Baumatic B906.6SS User manual

B906.6SS
BO796.6SS
BO796.6BL
Feature List

Note: Please refer to the Installation and Maintenance
manual which accompanies this user manual for important
instructions regarding the correct installation and
maintenance of your oven and important safety instructions.

3
ENGLISH
Top cavity
1Temperature selector.
2Heating indicator light. Indicates that the heat
is going to the food and it goes out when the
set temperature is reached.
3Function selector.
Main cavity
4Electronic clock.
5Function selector.
6Heating indicator light.
7Temperature selector.
8Fan oven + temperature selector.
Model BO796.6 SS/BO796.6 BL
Model B906.6 SS
Control Panel
Oven Functions
09:05
32 1 4 8 6
09:05
1 2 3 4 5 76
Model B906.6 SS
Top cavity: ////
Main cavity: ////
Model BO796.6 SS/BO796.6 BL
Top cavity: ////
Main cavity:
Switch off oven
Conventional
It is used for sponges and cakes where the heat
received must be uniform to achieve a spongy
texture.
Lower Element
Heats only from beneath. Suitable for heating
dishes and raising pastry and similar.

MaxiGrill
Allows greater surfaces to be prepared, than
with the grill, together with higher power
reducing the time required for browning of the
food.
Grill
For preparing dishes with superficial roasting. It
allows the outer layer to be browned without
affecting the inside of the food. Ideal for flat
food, such as steaks, ribs, fish, toast.
Grill with fan
Allows uniform roasting at the same time as
surface browning. Ideal for grills. Special for
large volume pieces, such as poultry, game etc.
It is recommended to put the item on a rack
with a tray beneath to collect the stock and
juices.
Caution
While using the Grill, MaxiGrill or Grill with fan
the door must be kept closed.
Turbo
The fan distributes the heat produced by an
element located at the rear of the oven. Due to
the uniform heat distribution, it allows roasting
and baking to take place on two levels at the
same time.
Defrosting
This cooking mode is suitable for gentle
defrosting of delicate food to be consumed
unheated, e.g.: cream, custard, pastry, tarts,
cakes, fruit,...
Note
The pilot light remains on in any cooking
function.
Model B906.6 SS
Setting the time on the clock
On connecting the oven, you will notice that
12:00 appears on the clock and that a light
begins to flash above the symbol. Pressing
the “+” and “-“ buttons the correct time can be
set on the clock, which is subsequently stored
and the flashing light goes out.
Manual use
After setting the correct time, the oven is ready
for use. Select a temperature and a cooking
function.
To switch off the oven, set the controls to the
position .
Functions of the Electronic Clock Programmer
Warning function: This function generates a
warning tone at a specified time.
Cooking time: This function allows to
programme the oven to cook for a specified
time, after which it will switch itself off.
End of cooking time: This function allows to
establish the exact hour, after which the oven
will switch itself off.
Duration and automatic stop: This function is
used to control the duration and the time at
which the oven will turn itself off. This function
allows the oven to start and stop automatically.
Warning function
1Press the MODE button until the signal above
the symbol begins to flash.
2Choose the time when you want the alarm to
sound, pressing the “+” or “-“ buttons.
3Subsequently, the light will remain on
indicating that the alarm is programmed.
4At the end of the programmed time, an alarm
will sound and the light will begin to flash.
5Press any button to turn off the alarm and the
screen shows the current time again.
Use of the Oven
4

