Barco Coronis 5MP Mammo Instruction Manual

Installation & User Manual
Coronis 5MP

2 Coronis 5MP
(This page intentionally left blank.)

3
Copyright notice................................................................................... 7
Preface ................................................................................................. 8
Safety Instructions............................................................................. 12
Recommendations for using your display system........................... 15
Display Controller Installation .................................................. 17
Which display controller? .................................................................. 19
Installing a Barco display controller ................................................. 19
Overview..................................................................................... 19
Installation Procedure ....................................................................... 22
Display Installation................................................................... 29
Overview............................................................................................ 31
Introduction ................................................................................ 31
Package contents ....................................................................... 32
Controls and connectors............................................................. 33
Installation ......................................................................................... 35
Precautions ................................................................................. 35
Before installing the display...................................................... 35
Portrait or landscape position.................................................... 36
Connecting the cables................................................................ 37
Routing the signal cables .......................................................... 38
Using the USB hub...................................................................... 39
Tilt and swivel positioning......................................................... 40
Starting up .................................................................................. 40
How to avoid image retention ......................................................... 41
Software Installation ................................................................ 43
Driver and software installation prerequisites................................. 45
Installing the BARCO MXRT drivers and software.............................. 46
Automated display configuration .............................................. 48
Reinstalling drivers..................................................................... 48

4
Uninstalling the drivers and software....................................... 49
Command line (Silent) Install of Drivers and Software............ 50
Installing the BARCOMED CORONIS or Nio drivers and software ......... 52
Automated display configuration .............................................. 54
Reinstalling drivers..................................................................... 54
Uninstalling the drivers and software....................................... 54
Command line (Silent) Install of Drivers and Software............ 55
Display Controller Tools ............................................................ 57
Languages supported........................................................................ 59
Barco Driver Properties ..................................................................... 59
Accessing the Barco tab............................................................. 59
Using the Barco tab.................................................................... 60
Advanced properties for MXRT controller......................................... 62
Barco Adapter Configuration...................................................... 62
OpenGL and Direct3D................................................................. 63
Rotation ...................................................................................... 65
(Device) Details.......................................................................... 65
OpenGL Profiles .......................................................................... 65
Advanced Properties for BarcoMed Coronis or BarcoMed Nio ........ 67
Palette modes ............................................................................ 67
Drawing Modes .......................................................................... 69
Monitor Configuration ................................................................ 70
Graphics Board ........................................................................... 71
Device Details............................................................................. 71
Display Operation ..................................................................... 73
Operation ........................................................................................... 75
Switching to stand-by position.................................................. 75
Controlling the display............................................................... 75
Setting the Luminance value..................................................... 77

5
Settings....................................................................................... 77
Getting information.................................................................... 78
Advanced functions........................................................................... 80
About this chapter...................................................................... 80
Advanced functions in the Luminance menu ........................... 81
Advanced functions in the Settings menu................................ 82
Advanced functions in the Information menu.......................... 82
Advanced functions in the Adjustments menu ........................ 85
Maintenance...................................................................................... 86
Troubleshooting................................................................................. 88
Windows does not show the desired display settings............. 88
Pixel Faults.................................................................................. 89
Technical specifications..................................................................... 90
MediCal Software
Installation and Operation................................................... 93
MediCal Pro installation and operation............................................ 95
MediCal Pro software installation ............................................. 95
Using MediCal Pro ...................................................................... 95
Troubleshooting........................................................................ 97
Setting the resolution of your CORONIS 5MP display......................... 99
Accessing the Windows Display Control Panel ......................... 99
Setting the Color and Palette Modes.............................................. 101
Configuring the Windows desktop ................................................. 101

(This page intentionally left blank.)
6

Copyright notice
7
Copyright notice
This document is copyrighted. All rights are reserved. Nor this
document, nor any part of it, may be reproduced or copied in any
form or by any means - graphical, electronic, or mechanical
including photocopying, taping or information storage and
retrieval systems - without written permission of Barco
© 2009 Barco N.V. All rights reserved.

Preface
8
Preface
Notice
Although every attempt has been made to achieve technical
accuracy in this document, we assume no responsibility for errors
that may be found. Our goal is to provide you with the most
accurate and usable documentation possible; if you discover
errors, please let us know.
Barco software products are the property of Barco. They are
distributed under copyright by Barco N.V. or Barco Inc., for use
only under the specific terms of a software license agreement
between Barco N.V. or Barco Inc. and the licensee. No other use,
duplication, or disclosure of a Barco software product, in any
form, is authorized.
The specifications of Barco products are subject to change
without notice.
FCC notice
This equipment has been tested and found to comply with the
limits of a Class A digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
Canadian notice
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme
NMB-003 du Canada.

