Barco AMM240ED User manual

ENABLING BRIGHT OUTCOMES
User Guide
AMM240ED

Registered office: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
Barco, Inc.
3059 Premiere Parkway, Suite 400, Duluth, GA 30097, USA
www.barco.com/en/support
www.barco.com

3R5912858 /05 AMM240ED
1 Welcome!.......................................................................................................................................................................................................... 5
1.1 Conventions..........................................................................................................................................................................................6
1.2 What's in the box................................................................................................................................................................................6
1.3 Product overview................................................................................................................................................................................7
2 Installation ....................................................................................................................................................................................................... 9
2.1 Workspace..........................................................................................................................................................................................10
2.2 Unpacking ........................................................................................................................................................................................... 10
2.3 Cable connections..........................................................................................................................................................................10
3 Daily operation ......................................................................................................................................................................................... 11
3.1 Recommendations for daily operation ................................................................................................................................12
3.2 Bringing up the OSD menus ..................................................................................................................................................... 12
3.3 Navigating through the OSD menus ....................................................................................................................................12
4 Advanced operation............................................................................................................................................................................15
4.1 Chromatic............................................................................................................................................................................................16
4.2 Visual .....................................................................................................................................................................................................16
4.3 Setting ...................................................................................................................................................................................................16
4.4 Advanced.............................................................................................................................................................................................17
4.5 Information..........................................................................................................................................................................................20
5 Cleaning your display........................................................................................................................................................................21
5.1 Cleaning instructions.....................................................................................................................................................................22
6 Troubleshooting ......................................................................................................................................................................................23
6.1 Troubleshooting list........................................................................................................................................................................24
7 Important information.........................................................................................................................................................................25
7.1 Safety information...........................................................................................................................................................................26
7.2 Cybersecurity ....................................................................................................................................................................................28
7.3 Environmental information.........................................................................................................................................................28
7.4 EU Declaration of Conformity for Medical Applications.............................................................................................30
7.5 Regulatory compliance information......................................................................................................................................30
7.6 EMC notice ......................................................................................................................................................................................... 31
7.7 Explanation of symbols................................................................................................................................................................33
7.8 Warranty...............................................................................................................................................................................................36
Table of contents

R5912858 /05 AMM240ED4
7.9 Legal disclaimer...............................................................................................................................................................................37
7.10 Technical specifications...............................................................................................................................................................38
7.11 Connectors .........................................................................................................................................................................................40

5R5912858 /05 AMM240ED
Introduction
Thank you for choosing this AMM240ED!
For future reference, record the serial number of your display below. The serial number is located on the back
of the display.
Serial number
Welcome! 1

R5912858 /05 AMM240ED6
1.1 Conventions
Warnings, Cautions and Notes
Read this manual and carefully follow the instructions. The words warning, caution, and note carry special
meanings and should be carefully reviewed:
•Warning!
To avoid potential serious injury to the user or the patient and/or serious damage to this device.
•Caution!
To avoid potential injury to the user or the patient and/or damage to this device.
•Note
To inform the user of important installation, operating, or maintenance instructions.
1.2 What's in the box
Overview
Make sure the following items are present when you unpack the box:
•AMM240ED LCD display (the equipment that displays information, graphic data, image and video on the
LED screen)
•English user guide
•Multilingual documentation disc
•BNCx4 to HD15 cable 1
•DVI-I cable
•BNC cable
•Y/C cable
•AC power cord 2
•AC-Adaptor (part number: BM060S24F (Bridgepower))
•Cable cover
•4 VESA screws
Your system provider may offer alternative cords or cables depending on the installation
requirement and local geography issues.
Keep your original packaging. It is designed for this display and is the ideal protection during
transport and storage.
Welcome!
1. May be removed on pending models
2. Might vary pending on region standard

7R5912858 /05 AMM240ED
1.3 Product overview
Front and Back
Image 1–1
Image 1–2
•Power switch: Turns the system ON or OFF.
•Menu: Enter or exit the OSD menu.
•Left: Decrease a setting or value.
•Right: Increase a setting or value, or enter a submenu.
•Up: Move to the previous item.
•Down: Move to the next item.
•Select: Select an item.
•Brightness: Quick key for brightness adjustment.
•Contrast: Quick key for contrast adjustment.
•Scale mode: Quick key for scale mode adjustment.
Welcome!

R5912858 /05 AMM240ED8
•Input: Activate the video source selection menu.
Connections
1 2 3 4 5 6 7 8 9 10
Image 1–3
1. DC power
2. HD/SD SDI1 IN
3. HD/SD SDI1 OUT
4. HD15/RGBS IN
5. RS232C
6. USB
7. DVI-I OUT
8. DVI-I IN
9. HD/SD SDI2 IN (OPTIONAL) 3
10.Y/C IN
AC-Adaptor dimensions
Image 1–4
Welcome!
3. A metal cover is attached to the HD/SD SDI2 connector depending on the model.

