OR IMPLIED WARRANTY INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL THE COPYRIGHTHOLDER OR ANY OTHER CONTRIBUTOR BE LIABLE FOR
DIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS OPEN SOURCE SOFTWARE. MORE INFORMATION/
DETAILS IS TO BE FOUND IN EACH SPECIFIC OPEN SOURCE LICENSE.
Copyright on each Open Source Software component belongs to the respective initial copyright holder, each
additional contributor and/or their respective assignee (s), as may be identified in the respective
documentation, source code, README file, or otherwise. You shall not remove or obscure or otherwise alter
the respective copyrights.
You acknowledge living up to the conditions of each separate Open Source Software license.
In the development of the Software, the following Open Source Software components have been used:
PACKAGE VERSION SOURCE_SITE
alsa-lib 1.1.7 ftp://ftp.alsa-project.org/pub/lib
alsa-plugins 1.1.1 ftp://ftp.alsa-project.org/pub/plugins
alsa-utils 1.1.7 ftp://ftp.alsa-project.org/pub/utils
arphic-uming-
fonts 20080216 http://archive.ubuntu.com/ubuntu/pool/main/t/ttf-arphic-uming
avahi 0.7 https://github.com/lathiat/avahi/releases/download/v0.7
bellagio 0.9.3 http://downloads.sourceforge.net/project/omxil/omxil/Bellagio%200.9.3

PACKAGE VERSION SOURCE_SITE
bitstream 1,4 https://get.videolan.org/bitstream/1.4
bluez5_utils 5.50 https://cdn.kernel.org/pub/linux/bluetooth
bluez5_utils-
headers 5.50 https://cdn.kernel.org/pub/linux/bluetooth
bridge-utils 1.6 https://cdn.kernel.org/pub/linux/utils/net/bridge-utils
busybox 1.29.3 http://www.busybox.net/downloads
bzip2 1.0.8 https://sourceware.org/pub/bzip2
c-ares 1.15.0 https://c-ares.haxx.se/download
ca-certificates 20190110
http://snapshot.debian.org/archive/debian/20190513T145054Z/pool/
main/c/ca-certificates
collectd 5.7.2 http://collectd.org/files
crda 4,14 https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/crda.git/snapshot
cryptsetup 2.0.6 https://cdn.kernel.org/pub/linux/utils/cryptsetup/v2.0
dbus 1.12.16 http://dbus.freedesktop.org/releases/dbus
dejavu-fonts 2.34 http://downloads.sourceforge.net/project/dejavu/dejavu/2.34
devmem2 1http://bootlin.com/pub/mirror
dhcp 4.3.6 http://ftp.isc.org/isc/dhcp/4.3.6
dnsmasq 2.79 http://thekelleys.org.uk/dnsmasq
dosfstools 4.1 https://github.com/dosfstools/dosfstools/releases/download/v4.1
dropbear 2018.76 http://matt.ucc.asn.au/dropbear/releases
dvblast 3.4 https://get.videolan.org/dvblast/3.4
e2fsprogs 1.44.5 https://cdn.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v1.44.5
efibootmgr 15 https://github.com/rhboot/efibootmgr/archive/15
efitools v1.7.0 git://git.kernel.org/pub/scm/linux/kernel/git/jejb/efitools.git
efivar 35 https://github.com/rhboot/efivar/archive/35
elfutils 0.176 https://sourceware.org/elfutils/ftp/0.176
eudev 3.2.7 http://dev.gentoo.org/~blueness/eudev
expat 2.2.7 http://downloads.sourceforge.net/project/expat/expat/2.2.7
faad2 2.8.8 http://downloads.sourceforge.net/project/faac/faad2-src/faad2-2.8.0
fbset 2.1 http://users.telenet.be/geertu/Linux/fbdev
fbv 1.0b http://s-tech.elsat.net.pl/fbv
ffmpeg 3.4.6 http://ffmpeg.org/releases
file 5.36 ftp://ftp.astron.com/pub/file
flashrom 1.0 http://download.flashrom.org/releases
flex 2.6.4 https://github.com/westes/flex/files/981163

PACKAGE VERSION SOURCE_SITE
fontconfig 2.13.1 http://fontconfig.org/release
