BDI Hokkaido Table User manual

Hokkaido TableTM
Assembly Instructions
HIGH PERFORMANCE
FURNITURE FOR YOUR
HOME

Your Hokkaido Table™is designed and engineered for easy assembly. Carefully follow
this procedure to prevent any damage.
Placement and Maintenance
Hokkaido Table™is designed for indoor use on level floors. Clean glass with glass
cleaner; clean steel parts and wood veneer with a moist cloth.
Step 1 - Unpack and identify parts listed below.
The assembly workspace should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at: [e-mail] For all other concerns
please contact your local BDI Retailer.
www.bdiusa.com
customerser[email protected]
Designed by Matthew Weatherly
‘Hokkaido’ is a trademark of Becker
Designed, Inc. All rights reserved.
©2006 Becker Designed, Inc.
Step 2 - Lay glass panel (A) so that the pucks are facing up.
Step 3 - Install short metal leg (C) to glass puck.
Step 4 - Lay wood panel (B) onto previously installed upper legs. Note* finished wood side facing downward.
Step 5 - Install long metal leg (D) through wood panel hole and into the threaded hole of short metal leg (C).
Step 6 - Flip assembled unit over onto base leg position.
B- Wood Panel x 1
A- Glass Panel x 1
C- Short Metal Leg x 4
D- Long Metal Leg x 4
Glass Puck