5
ENGLISH
Programming the cooking time
1Press the MODE button until the indicator
above the symbol begins to flash.
2Select the length of time, pressing the “+” or
“-“ buttons.
3Subsequently, the indicator that was flashing
will light, indicating that the oven will switch
itself off automatically.
4The clock will then show the current time.
5Select a temperature and cooking function.
6When the set time has elapsed, the oven will
disconnect, an alarm will sound and the
indicator will begin to flash.
7Press any button to switch off the alarm,
reconnecting the oven.
8Set the controls in the position to switch off
the oven.
Programming the end of cooking time for the
oven
1Press the MODE button until the indicator
above the symbol begins to flash.
2Select the time that cooking is to finish,
pressing the “+” or “-“ buttons.
3Subsequently, the indicator that was flashing
is lit, indicating that the oven will switch itself
off automatically.
4The clock will then show the current time.
5Select a temperature and a cooking function.
6When the programmed time is reached, the
oven will disconnect, an alarm will sound and
the indicator will begin to flash.
7Press any button to switch off the alarm and
the oven will reconnect.
8Set the controls to the position to switch off
the oven.
This function may be used even though you are
already cooking in your oven. To do so, follow the
instructions given except Nº 5.
Programming the duration and automatic stop
1Press the MODE button until the indicator
above the symbol begins to flash.
2Select the length of cooking time pressing
the “+” or “-“ buttons.
3Subsequently, the indicator that was
flashing will remain lit.
4Press the mode button until the indicator
above the symbol begins to flash.
5Select the time that cooking should finish
pressing the “+” or “-“ buttons.
6Subsequently, the indicator that was
flashing will remain lit.
7Select a function and cooking temperature.
8The oven will remain disconnected with the
indicators above the and symbols
lit. Your oven is programmed.
9When the time to begin cooking is reached,
the oven will switch itself on and will
continue cooking during the programmed
time.
10 When the programmed finishing time is
reached, the oven will disconnect, an alarm
will sound and the light above the
symbol will begin to flash.
11 Press any button to switch off the alarm and
the oven will reconnect.
12 Set the controls to the position to switch
of the oven.
Caution
Pressing the MODE button the display on the
screen shows any function programmed. It can
be changed by pressing the “+” or “-“ buttons.
On selecting the desired function, the indicator
above the corresponding signal will light.
In the event of a power cut, all the programming
of the electronic clock will be erased. The
correct time has to be reset and the watch
reprogrammed.
09:05

6
Model BO796.6 SS/BO796.6 BL
Setting the Time on the Clock
On connecting the oven you will notice that day-
time flashes on the display, starting from 0:00
and the auto symbol A flashes.
Press the “+” and “-” buttons simultaneously
and then pressing the “+” or “-” buttons the cor-
rect time can be set on the display.
Manual Use
After setting the correct time, the oven is ready
for use. The symbol is illuminated on the dis-
play. Select a temperature and a cooking func-
tion.
To switch off the oven, set the controls to the
position.
Warning Function
This function generates a buzzer interval alarm
signal at a specified time.
1Press the MODE button until the symbol
begins to flash.
2Choose the time when you want the alarm to
sound, pressing the “+” or “-” buttons.
3Subsequently, the symbol will remain on
indicating that the alarm is programmed.
4At the end of the programmed time, an
acoustic interval signal will sound and the
symbol will begin to flash.
5Press any button to turn off the acoustic
signal.
The buzzer signal frequency can be changed by
MINUS in 3 circular steps. For listening to the
actual valid signal, press “-” button for some sec-
onds while the display reads the time of the day.
Every new key press within the time window
changes the buzzer signal. Now this tone is valid
as program end alarm signal.
Use of the Oven
Programming the Cooking Time
This function allows to programme the oven to
cook for a specified time, after which it will
switch itself off.
1Press the MODE button until the display
automatically switches over between “dur”
display and duration time setting mode. The
symbol A is flashing.
2Select the duration, pressing the “+” or “-”
buttons.
3Subsequently, the symbol A that was flashing
will light, indicating that the oven will switch
itself off automatically.
4The display will then show the current time.
5Select a temperature and cooking function.
6When the set time has elapsed the oven will
disconnect, the symbol will switch off, an
acoustic interval signal will sound and the
symbol A will begin to flash.
7Press any button to switch off the acoustic
signal, reconnecting the oven.
8Set the controls in the position to switch off
the oven.
Programming the End of Cooking Time for the
Oven
This function allows to establish the exact hour,
after which the oven will switch itself off.
1Press the MODE button until the display
automatically switches over between “End”
display and end time setting mode. The
symbol A is flashing.
2Select the time that cooking is to finish,
pressing the “+” or “-” buttons.
3Subsequently, the symbol A that was flashing
will light, indicating that the oven will switch
itself off automatically.
4The display will then show the current time.
5Select a temperature and cooking function.
6When the programmed time is reached the
oven will disconnect, the symbol will
switch off, an acoustic interval signal will
sound and the symbol A will begin to flash.
7Press any button to switch off the acoustic
signal and the oven will reconnect.