freetype 2.9.1 http://download.savannah.gnu.org/releases/freetype
gdb 8.1.1 http://ftpmirror.gnu.org/gdb
giflib 5.1.4 http://downloads.sourceforge.net/project/giflib
gnu-efi 3.0.9 http://downloads.sourceforge.net/project/gnu-efi
gnupg2 2.2.17 https://gnupg.org/ftp/gcrypt/gnupg
grub 2.02-beta2 https://github.com/coreos/grub/releases
gst1-libav 1.14.4 http://gstreamer.freedesktop.org/src/gst-libav
gst1-plugins-
bad 1.14.4 https://gstreamer.freedesktop.org/src/gst-plugins-bad
gst1-plugins-
base 1.14.4 https://gstreamer.freedesktop.org/src/gst-plugins-base
gst1-plugins-
good 1.14.4 https://gstreamer.freedesktop.org/src/gst-plugins-good
gst1-vaapi 1.14.4 https://gstreamer.freedesktop.org/src/gstreamer-vaapi
gstreamer1 1.14.4 https://gstreamer.freedesktop.org/src/gstreamer
gzip 1.9 http://ftpmirror.gnu.org/gzip
hostapd
40e2dcfdf4-
e27191d4fb9e-
dc6c10337868-
b90acf
https://source.codeaurora.org/quic/la/platform/external/wpa_supplicant_
8
htop 2.2.0 http://hisham.hm/htop/releases/2.2.0
i2c-tools 4.1 https://www.kernel.org/pub/software/utils/i2c-tools
ibmswtpm 4769 http://ibmswtpm.sourceforge.net/
icu 60.2 http://download.icu-project.org/files/icu4c/60.2
iperf 2.0.13 http://downloads.sourceforge.net/project/iperf2
iproute2 4.19.0 https://cdn.kernel.org/pub/linux/utils/net/iproute2
iptables 1.8.2 http://ftp.netfilter.org/pub/iptables/files
iw 4.14 https://cdn.kernel.org/pub/software/network/iw
jansson 2.12 http://www.digip.org/jansson/releases
jose 10 https://github.com/latchset/jose/releases/download/v10
jpeg-turbo 2.0.1 http://downloads.sourceforge.net/project/libjpeg-turbo/2.0.1
json-c 0.13.1 https://s3.amazonaws.com/json-c_releases/releases
jsoncpp 1.8.4 https://github.com/open-source-parsers/jsoncpp/archive/1.8.4
kmod 25 https://cdn.kernel.org/pub/linux/utils/kernel/kmod
libaio 0.3.111 https://releases.pagure.org/libaio
libarchive 3.3.3 http://www.libarchive.org/downloads

PACKAGE VERSION SOURCE_SITE
libassuan 2.5.2 ftp://ftp.gnupg.org/gcrypt/libassuan
libbsd 0.10.0 https://libbsd.freedesktop.org/releases
libconfig v1.7.2 http://www.hyperrealm.com/libconfig/archive/v1.7.2
libcurl 7.65.3 https://curl.haxx.se/download
libdaemon 0.14 http://0pointer.de/lennart/projects/libdaemon
libdri2
4f1eef3183df2-
b270c3d5cbe-
f07343ee5127-
a6a4
https://github.com/robclark/libdri2/archive/
4f1eef3183df2b270c3d5cbef07343ee5127a6a4
libdrm 2.4.97 http://dri.freedesktop.org/libdrm
libedit 20180525-3.1 http://www.thrysoee.dk/editline
libepoxy 1.5.2 http://ftp.gnome.org/pub/gnome/sources/libepoxy/1.5
libestr 0.1.10 http://libestr.adiscon.com/files/download
libev 4.24 http://dist.schmorp.de/libev/Attic
libevdev 1.6.0 http://www.freedesktop.org/software/libevdev
libevent 2.1.8-stable
https://github.com/libevent/libevent/releases/download/release-2.1.8-
stable
libfastjson v0.99.8 https://github.com/rsyslog/libfastjson/archive/v0.99.8
libffi v3.3-rc0 https://github.com/libffi/libffi/archive/v3.3-rc0
libgcrypt 1.8.4 https://gnupg.org/ftp/gcrypt/libgcrypt
libglib2 2.56.4 http://ftp.gnome.org/pub/gnome/sources/glib/2.56
libgpg-error 1.33 ftp://ftp.gnupg.org/gcrypt/libgpg-error
libhttpparser v2.9.0 https://github.com/nodejs/http-parser/archive/v2.9.0
libical 1.0.1 https://github.com/libical/libical/releases/download/v1.0.1
libksba 1.3.5 ftp://ftp.gnupg.org/gcrypt/libksba
liblogging 1.0.6 http://download.rsyslog.com/liblogging
