BDI LINEA 6223 User manual

LINEA™6223
WORK DESK
DESIGN MATTHEW WEATHERLY
INSTRUCTION MANUAL

BDIUSA.COM | 3NEED ASSISTANCE? [e-mail]
Congratulations on the purchase of your Linea Work Desk 6223 from BDI. Your desk
has been designed to provide a lifetime of enjoyment. This manual will provide you with
assembly instructions and other helpful information that will ensure that you get the
most out of your product. Please save it for future reference.
Your Linea Work Desk has been engineered for simple assembly. Please follow these
directions carefully to prevent any damage.
Should you need further assistance, contact BDI at cust[email protected]om.
ENJOY!

4 | BDIUSA.COM LINEA 6223
PART # C2
DESCRIPTION Leg Frame – Left
QUANTITY 1
PART # C3
DESCRIPTION Leg Frame – Right
QUANTITY 1
PART # C1
DESCRIPTION Top Panel
QUANTITY 1
HARDWARE AND COMPONENTSHARDWARE AND COMPONENTS
Unpack and identify the parts listed below. The assembly workspace should be a non-marring
surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at
customerservic[email protected].
Do not use power tools for the assembly of this product.
For all other concerns, please contact your BDI retailer.
PART # T1
DESCRIPTION Hex Wrench
QUANTITY 1
PART # H1
DESCRIPTION M6 x 10mm Screw
QUANTITY 10
PART # H2
DESCRIPTION M6 x 16mm Screw
QUANTITY 6

PART # C4
DESCRIPTION Wire Trough
QUANTITY 1
PART # C6
DESCRIPTION Power Strip Mounting Kit
QUANTITY 1
BDIUSA.COM | 5NEED ASSISTANCE? [e-mail]
HARDWARE AND COMPONENTS
PART # C5
DESCRIPTION Wire Management
Extrusion
QUANTITY 1
(4) Neodymium Magnets

6 | BDIUSA.COM LINEA 6223
ASSEMBLY STEP 1. ATTACH WIRE TROUGH
Connect (C4) Wire Trough to (C1) Top Panel
Assembly using 4 (H1) Screws. Partially tighten
with (T1) Hex Wrench. The (C4) Wire Trough is
reversible and can be installed facing toward the
front or back of the desk as needed.
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H1-SCREW 4
C4
C4
C1
C1
H1
H1
H1
H1
H1
H1
H1
H1

BDIUSA.COM | 7NEED ASSISTANCE? [e-mail]
Connect (C2) Left Leg Frame to (C4) Wire
Trough using 2 (H1) Screws. Fasten to (C1) To p
Panel Connection Tab using 1 (H1) Screw.
Partially tighten screws.
Connect (C3) Right Leg Frame to (C4) Wire
Trough using 2 (H1) Screws. Fasten to (C1) To p
Panel Connection Tab using 1 (H1) Screw.
Partially tighten screws.
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H1-SCREW 6
C2
C4
C1
H1
H1
H1
C2
Top Panel Connection Tab
STEP 2. ATTACH LEG FRAMES ASSEMBLY
C3
C4
C1
H1
H1
H1
C2
Top Panel Connection Tab

8 | BDIUSA.COM LINEA 6223
Fasten (C2) and (C3) Leg Frames to (C1) Top
Panel using (H2) Screws. Tighten all screws
connecting Legs and Wire Trough.
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H2-SCREW 6
ASSEMBLY STEP 3. FASTEN LEG FRAMES
C2
C3
C1
H2
H2
H2
H2
H2
H2

BDIUSA.COM | 9NEED ASSISTANCE? [e-mail]
STEP 4. INSTALL WIRE MANAGEMENT EXTRUSION
—OPTIONAL ASSEMBLY
With help from another person, carefully position your Linea Work Desk onto its base. Once the
desk is upright, install the (C5) Wire Management Extrusion on the leg of your choice.
2 PERSON TASK
C5

10 | BDIUSA.COM LINEA 6223
FINE TUNING
(4) Neodymium Magnets
POWER STRIP MOUNTING KIT (Power strip not included)
Your Linea Work Desk is equipped with built-in levelers. Dial down one or more levelers (by hand)
until you attain a level stance.
Dial down