Preface
9
Disposal Information
This product consists of devices that may contain mercury, which
must be recycled or disposed of in accordance with local, state, or
country laws. (Within this system, the backlight lamps in the
monitor display contain mercury.)
This equipment has required the extraction and use of natural
resources for its production. It may contain hazardous substances
for health and environment.
In order to avoid the dissemination of those substances in the
environment and to diminish the pressure on natural resources,
we encourage you to use the appropriate take-back systems.
Those systems will reuse or recycle most of the materials of your
end-of-life equipment in a sound way.
The crossed-out wheeled bin symbol invites you to use
those systems.
If you need more information on the collection, reuse and
recycling systems, please contact your local or regional waste
administrator.
You can also contact us for more information on the
environmental performances of our products.

Preface
10
Information for China ROHS compliance
Table of toxic and hazardous substances/elements and their content, as
required by China’s management methods for controlling pollution by
electronic information products
中国大陆 RoHS
根据中国大陆《电子信息产品污染控制管理办法》(也称为中国大陆 RoHS)，
以下部份列出了本产品中可能包含的有毒有害物质或元素的名称和含量。
本表适用的产品
液晶显示器
有毒有害物质或元素
Toxic or hazardous Substances and Elements
Part Name Pb Hg Cd Cr6+ PBB PBDE
Metal parts O O O O O O
Plastic parts O O O O O O
PCB or PCBA O O O O O O
LCD panel X X O O O O
Power supply/adapter X O O O O O
Power cable X O O O O O
Connectors and cables O O O O O O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006

Preface
11
LCD Monitor
零部件名稱 有毒有害物質或元素
铅
（Pb）
汞
（Hg）
镉
（Cd）
六价铬
（Cr6+）
多溴联苯
（PBB）
多溴二苯醚
（PBDE）
金属机构件 OOO O O O
塑料机构件 OOO O O O
电路板组件 *OOO O O O
液晶面板 XXO O O O
电源模块 / 适配器 XOO O O O
电源线 XOO O O O
外部信号连接线 OOO O O O
*：电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、集成电路
、连接器等
○：表示该有毒有害物质在该部件所有均质材料中的含量均在 《电子信息产品中有
毒有害物质的限量要求标准》规定的限量要求以下
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 《电子信息产品
中有毒有害物质的限量要求标准》规定的限量要求；
但是上表中打 “×” 的部件，其含量超出是因为目前业界还没有成熟的可替代的技术

Safety Instructions
12
Safety Instructions
General Recommendations
Read the safety and operating instructions before operating the
display.
Retain safety and operating instructions for future reference.
Adhere to all warnings on the display and in the operating
instructions manual.
Follow all instructions for operation and use.
Electrical shock
Type of protection (electrical):
Class I equipment
Degree of safety (flammable anesthetic mixture):
Equipment not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous oxide.
Power connection
• Power requirements: The display must be powered using the
12 VDC power supply that is supplied with the display.
• The 12 VDC power supply must be powered by the AC mains
voltage.

Safety Instructions
13
•Powercords:
Power cord with CEE 7 plug: The colors of the mains lead are
colored in accordance with the following code: Green-and-
yellow: Earth (safety earth), Blue: Neutral, Brown: Line
Power cord with ANSI 73.11 plug: The wires of the power
cord are colored in accordance with the following code:
Green/yellow: ground, White: neutral, Black: line (live)
• Do not overload wall outlets and extension cords as this may
result in fire or electric shock.
• Mains lead protection (U.S.: Power cord): Power cords should
be routed so that they are not likely to be walked upon or
pinched by items placed upon or against them, paying
particular attention to cords at plugs and receptacles.
Water and moisture
Never expose the display to rain or moisture.
Never use the display near water - e.g. near a bathtub,
washbasin, swimming pool, kitchen sink, laundry tub or in a wet
basement.
Ventilation
Do not cover or block the ventilation openings in the cover of the
set. When installing the display in a cupboard or another closed
location, heed the necessary space between the set and the
sides of the cupboard.
Installation
Place the display on a flat, solid and stable surface that can bear
the weight of at least 3 displays. If you use an unstable cart or
stand, the display may fall, causing serious injury to a child or
adult, and serious damage to the equipment.
More warnings in the Installation chapter.

