Barco Nio medical display systems Instruction Manual

Installation & User Manual
Nio® medical display systems
Supported displays: E-2620, E-3620, E-5620, E-2621, E-3621

(This page intentionally left blank.)
2

Copyright notice
3
Copyright notice
This document is copyrighted. All rights are reserved. Nor this
document, nor any part of it, may be reproduced or copied in any
form or by any means - graphical, electronic, or mechanical
including photocopying, taping or information storage and
retrieval systems - without written permission of Barco
© 2005 Barco N.V. All rights reserved.

Copyright notice
4
(This page intentionally left blank.)

Table of Contents
5
Table of Contents
Preface........................................................................................ 9
Safety Instructions............................................................................. 13
Explanation of symbols ..................................................................... 16
Overview................................................................................... 17
Introduction ....................................................................................... 19
BarcoMed Nio display controller overview ...................................... 21
Package contents .............................................................................. 23
Parts, controls and connectors.......................................................... 24
Installation................................................................................ 27
Installation precautions..................................................................... 29
Display controller installation ........................................................... 30
Display installation ............................................................................ 34
After unpacking the display....................................................... 34
Power connection....................................................................... 37
Video connection........................................................................ 38
USB connection........................................................................... 39
Cable routing .............................................................................. 39
Attaching the display to an arm stand............................................. 41
Windows 2000 BarcoMed Nio software installation ....................... 43
NioWatch............................................................................................ 57
Display Controller settings........................................................ 59
Barco Display Tab............................................................................... 61
Introduction ................................................................................ 61
Using the Barco Display Tab ...................................................... 62
BarcoMed Driver Tab ......................................................................... 64
Introduction ................................................................................ 64
Using the BarcoMed Driver Tab ................................................. 64
Status .......................................................................................... 65

Table of Contents
6
Palette Mode .............................................................................. 66
Drawing Modes .......................................................................... 68
Monitor Configuration ................................................................ 69
Configuring the Windows 2000 or Windows XP desktop......... 70
Configuring the DualView desktop............................................ 70
BarcoMed Hardware Tab ................................................................... 72
Introduction ................................................................................ 72
Using The BarcoMed Hardware Tab........................................... 73
NioWatch operation.................................................................. 81
Display settings ................................................................................. 84
General ....................................................................................... 84
Display tab.................................................................................. 85
Graphic Board tab....................................................................... 87
Calibration tab ............................................................................ 88
Test patterns ...................................................................................... 93
Application settings........................................................................... 94
Calibration tab ............................................................................ 94
MediCal Administrator tab......................................................... 95
Update NioWatch............................................................................... 97
Display operation...................................................................... 99
Display operation ............................................................................ 101
Stand-by switching................................................................... 101
About the On-Screen Display (OSD)........................................ 102
Locking and unlocking user controls ....................................... 103
Complete OSD overview .......................................................... 105
Cleaning .................................................................................. 107
Troubleshooting......................................................................111
Windows 2000 display resolution ........................................... 116
Configuring the Windows 2000 or Windows XP desktop....... 116

Table of Contents
7
Setting the resolution of your BARCOMED NIO display ............. 117
Driver re-installation, updates or removal..................................... 120
Reinstalling or updating your BarcoMed Nio driver............... 120
Uninstalling the BarcoMed Nio driver or Barco NioWatch
software ..................................................................... 121
Technical Information.............................................................125
Technical specifications................................................................... 127
Connector pin assignments............................................................. 138
Glossary............................................................................................ 139
Warranty Statement ...............................................................141

Table of Contents
(This page intentionally left blank.)
8

9
Preface

Preface
(This page intentionally left blank.)
10
(This page intentionally left blank.)

Preface
11
Notice
Although every attempt has been made to achieve technical
accuracy in this document, we assume no responsibility for errors
that may be found. Our goal is to provide you with the most
accurate and usable documentation possible; if you discover
errors, please let us know.
BarcoView software products are the property of BarcoView.
They are distributed under copyright by Barco N.V. or BarcoView,
LLC., for use only under the specific terms of a software license
agreement between Barco N.V. or BarcoView LLC. and the
licensee. No other use, duplication, or disclosure of a BarcoView
software product, in any form, is authorized.
The specifications of BarcoView products are subject to change
without notice.
Trademarks
All trademarks and registered trademarks are property of their
respective owners.
FCC notice
This equipment has been tested and found to comply with the
limits of a Class A digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.

Preface
12
Canadian notice
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme
NMB-003 du Canada.
Disposal Information
The lamps inside the display contain mercury. Do not throw the
display in the trash. Dispose of it as required by local ordinances
or regulations.