libnl 3.4.0 https://github.com/thom311/libnl/releases/download/libnl3_4_0
libnpth 1.6 https://www.gnupg.org/ftp/gcrypt/npth
libnspr 4.20 https://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v4.20/src
libnss 3.42.1
https://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_3_42_
1_RTM/src
libogg 1.3.3 http://downloads.xiph.org/releases/ogg
libopenssl 1.1.1c https://www.openssl.org/source
libopusenc 0.2.1 https://downloads.xiph.org/releases/opus
libpcap 1.9.0 http://www.tcpdump.org/release
libpciaccess 0.14 http://xorg.freedesktop.org/releases/individual/lib

PACKAGE VERSION SOURCE_SITE
libpng 1.6.37 http://downloads.sourceforge.net/project/libpng/libpng16/1.6.37
libpthread-
stubs 0,4 http://xcb.freedesktop.org/dist
libqrencode 4.0.0 http://fukuchi.org/works/qrencode
libresample 0.1.3 ftp://ftp.ubuntu.com/ubuntu/pool/universe/libr/libresample
libsamplerate 0.1.9 http://www.mega-nerd.com/SRC
libselinux 2.8
https://raw.githubusercontent.com/wiki/SELinuxProject/selinux/files/
releases/20180524
libsepol 2.8
https://raw.githubusercontent.com/wiki/SELinuxProject/selinux/files/
releases/20180524
libsha1 0.3 https://github.com/dottedmag/libsha1/archive/0.3
libsndfile 1.0.28 http://www.mega-nerd.com/libsndfile/files
libtool 2.4.6 http://ftpmirror.gnu.org/libtool
libusb 1.0.22 https://github.com/libusb/libusb/releases/download/v1.0.22
libusb-compat 0.1.5
http://downloads.sourceforge.net/project/libusb/libusb-compat-0.1/
libusb-compat-0.1.5
libuv v1.25.0 https://github.com/libuv/libuv/archive/v1.25.0
libv4l 1.16.3 http://linuxtv.org/downloads/v4l-utils
libva 2.4.0 https://github.com/intel/libva/releases/download/2.4.0
libvdpau 1.1.1 http://people.freedesktop.org/~aplattner/vdpau
libvorbis 1.3.6 http://downloads.xiph.org/releases/vorbis
libvpx v1.7.0 https://github.com/webmproject/libvpx/archive/v1.7.0
libxcb 1.13.1 http://xcb.freedesktop.org/dist
libxkbcommon 0.8.2 http://xkbcommon.org/download
libxml2 2.9.9 ftp://xmlsoft.org/sources
libyaml 0.2.1 http://pyyaml.org/download/libyaml
libzip 1.5.1 http://www.nih.at/libzip
libzlib 1.2.11 http://zlib.net/
lighttpd 1.4.53 http://download.lighttpd.net/lighttpd/releases-1.4.x
linux V4.9.181 https://mirrors.edge.kernel.org/pub/linux/kernel/v4.x/
linux-firmware unknown http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
linux-pam 1.3.1 https://github.com/linux-pam/linux-pam/releases/download/v1.3.1
llvm 7.0.1 http://llvm.org/releases/7.0.1
lm-sensors V3-5-0 https://github.com/lm-sensors/lm-sensors/archive/V3-5-0
logrotate 3.13.0 https://github.com/logrotate/logrotate/archive/3.13.0
lvm2 2.02.183 ftp://sources.redhat.com/pub/lvm2

PACKAGE VERSION SOURCE_SITE
memtester 4.3.0 http://pyropus.ca/software/memtester/old-versions
mesa3d 18.3.6 https://mesa.freedesktop.org/archive
microstack 0.0.69 www.meshcommander.com/upnptools
monit 5.25.3 http://mmonit.com/monit/dist
mtdev 1.1.4 http://bitmath.org/code/mtdev
ncurses 6.1 http://ftpmirror.gnu.org/ncurses
netcat 0.7.1 http://downloads.sourceforge.net/project/netcat/netcat/0.7.1
netsnmp 5,8 http://downloads.sourceforge.net/project/net-snmp/net-snmp/5.8
nodejs 8.15.1 http://nodejs.org/dist/v8.15.1
ntp 4.2.8p13 https://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2
opkg 0.3.6 http://downloads.yoctoproject.org/releases/opkg
opus 1.3.1 http://downloads.xiph.org/releases/opus
