BECA BAC-8000 Series User manual

℃
℃
℃
℃
20

Before using your Wi-Fi thermostat for the first time,you must
configure the Wi-Fi signal and settings through your smartphone
or tablet ,This will allow communication between your
connecteddevices
ABOUT WIFI
WI-FI CONNECTION
Step 1 Download your APP （Fig1-1）
Fig 1-1 Fig 1-2 IOS Fig 1-3 Android
Search for "Smartlife" in Apple Store or Google Play or use a
browser to scan the QR code above (Figure 1-2), and complete
account registration and installation according to the guidance
of the APP.
Step 2. Connect the thermostat
Check the tutorial below to complete the connection and setup.
Fig2.1 Fig2.2
Scan this QR code Fig2.3
Network distribution mode:
1、 EZ Mode
When the thermostat is off, press
and hold the " "until the
thermostat screen flashes quickly
and displays the " " icon,
and then operate according to the
following figure (Fig 2.4-Fig 2.7).
Fig2.4
Fig2.5
Fig2.6
Fig2.7
2、AP Mode
When the thermostat is off, press and hold the " " until the
thermostat screen flashes slowly and the " " icon is displayed
(if the " " icon appears, continue to press the " " until the
thermostat screen Flashes slowly and displays the “ ” icon),
and then operate according to the following figure (Fig 2.8-Fig 2.14).
Fig2.8 Fig2.9
Fig2.10 Fig2.11
Fig2.12 Fig2.13
Fig2.14
After connecting to this hotspot,
return to the "smartlife" APP
APP operation interface description
(FCU thermostat)）
More settings
Modify the name
of the thermostat
View the virtual ID
of the thermostat
Connect smart voice
audio guide
Share the thermostat
with your family
Group multiple
thermostats for
management
Fig2.3.1
Method 1: Scan the QR code to configure the network guide
(Fig 2.1-Fig 2.3)
Method 2: Ordinary distribution
network guidance
(Fig. 2. 1&Fig. 2.3.1)
Thermostat
name
More
Energy saving
Button lock
Set temp.
Power
Fan speed
High ,Med. ,Low, Auto.
Current fan
speed
Mode
Heating, Cooling,
Ventilation
Room
temp.
Adjust temp.Programmable
mode
Manual
mode