9R5912858 /05 AMM240ED
To make your installation easier, the monitor is able to Plug and Play with your system if your
system also supports the DDC (Display Data Channel) protocol. The DDC protocol is a
communication protocol through which the monitor automatically informs the host system about its
capabilities, for example, supported resolutions and corresponding timing. The monitor supports the
DDC1 and DDC2B standard.
Installation 2

R5912858 /05 AMM240ED10
2.1 Workspace
To prepare a suitable workspace
Before you carefully unpack your monitor, prepare a suitable workspace.
You need:
•a stable and level surface
•a grounded power outlet
•an area which is relatively free of glare from sunlight or other sources of bright light
The monitor is cooled by natural convection (it has no fan). For optimum performance, do not block the cooling
vents.
2.2 Unpacking
To unpack the monitor
•Inspect the monitor and other package contents for shipping damage that could cause a fire or shock
hazard.
•Immediately report any shipping damage to the carrier or transportation company and contact customer
service in case of return.
2.3 Cable connections
To connect the cables
1. Connect a supplied video cable (DVI-I, Y/C, BNC, BNCx4 to HD15) to the host system accordingly.
2. Connect the DC power to the DC power connector on the monitor.
3. Make sure that the AC power cord is the correct type required for the area. 4
4. Connect one end of the AC power cord to the AC-Adaptor.
5. Connect the other end of the AC power cord to a grounded power outlet.
6. Turn the host system on.
7. Turn the monitor on. 5
You can use a Bridgepower extension power cord (optional). The part numbers are: C-
47D2001P50MF (5 ft), C-47D2004P57MF (15 ft) and Z3404272 (75 ft).
To avoid damage to the unit or equipment, only connect the equipment to the HD/SD SDI optional
module.
Installation
4. For 120 V applications, use only the UL Listed detachable power cord with NEMA configuration 5-15P type (parallel blades) plug
cap. For 240 V applications use only the UL Listed detachable power cord with NEMA configuration 6-15P type (tandem blades) plug
cap.
5. If the monitor does not function properly, refer to the troubleshooting section to diagnose the problem.

11R5912858 /05 AMM240ED
Daily operation 3

R5912858 /05 AMM240ED12
3.1 Recommendations for daily operation
To avoid image retention
Permanent burn-in may occur from the following:
•Displaying color bar or static images repeatedly or for a long period of time.
•Using the unit repeatedly in a high temperature/ high humidity environment.
•Continuously displaying an image smaller than the monitor.
To reduce the risk of burn-in, it is recommended to turn off the power of the unit, and reduce the brightness
when the unit is not in use.
3.2 Bringing up the OSD menus
How to bring up the OSD menus
Bringing up the OSD menus can be done by:
1. If not already done so, switch on the display.
2. Press the menu button.
As a result, the OSD main menu comes up.
Image 3–1
3.3 Navigating through the OSD menus
How to navigate through the OSD menus
Navigating through the OSD menus can be done by:
•Press the Up or Down button to select icons. The icon will be highlighted when selected.
•Press the right arrow button to go into another menu.
•Press the enter button to select a submenu and the right arrow or left arrow button to select the function.
•In order to exit the OSD menu (regardless of where you are), choose the “Exit”icon and press the menu
button.
•Press the input button to enter the input menu. Push the Up or Down arrow to highlight the correct input
and press enter to select the input.
Daily operation

13R5912858 /05 AMM240ED
Overview main menu icons
Chromatic:
Adjust Color Temp, Gamma
Visual:
Adjust Brightness, Contrast, Phase, Chroma, Sharpness-V, Sharpness-H
Setting:
Adjust Scale Mode, Color Space, Freeze Frame, Zoom / Pan, PIP, POP, PBP
Advanced:
Adjust OSD Position Control, Screen Control, DPMS, Auto Source Select, Smart
Select, Restore Factory, Key Lock, Overscan
Information:
User Customer Entry, Serial Number, Runtime, Input Format, Exit
Daily operation