opusfile 0,11 http://downloads.xiph.org/releases/opus
opus-tools 0,2 http://downloads.xiph.org/releases/opus
parted 3.2 http://ftpmirror.gnu.org/parted
pciutils 3.5.5 https://cdn.kernel.org/pub/software/utils/pciutils
pcre2 10,32 https://ftp.pcre.org/pub/pcre
pcre 8.42 https://ftp.pcre.org/pub/pcre
php 7.3.9 http://www.php.net/distributions
pixman 0.34.0 http://xorg.freedesktop.org/releases/individual/lib
popt 1.16 http://rpm5.org/files/popt
portaudio v190600_
20161030 http://www.portaudio.com/archives
powertop 2.9 https://01.org/sites/default/files/downloads/powertop
protobuf v2.6.1 https://github.com/google/protobuf/archive/v2.6.1
python3 3.7.4 http://python.org/ftp/python/3.7.4
python-pyyaml 4.2b4
https://files.pythonhosted.org/packages/a8/c6/
a8d1555e795dbd0375c3c93b576ca13bbf139db51ea604a-
fa19a2c35fc03
python-serial 3.4
https://files.pythonhosted.org/packages/cc/74/
11b04703ec416717b247d789103277269d567db575d2fd88f25d9767f-
e3d
qca6174a
CNSS.LEA.
NRT_1.0 https://source.codeaurora.org/external/wlan/qcacld-2.0/
qca93777
CNSS.LEA.
NRT_1.0 https://source.codeaurora.org/external/wlan/qcacld-2.0/
qt5base 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules

PACKAGE VERSION SOURCE_SITE
qt5declarative 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5graphica-
leffects 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5imagefor-
mats 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5multimedia 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5quickcon-
trols 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5quickcon-
trols2 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5serialport 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5svg 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5webchan-
nel 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5webengine 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5websock-
ets 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5x11extras 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
qt5xmlpatterns 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules
ramspeed 2.6.0 http://www.alasir.com/software/ramspeed
readline 8.0 http://ftpmirror.gnu.org/readline
rsync 3.1.3 http://rsync.samba.org/ftp/rsync/src
rsyslog 8.22.0 http://rsyslog.com/files/download/rsyslog
sazanami-
fonts 20040629 http://sourceforge.jp/projects/efont/downloads/10087
sscep 0.6.1 https://github.com/certnanny/sscep
speex 1.2.0 https://downloads.xiph.org/releases/speex
splashutils 1.5.4.4 http://dev.gentoo.org/~spock/projects/gensplash/archive
sqlite 3280000 http://www.sqlite.org/2019
strace 4.26 https://strace.io/files/4.26
tar 1.29 http://ftpmirror.gnu.org/tar
tcpdump 4.9.2 http://www.tcpdump.org/release
tpm-tools 1.3.9.1 http://downloads.sourceforge.net/project/trousers/tpm-tools/1.3.9.1
trousers 0.3.14 http://downloads.sourceforge.net/project/trousers/trousers/0.3.14
tzdata 2018e http://www.iana.org/time-zones/repository/releases
unfonts 1.0 http://kldp.net/frs/download.php/1425
unzip 60 ftp://ftp.info-zip.org/pub/infozip/src
usbutils 010 https://cdn.kernel.org/pub/linux/utils/usb/usbutils

PACKAGE VERSION SOURCE_SITE
util-linux 2.33 https://cdn.kernel.org/pub/linux/utils/util-linux/v2.33
webp 1.0.1 http://downloads.webmproject.org/releases/webp
wireless_tools 30.pre9 https://hewlettpackard.github.io/wireless-tools
