Bartscher 173.195 User manual

- 1 -
173.195
173.220
173.250
173.275
173.300
Bedienungsanleitung
Elektrische Aufschnittmaschinen
Seite 3 bis 19
Instruction manual
Electric slicers
from page 21 to 37
Mode d’emploi
Trancheuse électrique
de page 39 à page 55
V
2
/
07
1
1
D/A/CH
GB/UK
F/B/CH

- 21 -
1. General Information 22
1.1 Information about the instruction manual 22
1.2 Key to symbols 22
1.3 Liability and Warrantees 23
1.4 Copyright protection 23
1.5 Declaration of conformity 23
2. Safety 24
2.1 General information 24
2.2 Safety instructions for use of the device 24-25
2.3 Intended use 25
3. Delivery, packaging and storage 26
3.1 Delivery check 26
3.2 Packaging 26
3.3 Storage 26
4. Technical data 27
4.1 Overview of parts 27-28
4.2 Technical specification 28
5. Installation and operation 29
5.1 Safety instructions 29-30
5.2 Installation and connection 30
5.3 Operating 31-34
6. Cleaning and maintenance 34
6.1 Safety advice 34
6.2 Cleaning 34-35
6.3 Safety instructions for maintenance 36
7. Possible Malfunctions 36
8. Waste disposal 37
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]
GB/UK
Keep this instruction manual
ready to hand at the product!

- 22 -
1. General information
1.1 Information about the instruction manual
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
1.2 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards, which could lead to injury.
Please follow the instructions very carefully and proceed with particular attention
in these cases.
WARNING! Electrical hazard!
This symbol draws attention to potential electrical hazards. If you do not follow
the safety instructions, you may risk injury or death.
CAUTION!
This symbol highlights instructions, which should be followed to avoid any risk of
damage, malfunctioning and/or breakdown of the device.
NOTE!
This symbol highlights tips and information, which have to be followed for
an efficient and trouble-free operation of the device.

- 23 -
1.3 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology. If you have any
questions, you should contact the manufacturer.
NOTE!
Read the instruction manual carefully before using the device. The manufacturer
does not accept liability for any damage or malfunction resulting from not
following the instructions for use.
The instruction manual should be kept near the device, easily accessible for anyone
wishing to work with or using it. We reserve the right to make technical changes for
purposes of developing and improving the useful properties.
1.4 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are copyright
and subject to other protection rights. Any person unlawfully using this
publication is liable to criminal prosecution.
1.5 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity.
If required we will be glad to send you the according declaration of conformity.

- 24 -
2. Safety
This section provides an overview of all important safety aspects.
In addition every chapter provides precise safety advice for the prevention of dangers
which are highlighted by the use of the above mentioned symbols.
Furthermore, attention should be paid to all pictograms, markers and labels on the
device, which must be kept in a permanent state of legibility.
By following all the important safety advice you gain an optimal protection against all
hazards as well as the assurance of a safe and trouble-free operation.
2.1 General Information
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
Knowing the contents of the instruction manual as well as avoiding mistakes and thus
operating this device safely and in a fault-free manner is very essential to protect
yourselves from the hazards.
To prevent hazards and to ensure optimum efficiency, no modifications or alterations to
the device that are not explicitly approved by the manufacturer may be undertaken.
This device may only be operated in technically proper and safe condition.
2.2 Safety instructions for use of the device
The specifications regarding the industrial safety are based on the Regulations of the
European Union applicable at the time of manufacturing the device.
If the device is used commercially, the user is obliged to ensure that the said industrial
safety measures concur with the state of the rules and regulations applicable at the time
in question for the entire period of use of the device and to comply with the new
specifications.
Outside the European Union, the industrial safety laws applicable at the place of
installation of the device and the regional territorial provisions must be complied with.
Besides the industrial safety instructions in the instruction manual, the general safety and
accident prevention regulations as well as environment protection regulations applicable
for area of application of the device must be followed and complied with.
CAUTION!
oThe device is not intended for use by individuals (including children) with physical or
mental disabilities, insufficient experience, and/or insufficient knowledge unless such
persons are under the care of a person responsible for their safety or have received
instructions regarding appropriate use of the device.