R5912858 /05 AMM240ED14
Daily operation

15R5912858 /05 AMM240ED
Advanced operation 4

R5912858 /05 AMM240ED16
4.1 Chromatic
About chromatic
The available functions are:
•Color Temp: Change the Color Temperature - D65, D93, SYS-1, SYS-2
•Red: Range 0 —100
•Green: Range 0 —100
•Blue: Range 0 —100
•Gamma: Change the Gamma Value - 1.8, 1.9, 1.95, 2.1, 2.1S, 2.2, 2.3, 2.4, 2.4S, S0, Radiograph
4.2 Visual
About visual
The available functions are:
•Brightness: Adjust the Brightness of Panel (Range 0 - 100)
•Contrast: Adjust the Contrast of Video (Range 0 - 100)
•Phase: Adjust the Phase of Video (Range 0 - 100)
•Chroma: Adjust the Chroma of Video (Range 0 - 100)
•Sharpness-V: Set the Sharpness of Vertical Image (Range 0 - 20) 6
•Sharpness-H: Set the Sharpness of Horizontal Image (Range 0 - 20)6
4.3 Setting
About setting
The available functions are:
•Scale Mode: Change the Scale Mode - Fill all, One to One, Vertical - Fill, Horizontal - Fill, Fill aspect ratio
•Color Space: Change Color Space between RGB and YUV
•Freeze Frame: Off / On
•Zoom / Pan: Activate zoom/pan OSD
•PIP: Activate PIP Menu
•POP: Activate POP Menu
•PBP: Activate PBP Menu
PIP / POP / PBP function
The following combinations are available:
Main / PIP DVI-I SDI1 SDI2
(Optional)7
Component
/ RGBs HD-15 Y/C
DVI-I x o x o o o
SDI1 o x o o o x
SDI2
(Optional)*
x o x o o o
Component
/ RGBs
o o o x x o
HD-15 o o o x x o
Y/C o x x o o x
Advanced operation
6. Available for Y/C and HD/SD SDI1 only
7. When a HD/SD SDI module (optional) is connected, the HD/SD SDI2 is applicated to the PIP/POP/PBP function.

17R5912858 /05 AMM240ED
The picture may be disturbed when the frame frequency of the main screen is different from that of
the subscreen, or when the main screen and the subscreen input interlace signals.
PIP Menu
The available settings are:
•Mode: PIP Mode On / Off
•Source: PIP Sub Screen Source - DVI-I, HD/SD SDI1, HD/SD SDI28Component/RGBs, HD15, Y/C
•Position: PIP Sub Screen Position - Top L, Top R, Bottom L, Bottom R
•Size: PIP Sub Screen Size - Small, Medium, Large
•Blending: PIP Sub Screen Blending (Range 0 - 20)
•Swap: PIP Sub Screen Swap
POP Menu
The available settings are:
•Mode: POP Mode On / Off
•Source: POP Sub Screen Source - DVI-I, HD/SD SDI1, HD/SD SDI29Component/RGBs, HD15, Y/C
•Position: POP Sub Screen Position - Top L, Top R, Bottom L, Bottom R
•Size: POP Sub Screen Size - Small, Medium, Large
•Blending: POP Sub Screen Blending (Range 0 - 20)
•Swap: POP Sub Screen Swap
PBP Menu
The available settings are:
•Mode: PBP Mode On / Off
•Source: PBP Sub Screen Source - DVI-I, HD/SD SDI1, HD/SD SDI210 Component/RGBs, HD15, Y/C
•Swap: PBP Sub Screen Swap
4.4 Advanced
About advanced
The available functions are:
•OSD Position Control: Change the OSD Menu - H and V Position, Background, OSD Time Out,
Language
•Screen Control: Control and Adjust H and V position, Freqency, Phase, Noise Reduction, Motion Offset
•DPMS: Change the DPMS - Off, 60 min, 90 min, 120 min, Normal
•Auto Source Select: Adjust Auto Source Select Between On and Off
•Smart Select: Enable / Disable Smart Select Sub Menu - Model A, Model B Model C, Model D
•Restore Factory: Changes All OSD Value to Factory Outgoing Status
•Key Lock: Set to Key Lock Mode
•Overscan: Adjust Overscan Ratio - Off, Step 1, Step 2, Step 3, Step 4, Step 5, Step 6, Step 7
OSD Position Control Menu
The available settings are:
•H Position: Adjust OSD H Position (Range 0 - 100)
•V Position: Adjust OSD V Position (Range 0 - 100)
•Background: Adjust Transparency of OSD Background (Range 0 - 20)
•OSD Time Out: Adjust OSD Time Out - 5 sec, 10 sec, 15 sec, 20 sec, 1 min, 2 min
•Language: OSD Language - English, Japanese, Chinese, Korean, French, German
Advanced operation
8. When a HD/SD SDI optional module is connected, HD/SD SDI2 is applicable to the source for PIP mode.
9. When a HD/SD SDI optional module is connected, HD/SD SDI2 is applicable to the source for POP mode.
10. When a HD/SD SDI optional module is connected, HD/SD SDI2 is applicable to the source for PBP mode.

