BECA BHT-001 Series User manual

FEATURES
On Appearance
DIMENSION
TECHNICAL DATA
Power Supply: 95 ~ 240 VAC, 50 ~ 60HZ
Sensor: NTC3950, 10K±1%
Accuracy: ±0.5℃
Set Temp. Range: 5 -35
Dispaly Temp. Range: 5 ~ 99
Ambient Temp.: 0 ~ 45 ℃
Storage Temp.: -5 ~ 45 ℃
Timing Error: < 1%
Shell Material: PC +ABS ( Fireproof)
Wire Terminals: Wire 2 x 1.5 mm2 or 1 x 2.5 mm2
Current Load：
℃
℃
BEFORE WIRING AND INSTALLING
3. Installer must be a trained, experienced service technician.
CAUTION
Electrical Shock or Equipment Damage Hazard. Can shock
individuals or short equipment circuitry.
WIRING
INSTALLATION
Step 1. Keep power off. See Fig 1.
Fig 1
Step 3. Connect power supply, load into the appropriate terminals.
(see “Wiring your thermostat” for details and Fig 3).
the box. See Fig 4.
HOME SCREEN QUICK REFERENCE
During Power On
1. Power On/off: Press to turn the thermostat on/off.
2. Manual & Programmable
Touch (mode) to change between manual mode and programme
In programmable mode, the period icon will show on the right side.
could not be
adjusted.If the user want to change, please go to manual mode or
programmable mode.
In the mode of manual, press to set the desired temperature.
OPERATION
Touch the icon to set minute, hour and weekday (1 = Monday,
2 = Tuesday etc.) by using the arrows.
Press and hold the for 3 seconds to lock/unlock your thermostat
5. Locking your Thermostat
7. Checking the Temperature of Floor Sensor
Press and hold the arrow for 3 seconds to display the temp. of
floor sensor.
accept the program schedule made via the APP on your device (see
your thermostat (NOT via your smartphone/tablet) simply follow the
thermostat and smartphone/tablet.
emmargorpdnaedomlaunamneewtebegnahcothcuoT
In programme mode, touch and hold the icon until the weekday.
Press the icon
(1st period).
Repeat this process for periods 2, 3, 4 and 5 6.
Press the icon
Press once more to confirm and exit.
1 means Monday will show one by one on
the right side).
C
P S
as below:
20
6. Interated with Amazon Echo ,Google Home.
8. No limit to add rooms and support device sharing with family.
During Power Off
When power is off, press and hold
available
Then press to scroll through
BHT-001Series Round Thermostat
User Guide
Welcome
Thank you for your purchase.
Your new thermostat will provide uniform and comfortable
temperature control throughout every room in your property. We
bring together technology,
materials to provide you with a safe, reliable product combined with
sleek, contemporary design.
programming manual for comprehensive
thermostat. Please also
ensure a suitably qualified person installs your thermostat and
In the box you will find
Thermostat Screws
User Guide
1pc 2pc
1pc
QC Passed 1pc
Floor Sensor (2.5m) 1pc
MODEL DEFINITION
WIFI TYPE
90mm
Front
Side
Back
Unit: mm
14.0 25.5
60.0
50.3
50.3
Fig 3
Fig 2
Fig 4
Fig 5 Fig 6
the screen .
the screen .
Mon. Set
Temp.
Tue. Set
Temp.
Wed. Set
Temp.
Thu. Set
Temp.
Fri. Set
Temp.
Sat. Set
Temp.
Sun. Set
Temp.
06:00 20℃06:00 20℃06:00 20℃06:00 20℃06:00 20℃06:00 20℃06:00 20℃
08:00 15℃08:00 20℃08:00 20℃08:00 15℃08:00 15℃08:00 15℃08:00 15℃
11:30 15℃11:30 20℃11:30 20℃11:30 15℃11:30 15℃11:30 15℃11:30 15℃
13:30 15℃13:30 20℃13:30 20℃13:30 15℃13:30 15℃13:30 15℃13:30 15℃
17:00 22℃17:00 20℃17:00 20℃17:00 22℃17:00 22℃17:00 22℃17:00 22℃
22:00 15℃22:00 15℃22:00 15℃22:00 15℃22:00 15℃22:00 15℃22:00 15℃
5. 86mm hidden box and european 60mm round box is suitable.
6. White, black housing creates your colorful life.
2. Modern appearance leads to modern life.
3. Beau
2. 0.5°C Accuracy keeps temperature within the level you set.
3.
4. Data memory when power is off.
5. 7 days six periods programmable maximize comfort and economy.