Safety Instructions
13
Safety Instructions
General Recommendations
Read the safety and operating instructions before operating the
display.
Retain safety and operating instructions for future reference.
Adhere to all warnings on the display and in the operating
instructions manual.
Follow all instructions for operation and use.
Electrical shock
Type of protection (electrical):
Class I equipment
Degree of safety (flammable anesthetic mixture):
Equipment not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous oxide.
Power connection
• Power requirements: The display must be powered using the
12 VDC power supply that is supplied with the display.
• The 12 VDC power supply must be powered by the AC mains
voltage.

Safety Instructions
14
•Powercords:
Power cord with CEE 7 plug: The colors of the mains
lead are colored in accordance with the following
code: Green-and-yellow: Earth (safety earth), Blue:
Neutral, Brown: Line
Power cord with ANSI 73.11 plug: The wires of the
power cord are colored in accordance with the
following code: Green/yellow: ground, White:
neutral, Black: line (live)
• Do not overload wall outlets and extension cords as this may
result in fire or electric shock.
• Mains lead protection (U.S.: Power cord): Power cords should
be routed so that they are not likely to be walked upon or
pinched by items placed upon or against them, paying
particular attention to cords at plugs and receptacles.
Water and moisture
Never expose the display to rain or moisture.
Never use the display near water - e.g. near a bathtub,
washbasin, swimming pool, kitchen sink, laundry tub or in a wet
basement.
Ventilation
Do not cover or block the ventilation openings in the cover of the
set. When installing the display in a cupboard or another closed
location, heed the necessary space between the set and the
sides of the cupboard.
Installation
Place the display on a flat, solid and stable surface that can bear
the weight of at least 3 displays. If you use an unstable cart or
stand, the display may fall, causing serious injury to a child or
adult, and serious damage to the equipment.
More warnings in the Installation chapter.

Safety Instructions
15
Operating precautions
Continuous operation of the display with the same screen may
result in some image sticking on the LCD panel.
Over 10 hours operation with the same image content is not
recommended.
Switching on the display DPMS may decrease the risk of image
sticking (image retention).
This apparatus conforms to:
CE (LVD 73/23/EEC), IEC 60950-1, UL 60950-1,
CAN/CSA C22.2 No. 60950-1 (c-UL), EN 60950-1 DEMKO,
CCC GB4943-1995
National Scandinavian Deviations for Cl. 1.7.2 :
Finland: "Laite on liitettävä suojamaadoituskoskettimilla
varustettuun pistorasiaan"
Norway: "Apparatet må tilkoples jordet stikkontakt"
Sweden: "Apparaten skall anslutas till jordat uttag"

Explanation of symbols
16
Explanation of symbols
Symbols on the display and power supply
On the display or power supply, you may find the following
symbols:
Symbols used throughout the manual:
Indicates the display is approved according to
the CE regulations
or
Indicates the display is approved according to
the UL regulations
or
Indicates the display is approved according to
the c-UL regulations
Indicates the display is approved according to
the DEMKO regulations
Indicates the display is approved according to
the CCC regulations
Indicates the USB connectors on the display
Warning Caution
Important notice or
remark
Note
Hint, tip Additional
information

17
Overview

Overview
(This page intentionally left blank.)
18
(This page intentionally left blank.)

Introduction
19
Introduction
Thank you for choosing Barco.
Single display or complete system?
This manual describes installation and usage of a complete NIO
system. A NIO system is a bundling of one or more displays and
one or more display controllers.
However, if you have purchased the display only instead of a NIO
system, please refer to the chapters in this manual covering the
display, and disregard the information about the display
controller or NIOWATCH software.
The displays
The E-2620 is a 19.8-inch grayscale LCD display with a native
resolution of 1600 x 1200.
The E-2621 is a 21.3-inch grayscale LCD display with a native
resolution of 1600 x 1200.
The E-3620 is a 20.8-inch grayscale LCD display with a native
resolution of 2048 x 1536.
The E-3621 is a 21.3-inch grayscale LCD display with a native
resolution of 2048 x 1536.
The E-5620 is a 20.1-inch grayscale LCD display with a native
resolution of 2560 x 2048.
Their high-brightness, combined with image crispness and
excellent viewing angle, makes them ideal for a multitude of
medical applications and environments.
Long-term stabilization
The displays contain a Backlight Output Stabilization system
(BLOS©), which continuously stabilizes the luminance output of
the LCD’s backlight. This improves the overall optical efficiency
and provides long-term image confidence.

Introduction
20
NioWatch
In NIO systems, the display comes standard with NIOWATCH, a
user-friendly software tool that optimizes the LCD panel for
DICOM-compliant viewing.
Power saving
The displays are equipped with a power saving system. When left
idle for a certain time, the computer connected to the display,
will power down the display.
The power saving system can be switched on or off using the on-
screen menus.
Tilt & swivel base
The versatile tilt & swivel foot allows to use the display for
viewing portrait or landscape image resolutions.
The user can easily change the panel height and viewing angle,
allowing to use the display in the optimal viewing conditions.