wireless-regdb 2019.06.03 https://cdn.kernel.org/pub/software/network/wireless-regdb
wpa_
supplicant
40e2dcfdf4-
e27191d4fb9e-
dc6c10337868-
b90acf
https://source.codeaurora.org/quic/la/platform/external/wpa_supplicant_
8
xapp_
beforelight 1.0.5 http://xorg.freedesktop.org/releases/individual/app
xapp_xauth 1.0.10 http://xorg.freedesktop.org/releases/individual/app
xapp_xclock 1.0.7 http://xorg.freedesktop.org/releases/individual/app
xapp_xinit 1.4.0 http://xorg.freedesktop.org/releases/individual/app
xapp_xinput 1.6.2 http://xorg.freedesktop.org/releases/individual/app
xapp_xinput-
calibrator 0.7.5 http://github.com/downloads/tias/xinput_calibrator
xapp_
xkbcomp 1.4.2 http://xorg.freedesktop.org/releases/individual/app
xapp_xrandr 1.5.0 http://xorg.freedesktop.org/releases/individual/app
xcb-proto 1.13 http://xcb.freedesktop.org/dist
xcb-util 0.4.0 http://xcb.freedesktop.org/dist
xcb-util-image 0.4.0 http://xcb.freedesktop.org/dist
xcb-util-
keysyms 0.4.0 http://xcb.freedesktop.org/dist
xcb-util-wm 0.4.1 http://xcb.freedesktop.org/dist
xdata_
xbitmaps 1.1.2 http://xorg.freedesktop.org/releases/individual/data
xdriver_xf86-
input-evdev 2.10.5 http://xorg.freedesktop.org/releases/individual/driver
xdriver_xf86-
video-amdgpu 18.1.0 http://xorg.freedesktop.org/releases/individual/driver
xfont_
encodings 1.0.4 http://xorg.freedesktop.org/releases/individual/font
xfont_font-
alias 1.0.3 http://xorg.freedesktop.org/releases/individual/font
xfont_font-
cursor-misc 1.0.3 http://xorg.freedesktop.org/releases/individual/font
xfont_font-
misc-misc 1.1.2 http://xorg.freedesktop.org/releases/individual/font
xfont_font-util 1.3.2 http://xorg.freedesktop.org/releases/individual/font

PACKAGE VERSION SOURCE_SITE
xkeyboard-
config 2.23.1 http://www.x.org/releases/individual/data/xkeyboard-config
xlib_libfontenc 1.1.3 http://xorg.freedesktop.org/releases/individual/lib
xlib_libICE 1.0.10 http://xorg.freedesktop.org/releases/individual/lib
xlib_libSM 1.2.3 http://xorg.freedesktop.org/releases/individual/lib
xlib_libX11 1.6.7 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXau 1.0.8 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXaw 1.0.13 http://xorg.freedesktop.org/releases/individual/lib
xlib_
libXcomposite 0.4.4 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXcursor 1.1.15 http://xorg.freedesktop.org/releases/individual/lib
xlib_
libXdamage 1.1.4 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXdmcp 1.1.3 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXext 1.3.3 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXfixes 5.0.3 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXfont2 2.0.3 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXft 2.3.2 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXi 1.7.9 http://xorg.freedesktop.org/releases/individual/lib
xlib_
libXinerama 1.1.4 http://xorg.freedesktop.org/releases/individual/lib
xlib_libxkbfile 1.0.9 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXmu 1.1.2 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXpm 3.5.12 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXrandr 1.5.1 http://xorg.freedesktop.org/releases/individual/lib
xlib_
libXrender 0.9.10 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXres 1.2.0 http://xorg.freedesktop.org/releases/individual/lib
xlib_
libXScrnSaver 1.2.3 http://xorg.freedesktop.org/releases/individual/lib