Humidity sensor helps you know the humidity around you.
temperature.
other days’ .
Code Func on Se ng and op ons Default
1Temperature
Compensa on -9 to +9℃(for internal sensor) -2
2 Deadzone Temp. 0.5-4℃(for internal sensor) 1
3Display Mode 0：display both se emp. and room temp.
1：display se emp. only 00
4 Sensor Types
In：Internal Sensor（to control or limi he
temperature）
Ou: External Sensor（to control or limi he
temperature）
Al: Internal and External Sensor（Internal sensor to
control temperature, external sensor to limit
temperature）
Note: Please make sure the right sensor. If choose the
wrong or bad one, LCD will display Err.
AL
5Min. Set Temp. 5-15℃ 5
6Max. Set Temp. 15-45℃ 35
7Frost Protec on
On/off0: Off; 1: On 1
8Frost Protec on
se ng. 0-10℃5
9High Temperature
Protec on Se ng.
40-70℃
45
ABu ons Standby
Brightness 3 ~ 99 4
BBacklight Standby
Brightness 3 ~ 99 4
CDevice Status
when power on
0: Keep the power off.
1: Keep the status before power off1
D Deadzone Temp. 0.5-5 ℃(for external sensor) 1
Return to factory 0E
GC: Water/Gas Boiler, 5A
L: Backlight
P: Weekly Programmable
W: Wifi
S2: Both internal sensor and floor external sensor
For example: BHT-001 GCLW
5
88.0
88.0
5A（
AC 95~240V
IP20
NL
1234
M
Close Open 5
6
NTC
GA
L1 N1
LOAD
IP20
NL
1234
NTC
5
6
GB
IP20
NL
1234
5
6
NTC
GC
Dry Contact
A (RED)
Modbus
B (WHITE)
A (RED)
Modbus
B (WHITE)
A (RED)
Modbus
B(WHITE)
AC 95~240V
AC 95~240V
Room Temp.
Set Temp.
Wifi EZ Mode
Manual
Time Display
Power On/off
Floor Temp.
Mode
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
⑯
Lock
Clock
Up
Down
Period 1 to Period 6
Monday To Sunday
⑧
⑨
⑩
⑪
①
②
⑥
⑦
③
④
⑤
⑫⑬⑭
⑮
⑯
Temp. Display
17
PM AM
17
18
19
20
18
19
20
21
ON OFF
21
Wifi EZ Mode
Wifi AP Mode
ABOUT YOUR THERMOSTATS
The BHT-001 series range has been developed to control electric

Before using your Wi-Fi thermostat for the first time,you must
configure the Wi-Fi signal and settings through your smartphone
or tablet ,This will allow communication between your
connecteddevices
ABOUT WIFI
WI-FI CONNECTION
Step 1 Download your APP （Fig1-1）
Fig 1-1 Fig 1-2 IOS Fig 1-3 Android
Search for "Smartlife" in Apple Store or Google Play or use a
browser to scan the QR code above (Figure 1-2), and complete
account registration and installation according to the guidance
of the APP.
Step 2. Connect the thermostat
Check the tutorial below to complete the connection and setup.
Fig2.1 Fig2.2
Scan this QR code
Fig2.3
Network distribution mode:
1、 EZ Mode
When the thermostat is off, press
and hold the " "until the
thermostat screen flashes quickly
and displays the " " icon,
and then operate according to the
following figure (Fig 2.4-Fig 2.7).
Fig2.4
Fig2.5
Fig2.6
Fig2.7
2、AP Mode
When the thermostat is off, press and hold the " " until the
thermostat screen flashes slowly and the " " icon is displayed
(if the " " icon appears, continue to press the " " until the
thermostat screen Flashes slowly and displays the “ ” icon),
and then operate according to the following figure (Fig 2.8-Fig 2.14).
Fig2.8 Fig2.9
Fig2.10 Fig2.11
Fig2.12 Fig2.13
Fig2.14
After connecting to this hotspot,
return to the "smartlife" APP
APP operation interface description
(heating thermostat)）
More settings
Thermostat
name
More
Energy saving
Button lock
Target temp.
External sensor
temp.
Power
Room
temp.
Adjust
temp.
Programmable
mode
Manual
mode
Modify the name
of the thermostat
View the virtual ID
of the thermostat
Connect smart voice
audio guide
Share the thermostat
with your family
Group multiple
thermostats for
management
Fig2.3.1
Method 1: Scan the QR code to configure the network guide
(Fig 2.1-Fig 2.3)
Method 2: Ordinary distribution
network guidance
(Fig. 2. 1&Fig. 2.3.1)