- 25 -
oChildren should be observed to ensure that they are not playing with the device.
oPreserve this manual safely. When passing on/selling the device to a third party, the
manuals must be handed over along with the device.
oEvery person using the device must act in accordance to the manuals and under
consideration of the safety advice.
oThe device is to be used indoors only.
2.3 Intended use
Safe operation is only guaranteed when using the device for its intended purpose.
Any technical interventions, as well as assembly and maintenance are to be made by a
qualified customer service only.
The slicer has been designed to cut the following types of food only:
-sausages (cooked, raw, smoked);
-boned meat (raw or cooked);
-chilled cheese (only kinds meant to be cut);
-vegetables (all kinds)
You must not cut the following with the slicer:
-frozen meat;
-meat and fish with bones;
-products which are not food.
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use are
impossible.
The operator is liable for all damages resulting from inappropriate use.

- 26 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately after
receipt.
In case of visible damage do not accept or accept the delivery with reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in your
country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
-Do not store outdoors.
-Keep it dry and dust-free.
-Do not expose it to aggressive media.
-Do not expose it to direct sunlight.
-Avoid mechanical shocks and vibration.
-In case of longer storage (> 3 months) make sure you
check the state of the packaging and the parts regularly.
If required refresh or renew.

- 27 -
4. Technical data
4.1 Overview of parts
①
Sharpener
②
Knife
③
Knife protective ring
④
Knife cover
⑤
Pusher handle
⑥
Food carriage tray
⑦
Food carriage
⑧
Carriage adjustment
⑨
Slice thickness adjustment
⑩
ON-/OFF button
⑪
Slice tray
⑫
Cut thickness movable wall
⑬
Pusher cover
①
②
⑩
④⑤
⑧
⑨
⑪
⑥
⑫
⑬
⑦
③

- 28 -
ON-/OFF button
4.2 Technical specifications
Description Electric slicers
Art. no.:
173.195 173.220 173.250 173.275 173.300
Type: HBS-195
HBS-220A
HBS-250A
HBS-275A
HBS-300A
Finish: Eloxal aluminum cover
-
sprayed varnish
Power: 120 W 120 W 150 W 150 W 250 W
Voltage: ~50 Hz 230 V
Knife revolution: 432 min־¹356 min־¹ 356 min־¹ 315 min־¹ 315 min־¹
Knife diameter, Ø: 195 mm 200 mm 250 mm 275 mm 300 mm
Slice thickness (mm):
0,2–17 0,2–19 0,2–16 0,2–15 0,2–18
Cut lengh (mm)t: 150 170 160 180 200
Cut height (mm): 130 170 170 200 200
Dimensions
(mm):
B 375
T 410
H 320
B 375
T 485
H 370
B 400
T 485
H 355
B 470
T 535
H 430
B 455
T 575
H 435
Weight: 12.3 kg 14.3 kg 14.8 kg 20.3 kg 20.8 kg
Subject to technical changes and alterations!
Red button STOPGreen button START

- 29 -
5. Installation and operation
5.1 Safety instructions
WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with
protective contact.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
•See that the cable does not touch any heat sources or sharp edges. Do not let the
cable dangle over the counter edge.
•Do not use the device in case it does not function properly, has been damaged or
dropped.
•Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•NEVER deactivate or remove the safety device.
Mechanical safety parts:
-Knife cover;
-Knife protective ring;
-Pusher handle with a distance element;
-Pusher cover;
Electrical safety parts:
-Micro switch
↳
↳↳
↳ stops the slicer if the operator loosens the knife adjustment screw and
makes it impossible to turn the unit on until the cover comes back to a
proper position.
-START / STOP buttons
↳
↳↳
↳ in case of lack of electricity supply the unit may be turned on again only
by another use of this button.
•Do not move or tilt the device when in operation.