xlib_
libxshmfence 1.3 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXt 1.1.5 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXtst 1.2.3 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXv 1.0.11 http://xorg.freedesktop.org/releases/individual/lib
xlib_
libXxf86vm 1.1.4 http://xorg.freedesktop.org/releases/individual/lib
xlib_xtrans 1.3.5 http://xorg.freedesktop.org/releases/individual/lib

PACKAGE VERSION SOURCE_SITE
xorgproto 2018.4 http://xorg.freedesktop.org/releases/individual/proto
xserver_xorg-
server 1.20.5 https://xorg.freedesktop.org/archive/individual/xserver
xterm 327 http://invisible-mirror.net/archives/xterm
xutil_util-
macros 1.19.2 http://xorg.freedesktop.org/releases/individual/util
zip 30 ftp://ftp.info-zip.org/pub/infozip/src
zlib 1.2.11 http://www.zlib.net
angular 7.2.0 https://github.com/angular/angular.git
bcrypt 3.0.6 https://github.com/kelektiv/node.bcrypt.js
bcryptjs 2.4.3 https://github.com/dcodeIO/bcrypt.js
body-parser 1.18.3 https://github.com/expressjs/body-parser
bootstrap 4.3.1 https://getbootstrap.com/
bunyan 1.8.12 https://github.com/trentm/node-bunyan
bunyan-
prettystream 0.1.3 https://github.com/trentm/node-bunyan
bunyan-syslog 0.3.2 https://github.com/trentm/node-bunyan
chromedriver 77.0.0 https://github.com/giggio/node-chromedriver
Core-js 2.5.4 https://github.com/zloirock/core-js
cors 2.8.5 https://github.com/expressjs/cors
dbus-native 0.4.0 https://github.com/sidorares/dbus-native
express 4.16.4 https://github.com/expressjs/express
generate-
password 1.4.2 https://github.com/brendanashworth/generate-password
inversify 5.0.1 http://inversify.io/
jquery 3.4.1 https://jquery.com/
js-yaml 3.12.0 https://github.com/nodeca/js-yaml
moment 2.24.0 http://momentjs.com/
morgan 1.9.1 https://github.com/expressjs/morgan
multer 1.4.1 https://github.com/expressjs/multer
ngx-cookie-
service 2.2.0 https://github.com/7leads/ngx-cookie-service
npm 6.10.2 https://docs.npmjs.com/
passport 0.4.0 http://github.com/jaredhanson/passport
passport-http 0.3.0 http://github.com/jaredhanson/passport-http
popper.js 1.15.0 https://popper.js.org/

PACKAGE VERSION SOURCE_SITE
reflect-
metadata 0.1.13 http://rbuckton.github.io/reflect-metadata
rxjs 6.3.3 https://github.com/ReactiveX/RxJS
swagger-
parser 6.0.5 https://github.com/APIDevTools/swagger-parser
swagger-ui-
express 4.0.1 https://github.com/scottie1984/swagger-ui-express
tslib 1.9.0 http://typescriptlang.org/
ws 7.1.1 https://github.com/websockets/ws
zone.js 0.8.26 https://github.com/angular/angular
azure-iot-c-
sdk 0.3.0 https://github.com/Azure/azure-iot-sdk-c/
NXP SDK 2.5.0
https://www.nxp.com/support/developer-resources/software-
development-tools/mcuxpresso-software-and-tools/mcuxpresso-
software-development-kit-sdk:MCUXpresso-SDK?tab=Design_Tools_
Tab
unlz4 -https://github.com/lz4/lz4/blob/dev/lib/lz4.h
ring-buff -https://code.google.com/archive/p/ring-buff/
wpa_
supplicant 2.6 http://w1.fi/wpa_supplicant/
EN55032-CISPR32 Class B ITE (Information Technology Equipment)
This is a class B product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
If this equipment does cause interference to radio or television reception, the user may try to correct the
interference by one or more of the following measures :
•Re-orientation of the receiving antenna for the radio or television.