Safety Instructions
14
This apparatus conforms to:
CE, IEC 60950, UL 60950, CAN/CSA C22.2 No. 60950 (c-UL), CCC.
National Scandinavian Deviations for Cl. 1.7.2 :
Finland: "Laite on liitettävä suojamaadoituskoskettimilla
varustettuun pistorasiaan"
Norway: "Apparatet må tilkoples jordet stikkontakt"
Sweden: "Apparaten skall anslutas till jordat uttag"

Recommendations for using your display system
15
Recommendations for using your display system
1. Optimize the lifetime of your display
Enabling the Display Power Management System (DPMS) of your display
(in the display’s Settings menu) will optimize its diagnostic lifetime by
automatically switching off the backlight when the display is not used
for a specified period of time. By default, DPMS is enabled on your
display, but it also needs to be activated on your workstation. To do this,
go to “Power Options Properties” in the “Control Panel”.
Barco recommends setting DPMS activation after 20 minutes of
non-usage.
2. Use a screen saver to avoid image retention
Prolonged operation of an LCD with the same content on the same
screen area may result in a form of image retention.
You can avoid or significantly reduce the occurrence of this phenomenon
by using a screen saver. You can activate a screen saver in the “Display
properties” window of your workstation.
Barco recommends setting screen saver activation after 5 minutes
of non-usage. A good screen saver displays moving content.
In case you are working with the same image or an application with
static image elements for several hours continuously (so that the screen
saver is not activated), change the image content regularly to avoid
image retention of the static elements.
3. Understand pixel technology
LCD displays use technology based on pixels. As a normal tolerance in
the manufacturing of the LCD, a limited number of these pixels may
remain either dark or permanently lit, without affecting the diagnostic
performance of the product. To ensure optimal product quality, Barco
applies strict selection criteria for its LCD panels.
To learn more about LCD technology and missing pixels, consult
the dedicated white paper available at www.barcomedical.com.

Recommendations for using your display system
16
4. Enhance user comfort
Every Barco multi-head display system is color matched with the highest
specification in the market.
Barco recommends keeping color-matched displays together.
Furthermore, it is important to use all displays of a multi-head
configuration at the same rate to preserve color matching
throughout the economic lifetime of the system.
5. Maximize Quality Assurance
The ‘MediCal QAWeb’ system offers online service for high-grade Quality
Assurance, providing maximum diagnostic confidence and uptime.
Learn more and sign up for the free MediCal QAWeb Essential
level at www.barcomedical.com/qa

17
Display Controller Installation

Display Controller Installation
18
(This page intentionally left blank.)

Which display controller?
19
Which display controller?
Your Barco medical display is compatible with a large range of
Barco and non-Barco display controller boards. Depending on the
customer’s order details, the display can be delivered with or
without display controller.
The brochure “Barco medical display overview” on the website
www.barco.com/medical (Downloads section) contains a
comprehensive overview of the compatibility matrix of Barco
displays and Barco display controllers.
If you are using Barco display controllers, please follow the
installation instructions in this section. If you are using a non-
Barco display controller, please consult the corresponding
documentation.
Installing a Barco display controller
This chapter will guide you through the physical installation of a
Barco display controller for your display system.
Caution: Wear a grounded, protective ESD strap when handling
or during installation of the display controller. Electrostatic
charges can damage the display controller.
Overview
Prior to installing the display controller(s) for your BARCO CORONIS
5MP Display System in your PC please take a few minutes to
familiarize yourself with both the display controller(s) and the
PCIe or PCI slots in your computer.
Types of display controllers for Barco Display Systems
The following models of Barco display controllers are available
for your display system. Please check which of the following

Installing a Barco display controller
20
models is delivered with your system, and follow the
corresponding installation instructions:
* Recommended PCI/PCIe slot
Note: You can use x16 & x8 slots for x1, & x4 boards.
If you are using a display controller with a VGA jumper, you will
need to decide if you are going to use its on-board VGA
capabilities. If you are, check the setting of the Jumper at J-1 on
the display controller (see figure 1). By default, VGA should be
enabled, on the top two pins. To disable the on-board VGA
capabilities move the jumper so that it is on the middle and
bottom pins.
Board Model VGA Jumper Compatible PCIe/PCI Slot
Barco MXRT 1150 No x1*, x8, x16
Barco MXRT 2100 No x16
Barco MXRT 2150 No x16
Barco MXRT 5100 No x16
Barco MXRT 5200 No x16
Barco MXRT 7100 No x16
Barco MXRT 7200 No x16
Barco MXRT 7300 No x16
BARCOMED CORONIS PCIe Yes x8*, x16
BARCOMED CORONIS PCI Yes PCI 32 or PCI 64*
BARCOMED NIO PCIe Yes x8*, x16
BARCOMED NIO PCI Yes PCI 32 or PCI 64*
BARCOMED 5MP2FH PCIe Yes x8*, x16
BARCOMED 5MP2FH PCI Yes PCI 32 or PCI 64*