7
ENGLISH
8Set the controls to the position to switch off
the oven.
This function may be used even though you are
already cooking in your oven. To do so, follow the
instructions given except Nº 5.
Programming the Duration and Automatic Stop
This function is used to control the duration and
the time at which the oven will turn itself off. This
function allows the oven to start and stop auto-
matically.
1Press the MODE button until the display
automatically switches over between “dur”
display and duration time setting mode. The
symbol A is flashing.
2Select the duration, pressing the “+” or “-”
buttons.
3Subsequently, the symbol A that was flashing
will light, indicating that the oven will switch
itself off automatically.
4Press the MODE button until the display
automatically switches over between “End”
display and end time setting mode. The
symbol A is flashing.
5Select the time that cooking is to finish,
pressing the “+” or “-” buttons.
6Subsequently, the symbol A that was flashing
will light, the symbol will switch off and
the oven will remain disconnected. Your oven
is programmed.
7Select a function and cooking temperature.
8When the time to begin cooking is reached, the
oven will switch itself on and will continue
cooking during the programmed time.
9When the programmed finishing time is
reached, the oven will disconnect, an
acoustic interval signal will sound and the
symbol A will begin to flash.
10 Press any button to switch off the acoustic
signal and the oven will reconnect.
11 Set the controls to the position to switch
of the oven.
Caution
Pressing the MODE button the display on the
screen shows any function programmed. It can
be changed by pressing the “+” or “-“ buttons.
Program times for automatic programs can be
cleared by pressing “+” and “-” simultaneously.
For clearing warning function, first you must be
select the warning function in the display.
09 · 05

8
Tray Handle
The tray handle is used when you need to remove the tray to check the food. See figures. To lift the
tray out of the oven, you need to use gloves to protect yourself.
Cake tray handle position. You must put the
short hook over the tray.
Short hook Long hook
Roasting tray handle position. You must put the
long hook over the tray.

ENGLISH
Energy
efficiency
class on a
scale of A
(more efficient)
to G (less
efficient).
Heating
function.
Conventional.
Forced air
convection.
Energy
consumption.
Conventional.
Forced air
convection.
Usable volume
(litres).
Size:
Small
Medium
Large
Time to cook
standard load.
Conventional.
Forced air
convection.
Baking area.
Noise (dB (A)
re 1 pW).
A
- - -
0,79
Kwh
59
- - - -
43 min.
1300 cm2
- - -
A
- - -
0,68
Kwh
40
- - - -
39 min.
1300 cm2
- - -
BROCHURE
Manufacturer BAUMATIC BAUMATIC
Model B906.6 B796.6

United Kingdom
Baumatic Ltd.,
Baumatic Buildings,
6 Bennet Road,
Reading, Berkshire
RG2 0QX
United Kingdom
Sales Telephone
[phone]
Sales Fax
[phone]
Customer Care Telephone
[phone]
Customer Care Fax
[phone]
Spares Telephone
[phone]
Advice Line Telephone
[phone]
E-mail:
[email protected]
[email protected]
[email protected]
[email protected]
Website:
www.baumatic.co.uk
Facebook:
www.facebook.com/baumatic.uk
Republic of Ireland
Service Telephone
1-890 812 724
Spares Telephone
091 756 771
Czech Republic
Baumatic CR spol s.r.o.
Lípovà 665
460 01 Liberec 4
Czech Republic
[phone]
www.baumatic.cz
Slovakia
Baumatic Slovakia, s.r.o.
Panenská 34
811 03 Bratislava - Staré Mesto
Slovakia
[phone]
www.baumatic.sk
Germany
Baumatic Gmbh
Bachstr.10-12
D-32 257 Bu¨nde
Deutschland
[phone]
www.baumatic.de
Italy
Baumatic Italia S.R.L.
Via Galvani N.3
35011 Campodarsego (PD)
[phone]
www.baumatic.it
Holland
Baumatic Benelux B.V.
Dukdalfweg 15d
1332 BH ALMERE
Nederland
[phone]
www.baumatic.n
Our contribution to enviromental protection: we use recycled paper. Cod.: 3172657-000