•Relocate the equipment with respect to the receiver.
•Plug the equipment into a different outlet so that the equipment and receiver are on different branch
circuits.
•Fasten cables connectors to the equipment by mounting screws.
Federal Communication Commission Interference Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by the FCC: "How to Identify and Resolve Radio-TV
Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington D.C.
20402.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can
void your authority to operate this equipment under Federal Communications Commissions rules.
In order to maintain compliance with FCC regulations shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to result in interference to radio &
television reception.
FCC RF Radiation Exposure Statement: This device is capable of operating in 802.11a mode. For 802.11a
devices operating in the frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to
reduce any potential harmful interference for Mobile Satellite Services (MSS) in the US. WIFI Access Points
that are capable of allowing your device to operate in 802.11a mode (5 .15 - 5.25 GHz band) are optimized for
indoor use only. If your WIFI network is capable of operating in this mode, please restrict your WIFI use
indoors to not violate federal regulations to protect Mobile Satellite Services.
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator
and your body.
Base Unit FCC ID: 2AAED-R9861521
Button FCC ID (model R9861600D01C): 2AAED-R9861600D01
ClickShare Button 2AAED-R9861600D01 has been tested and meets the FCC RF exposure guidelines.The
maximum SAR value reported is 1.19 W/kg.
ClickShare button 2AAED-R9861600D01 should be installed and operated with a minimum distance of 5 mm
between the radiator and your body.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency
exposure limits. The Barco Wireless Device should be used in such a manner such that the potential for
human contact during normal operation is minimized.
Caution: Exposure to Radio Frequency Radiation.
1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not
be co-located or operating in conjunction with any other antenna or transmitter.
2. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm
must be maintained between the antenna of this device and all persons.
Base Unit IC: IC: 21559-R9861521
Button IC (model R9861600D01C): 21559-R9861600D01
IC Antenna statement
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter 21559-R9861521 has been approved by Industry Canada to operate with the antenna
types listed below with the maximum permissible gain and required antenna impedance for each antenna type
indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for
that type, are strictly prohibited for use with this device.

Indoor use only warning
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems.
Certification information (SAR)
This device is also designed to meet the requirements for exposure to radio waves established by the Industry
Canada.
The SAR limit adopted by Canada is 1.6 W/kg averaged over one gram of tissue. The highest SAR value
reported to the IC for this device type complies with this limit.
The highest SAR value reported to the IC for this device type when using in portable exposure conditions is
1.15 W/kg.
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l'appareil de sans fil Barco est inférieure à la limite d'exposition aux
fréquences radio d'Industry Canada (IC). Utilisez l'appareil de sans fil Barco de façon à minimiser les contacts
humains lors du fonctionnement normal.
Avertissement: L'exposition aux rayonnements fréquences radio
1. Pour se conformer aux exigences de conformité RF canadienne l'exposition, cet appareil et son antenne
ne doivent pas être co-localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur.
2. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au
moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes.
IC Unité de Base: 21559-R9861521
IC Button (model R9861600D01C): 21559-R9861600D01
Déclaration d'antenne d'Industrie Canada (IC)
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type
d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p. i. r. e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Le présent émetteur radio 21559-R9861521 a été approuvé par Industrie Canada pour fonctionner avec les
types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour
chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain
maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Utilisation à l'intérieur seulement
La bande 5 150-5 250 MHz est réservés uniquement pour une utilisation à l'intérieur afin de réduire les
risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Informations de certification (DAS)
Cet appareil est également conçu pour satisfaire aux exigences concernant l’exposition aux ondes
radioélectriques établies par Industrie Canada.
Le seuil du DAS adopté par le Canada est de 1.6 W/kg pour 1g de tissu. La plus grande valeur de DAS
signalée à IC pour ce type d’appareil ne dépasse pas ce seuil.
La valeur maximale de DAS signalée à IC pour ce type d’appareil lors du test dans des conditions d’exposition
portative est de 1.15 W/kg.