R5912858 /05 AMM240ED18
Screen Control Menu
The available settings are:
•H Position: Adjust Screen H Position (Range 0 - 100) 11
•V Position: Adjust Screen V Position (Range 0 - 100)11
•Frequency: Adjust Frequency (Range 0 - 100) 12
•Phase: Adjust Phase (Range 0 - 100)12
•Noise Reduction: Adjust Noise Reduction (Range 0 - 31)
•Motion Offset: Adjust Motion Offset (Range 0 - 100)
Power Management Function
The monitor is equipped with a power management function, which automatically reduces the power
consumption when not in use in three power level modes.
•Standby Mode: The monitor goes into standby mode when the horizontal sync signal is off for about 10
seconds. In this mode, the screen goes off and the power LED blinks for 1 second On and 1 second Off.
The screen is displayed after the horizontal sync signal is restored.
•Suspend Mode: The monitor goes into suspend mode when the vertical sync signal is off for about 10
seconds. The power consumption during this is 10 W. In this mode, the screen goes off and the power LED
blinks for 1 second On and 1 second Off. The screen is displayed after the vertical sync signal is restored.
•Off Mode: The monitor goes into power-off mode when the vertical and horizontal sync signals are off for
about 10 seconds. In this mode, the screen goes off and the power LED blinks for 1 second On and 1
second Off. The screen is displayed after the vertical and horizontal sync signals are restored.
The AMM240ED power management system provides 4 phases of power saving modes by detecting the
horizontal sync signal as shown in the table below.
State Normal Operation DPMS Standby DPMS Suspend DPMS Off
Horizontal Sync Active Inactive Active Inactive
Vertical Sync Active Active Inactive Inactive
Video Active Blanked Blanked Blanked
Power Indicator Green Green flashing (1
sec. interval)
Green flashing (1
sec. interval)
Green flashing (1
sec. interval)
Power
Consumption
40 W 15 W 15 W 15 W
When the monitor is in power saving mode or detects an incorrect timing, the screen will be blank and the
power LED indicator will blink.
Preset Modes
Input Signal Timing
Resolution Horizontal frequency
(KHz) Vertical frequency (Hz) Pixel clock (MHz)
640 x 350 @70Hz 31.469 70.087 25.175
640 x 480 @60Hz 31.469 59.940 25.175
640 x 480 @75Hz 37.500 75.000 31.500
800 x 600 @56Hz 35.156 56.250 36.000
800 x 600 @60Hz 37.879 60.317 40.000
800 x 600 @75Hz 46.875 75.000 49.500
Advanced operation
11. Available for HD15, HD/SD SDI1 Component/RGBs
12. Available for HD15

19R5912858 /05 AMM240ED
Resolution Horizontal frequency
(KHz) Vertical frequency (Hz) Pixel clock (MHz)
1024 x 768 @60Hz 48.363 60.004 65.000
1024 x 768 @70Hz 56.476 70.069 75.000
1024 x 768 @75Hz 60.023 75.029 78.750
1152 x 864 @60Hz 54.348 60.053 80.000
1152 x 864 @70Hz 63.955 70.016 94.200
1152 x 864 @75Hz 67.500 75.000 108.000
1280 x 1024 @60Hz 63.981 60.02 108.000
1680 x 1050 @60Hz 64.742 59.946 119.125
1680 x 1050 @60Hz 65.160 59.944 147.000
1600 x 1200 @60Hz 74.077 59.981 130.375
1920 x 1080@60Hz 67.500 60.00 148.500
1920 x 1200@60Hz 74.099 59.999 154.125
Video Signals
Format DVI-I HD-15 Y/C SDI1 SDI2
(optional)7
Component/RGBs
Y/Pb/Pr/
RGB+SOG RGB+ CS
NTSC-M
NTSC-443
o
PAL-
BDGHI
PAL-M
PAL-N
PAL-60
o
480/59.94i o o o o
480/59.94p o o
576/50i o o o o
576/50p o o o o
720/50p o o o o o o
720/59.94p o o o o o o
720/60p o o o o o o
1080/
23.98p
o o o o o
1080/24p o o o o o
1080/25p o o o o o o
1080/
29.97p
o o o o o o
Advanced operation

R5912858 /05 AMM240ED20
Format DVI-I HD-15 Y/C SDI1 SDI2
(optional)7
Component/RGBs
Y/Pb/Pr/
RGB+SOG RGB+ CS
1080/30p o o o o o o
1080/50i o o o o o
1080/
59.94i
o o o o o
1080/60i o o o o o
1080/50p o o
1080/60P o o
4.5 Information
About information
The available functions are:
•Custom Entry: Change the User or Monitor’s Name / Custom Entry Row 1, Custom Entry Row 2
•SN: Display the Serial Number
•Runtime: Display the Total Runtime
•Input Format: Display the Current input Resolution and Vertical Frequency
Advanced operation