Barco Coronis 5MP Mammo Technical manual

Online User Guide
Coronis 5MP Mammo

(This page intentionally left blank.)
2
(This page intentionally left blank.)

Table of contents
3
Table of contents
Using the online User Guide...................................................4
Sources of information ............................................................. 4
User interface............................................................................ 4
Graphic board control panel ...................................................6
Languages supported ............................................................... 6
Barco Driver Properties............................................................. 7
Advanced properties for MXRT controller................................ 9
Advanced Properties for BarcoMed Coronis or
BarcoMed Nio ......................................................................... 14
Configuring the Windows desktop......................................... 19
Display information .............................................................20
Precautions.............................................................................. 20
Display controls....................................................................... 22
On-screen display (OSD)......................................................... 25
Switching Power LED on/off .................................................. 31
Switching DPMS on/off .......................................................... 32
Changing Display Functions ................................................... 32
Barco web sites ....................................................................37

Using the online User Guide
4
Using the online User Guide
Sources of information
Overview of product documentation
User interface
Items in the navigation frame:
Document Content
Quick install sheet
(poster in box)
Gives a short overview of the installa-
tion of a complete system.
Getting started guide
(booklet in box)
Gives a detailed description of the
installation and connection of a com-
plete system.
Online user guide
(html file installed on PC)
Gives a detailed description of how to
operate the display using its local con-
trols and on-screen display (OSD). This
document is to be consulted on screen.
User manual
(PDF file on CD-ROM)
Contains the same information as the
online user guide, but is laid-out for
printing.
Item Description
Contents Shows the complete content of the help
system.
Index Shows the available help topic entries in
alphabetic order.
Search Allows to search for a particular entry in
the help system.

Using the online User Guide
5
Items in the toolbar frame
Favorites Allows to add and remove help topics to
a list of favorites. (requires cookies)
Item Description
Item Description
Synchronize Press this button to show the location of
the help item in the Contents.
Previous Press this button to move to the previ-
ous help topic.
Next Press this button to move to the next
help topic.
Related topics Press this button to display related top-
ics (if available).
E-mail Press this button to e-mail the current
help topic.
Print Press this button to print the current
help topic.
Bookmark Press this button to bookmark the cur-
rent help topic. This topic will then
appear in the web browser’s Favorites
menu. (requires cookies)

Graphic board control panel
6
Graphic board control panel
This chapter describes how to configure the displays in your BARCO
CORONIS 5MP MAMMO Display System using the tools available through
the Advanced button on the Settings tab of the Windows Display
Control Panel.
Note: If you purchased Barco Medical Displays only and not a
complete BARCO CORONIS 5MP MAMMO Display System you will
need to refer to the user manual for the display controller you
are using.
Languages supported
The BarcoMed tabs support the following languages:
English (U.S) (default)
Dutch
French
German
Italian
Japanese
Korean
Simplified Chinese
Traditional Chinese
Spanish
Note: To change between the languages select the correct
region via the Regional Settings Control Panel in your machine’s
Start > Settings > Control Panel.

Graphic board control panel
7
Barco Driver Properties
Accessing the Barco tab
Note: You must have logged on to Windows using an account
with administrator privileges in order to use the Barco portions
of the Windows Display Control Panel to change any display
settings.
1. Open the Windows Display Control Panel by one of the methods
below:
a) Start > Settings > Control Panel > Display
b) Open the “Display Properties Control Panel” by right
clicking in an empty area on the desktop, then select
Properties.
c) Windows Vista: Right click in an empty area on the
desktop, select “Personalization”, then click on“Display
Settings”.
2. Click on the Settings tab (The Settings tab is not present in
Vista).
3. Select the rectangle that represents the BARCO CORONIS 5MP
MAMMO Display whose settings you wish to change.
4. Click on the Advanced Settings button.
5. Select the Barco tab from the Properties screen.
Using the Barco tab
The Barco tab is divided into three sections. The first section provides
information about the graphics controller and allows access to the
graphics controller advanced configuration pages. The second section
provides information about the display. The bottom section allows
access to two Barco tools, Barco System Report and MediCal QAWeb.
Also, there is a active link to the Barco Medical Imaging Systems web
site.

Graphic board control panel
8
Figure 1: Ex: Barco Tab
Display Information
Name: Displays the model name of the display.
Serial Number: Displays the serial number of the display.
Backlight LifeTime: This is the amount of time in hours that the
backlight has been on. The backlight will typically last a very long
time, but will only be able to hold the recommended calibrated
luminance for a certain amount of time, after which time it will
become slowly dimmer.
Barco system report
The Barco System Report, also known as BarcoMed SelfExam, is a
wizard based tool which collects data about the components that are

Graphic board control panel
9
installed in your system. This information is used by the Barco MIS
Support team when trying to resolve customer issues.
MediCal QAWeb
Clicking on the QA Web button will launch the MediCal QAWeb
application. Please refer to the MediCal QAWeb manual for
information about this application.
Advanced properties for MXRT controller
To access the advanced properties configuration pages for the display
controller(s) for your BARCO CORONIS 5MP MAMMO Display System, click
on the Advanced button in the Graphics Device Information section.
There are several pages accessible from the advanced configuration
button. They are:
• Barco Adapter Configuration
• OpenGL
• Direct3D
• Rotation (when supported)
•Details
• OpenGL Profiles
Barco Adapter Configuration
The Barco Adapter Configuration page allows you to switch between
the following monitor configurations and display options for the
displays connected to a Barco MXRT controller:
Display Layout
• DualView
Both displays are enabled independent of each other.
• SingleView
A single large desktop spans across both displays.

Graphic board control panel
10
•Clone
The primary display is cloned to the secondary display.
Color Format
• 24-Bit TrueColor Mode
• 30-Bit TrueColor Mode (HDR)
Display Resolution
• Sets display resolution for 1 or 2 displays.
Note: To switch out of SingleView or Clone mode, the
buttons in this Control Panel page must be used. The main
Windows Control Panel cannot be used. Depending on your
system, certain configurations can be disabled.
Note: Clone Mode is supported for two color displays or
projectors in 32bpp. Clone mode is not supported on grayscale
displays. Also, HDR is not supported while in Clone Mode.
When choosing Clone Mode under the Barco Adapter
Configuration page, if two displays are enabled, then the larger
of the two current resolutions will be used. If only one of the
two displays is enabled, the enabled displayís current resolution
will be used.
When the resolution set for clone mode is larger then the
maximum supported on a display, the resolution set on the
Master will automatically be scaled to maximum resolution of
the Cloned display. If the Scale to Display Preferred Mode is
checked, the maximum resolution will be the EDID preferred
mode. If it is unchecked, then it will be the largest mode in the
Cloned displays mode list. Clone mode can only be exited
through the Barco Adapter Configuration page in the Barco
Advanced Control Panel.
Note: Not all options are available at all times. Please select
the help tips in the driver software for more information.