1 Introduction to the Installation Guide..................................................................................................................................21
1.1 Documentation .................................................................................................................................................................................22
1.2 Symbols and fonts..........................................................................................................................................................................22
2 CX-50 Specifications..........................................................................................................................................................................23
2.1 About the CX-50 .............................................................................................................................................................................24
2.2 CX-50 specifications .....................................................................................................................................................................25
2.3 About the Base Unit.......................................................................................................................................................................26
3 Getting started..........................................................................................................................................................................................29
3.1 Environmental Condition Check.............................................................................................................................................30
3.2 Basic Workflow.................................................................................................................................................................................30
4 CX-50 Installation..................................................................................................................................................................................31
4.1 Installation methods for the Base unit .................................................................................................................................32
4.2 Table mounting.................................................................................................................................................................................32
4.3 Wall mounting ...................................................................................................................................................................................32
4.4 Out-of-the-box use of the Base Unit.....................................................................................................................................33
4.5 Out-of-the-box use of the Base Unit with Ethernet link..............................................................................................34
4.6 Video signal connections to the Base unit ........................................................................................................................35
4.7 Touch screen connections to the Base unit......................................................................................................................36
4.8 Camera connection........................................................................................................................................................................36
4.9 Content Audio connection..........................................................................................................................................................36
4.10 Echo Canceling Speakerphone audio connection .......................................................................................................37
4.11 LAN connection................................................................................................................................................................................38
4.12 Power connection ...........................................................................................................................................................................38
4.13 First setup of the Base Unit ....................................................................................................................................................... 40
4.14 Registration to XMS Cloud ........................................................................................................................................................41
4.15 Use without registration of the device .................................................................................................................................43
4.16 Basic configuration of the ClickShare device..................................................................................................................46
5 Preparing the Buttons .......................................................................................................................................................................49
5.1 Pairing ...................................................................................................................................................................................................50
5.2 ClickShare Extension Pack.......................................................................................................................................................51
5.3 ClickShare Extension Pack installer.....................................................................................................................................51
5.4 ClickShare Windows Certified driver ...................................................................................................................................52
5.5 ClickShare Desktop app .............................................................................................................................................................52
R5900096 /00 CX-50 19
Table of contents

R5900096 /00 CX-5020
6 CX-50 Configurator..............................................................................................................................................................................55
6.1 Accessing the Configurator.......................................................................................................................................................57
6.2 ClickShare Configuration Wizard...........................................................................................................................................60
6.3 On-Screen ID information ..........................................................................................................................................................63
6.4 Personalisation, Wallpaper........................................................................................................................................................64
6.5 Personalisation, Personalized wallpaper ..........................................................................................................................66
6.6 Manage configuration files.........................................................................................................................................................67
6.7 Display setup, Outputs.................................................................................................................................................................68
6.8 Display setup, Output ...................................................................................................................................................................69
6.9 Display setup, Inputs.....................................................................................................................................................................70
6.10 Audio settings....................................................................................................................................................................................71
6.11 WiFi settings ......................................................................................................................................................................................71
6.12 LAN settings.......................................................................................................................................................................................75
6.13 Services, Mobile devices............................................................................................................................................................77
6.14 XMS Cloud Integration.................................................................................................................................................................78
6.15 Services, SNMP...............................................................................................................................................................................79
6.16 Security, security level..................................................................................................................................................................80
6.17 Security, passwords.......................................................................................................................................................................81
6.18 Status information Base Unit....................................................................................................................................................82
6.19 Date & Time setup, manually ...................................................................................................................................................83
6.20 Date & Time setup, time server...............................................................................................................................................84
6.21 Energy savers...................................................................................................................................................................................85
6.22 Buttons..................................................................................................................................................................................................86
6.23 Firmware Update.............................................................................................................................................................................87
6.24 Support & Updates, Troubleshoot, log settings .............................................................................................................88
6.25 Factory defaults ...............................................................................................................................................................................89
7 Firmware updates .................................................................................................................................................................................91
7.1 Updating the CX-50 firmware...................................................................................................................................................92
8 Troubleshooting ......................................................................................................................................................................................93
8.1 Troubleshooting list........................................................................................................................................................................94