BDI SIGMA 6907 User manual

bdiusa.com
[e-mail]
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Sigma™Office furniture is designed for indoor use on level floors. Clean
glass with glass cleaner, and other surfaces with a damp cloth.
Your Sigma™Office furniture is engineered for easy assembly.
Carefully follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.
A1 Cabinet
C6 File Bar Clip x 2
C4 Small File Bar x 1
C8 Locking Swivel
Caster x 5
Designed by BDI Studio.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Sigma & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in Turkey. 02.18.2019 V2
SIGMATM 6907
MOBILE FILE
H1 Phillips M4
Screw x 20
Hardware List:
Required tools:
Phillips screwdriver

bdiusa.com
[e-mail]
SIGMA 6907
MOBILE FILE
2
Step 3 - For forward facing letter sized files simply place your hanging folders on the 2 side rails.
For sideways facing letter files, proceed to step 3B.
Step 2 - Lay Cabinet on its back side. Attach Casters to Cabinet using Screws H1 and tighten with a
Phillips screwdriver. With help from another person, stand the cabinet onto its feet. Casters can be locked
and unlocked by pressing or lifting the lever.
C8 x 5
H1 x 20
lower drawer
2 Person Ta sk

bdiusa.com
[e-mail]
SIGMA 6907
MOBILE FILE
3
Step 3B - File Bar Installation (Letter File)
For letter files facing sideways, attach File Bar Clip C6 to both ends of Small File Bar C4 as shown. Place the
file bar assembly in the notches located on the left and right drawer side panels. For sideways facing legal files,
skip this step entirely.
C6
C4
Notch
C6
C4
1 2
3