Becker CentralControl CC51 Training manual

CentralControl
CC51
en Commissioning instructions
Central Controller
Important information for:
• Fitters / • Electricians / • Users
Please forward accordingly!
These instructions must be kept safe for future reference.
Becker-Antriebe GmbH
Friedrich-Ebert-Straße 2-4
35764 Sinn/Germany
www.becker-antriebe.com
4035 630 029 0a21/07/2017
4035 630 029 0a21/07/2017

Table of contents
General ................................................................................................................ 3
Warranty .............................................................................................................. 3
Items included ...................................................................................................... 4
Safety instructions ................................................................................................ 4
Intended use ........................................................................................................ 5
Dimensions .......................................................................................................... 6
Device overview .................................................................................................... 6
Online documentation ........................................................................................... 7
Mains connection ................................................................................................. 7
Start / standard screen.......................................................................................... 8
Commissioning, step-by-step ...............................................................................10
Selecting a language...................................................................................... 10
Network settings............................................................................................ 11
Date / time .................................................................................................... 13
Select weather location .................................................................................. 15
Programming receivers .................................................................................. 17
Creating rooms.............................................................................................. 20
Add receivers to rooms................................................................................... 22
Creating groups............................................................................................. 24
Program receivers for groups.......................................................................... 26
Operation............................................................................................................29
Operating receivers........................................................................................ 29
Tubular drive receivers .............................................................................. 29
Dimmer receiver ....................................................................................... 30
Switch receivers........................................................................................ 31
Operating groups........................................................................................... 31
Additional configuration and operation options .......................................................32
Installation...........................................................................................................33
Cleaning..............................................................................................................33
Technical data .....................................................................................................34
Simplified EU declaration of conformity..................................................................35
2

General
With the B-Tronic CentralControl you can operate the drives and control units with bid-
irectional KNX radio and the Centronic I and II range of controls.
This device uses free/open source software. The source code can be downloaded from
http://www.b-tronic.net/source/. On request, Becker Antriebe will make the source
code available on a CD-ROM at cost price. Please contact [email protected] if you
are interested.
As a result of continuous further development of the software, there can be differences
between the illustrations and your device.
This is not, however, important for any of the procedures described.
Please observe these Assembly and Operating Instructions when installing and setting
up the equipment.
Explanation of pictograms
CAUTION CAUTION indicates a hazardous situation
which, if not avoided, could result in injury.
ATTENTION ATTENTION indicates measures that must be
taken to avoid damage to property.
Denotes user tips and other useful information.
Warranty
Structural modifications and incorrect installation which are not in accordance with
these and our other instructions can result in serious injuries, e.g., crushing of limbs.
Therefore, structural modifications may only be carried out with our prior approval and
strictly in accordance with our instructions, particularly the information contained in
these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intended use is
not permitted.
The end product manufacturer and fitter have to ensure that all the relevant current
statutory, official and, in particular, EMC regulations are adhered to during utilisation of
our products, especially with regard to end product manufacture, installation and cus-
tomer advice.
3

Items included
•B-Tronic CentralControl controller
•USB WLAN stick
•USB Flash memory stick
•USB Centronic stick
•USB B-Tronic/KNX stick (optional)
•Mains adapter
•Fastening material for wall mounting.
•Documentation for commissioning
Safety instructions
General information
•Please keep the instructions safe!
•Only use in dry rooms.
•Keep people out of the system’s range of travel.
•Keep children away from control units.
•Observe all pertinent country-specific regulations.
•Do not place any objects on the control unit.
•Clean the control unit with a soft, dry, lint-free cloth, and do not use any chemical
cleaning agents.
Caution
•If the system is controlled by one or more transmitters, the system’s
range of travel must always be visible during operation.
•Keep packaging materials such as film away from children. Misuse
can create the risk of suffocation.
•Switch the control unit off immediately if the mains adapter and the
plug to which it is connected is burnt or damaged. If a mains adapter
is damaged, replace it with an original one. A faulty mains adapter
must not under any circumstances be repaired.
•Switch the control unit off immediately if the housing of the control
unit is damaged, or if liquids have penetrated.
4

Attention
•Do not let any objects fall onto the control unit.
•If a display is present, protect it against being scratched by hard ob-
jects (e.g. rings, fingernails, wristwatches)
•Wait until the control unit has adjusted to ambient temperature be-
fore connecting the control unit to the mains adapter. Condensation
that could lead to a short circuit can be caused inside the control unit
by large differences in temperature and air humidity.
Intended use
The B-Tronic CentralControl may only be used for the operation of suitable drives and
control units with bidirectional KNX radio and with the Centronic I and II range of con-
trols. You can operate a group, or multiple groups, of devices with this controller.
•Please note that radio-controlled systems may not be used in areas with a high risk
of interference (e.g. hospitals, airports).
•The remote control is intended solely for use with equipment and systems in which
malfunctions in the transmitter or receiver would not pose any risk to persons, an-
imals or property, or which contain safety devices to eliminate such risks.
•The operator is not protected from interference from other telecommunications
systems and terminal equipment (e.g. even from radio-controlled systems which
are properly operated in the same frequency range).
•Only connect radio receivers to devices and systems approved by the manufac-
turer.
•Ensure that the control unit is not installed or operated close to metal
surfaces or magnetic fields.
•Radio-controlled systems transmitting on the same frequency may
cause reception interference.
•Note that the range of the radio signal is limited by legislation as well
as by design.
5

Dimensions
All dimensions in mm.
156
197 32
Device overview
5
1
2
3
6
4
109
8
7
13 12 11
14
15
111213
14
16
17
10987
6

1. Integrated front camera
2. Light sensor
3. Loudspeaker
4. Touchscreen
5. Operating status LED
6. Microphone
7. USB backup memory
8. Free USB connector
9. Centronic stick
10. KNX stick
11. Connection for mains adapter
12. Headphone output (3.5 mm jack)
13. WLAN stick
14. Network connection (RJ45)
15. Reset button
16. Cover
17. Feet
Online documentation
In addition to the present commissioning instructions, we make comprehensive docu-
mentation available to you online.
Please visit the following Internet site:
http://www.becker-antriebe.net/centralcontrol/.
Mains connection
1. If necessary, pull the cover off the control unit.
2. First connect the mains adapter to the control unit, then plug it into the socket.
3. If you removed the cover, place it back onto the control unit now.
7

Start / standard screen
1
3
2
4
65
1 Main screen area
The time and date, and in some cases the weather forecast, are displayed on the main
screen area.
2 Navigation and status area
The current weather, status information, and the navigation elements for the pro-
grammed receivers are shown in the navigation and status area.
3 Time / date
Display of date and time. The time can be displayed in digital or analogue format.
4 Weather
Display of the current weather at the selected weather location. Displaying the
weather data requires an Internet connection.
5 Device status bar
The statuses of various device-specific functions are displayed on this status bar:
B-Tronic KNX stick is available in the device.
B-Tronic KNX stick is not available in the device.
Centronic RF stick is available in the device.
Centronic RF stick is not available in the device.
WLAN signal strength
No WLAN available
8

Network via cable
No network via cable
Access point available
Fault indication
An update is available
The display of blue triangles indicates that more content is available in the
main screen area by scrolling up or down.
6 Main navigation
The main navigation is visible, with an identical format, on all the screens. It consists
of the following three navigation panes:
Clicking this button will always take you back to the start screen.
Clicking this button takes you to the operating facilities for the receivers,
rooms, groups and scenarios.
Clicking this button will take you to the settings.
9

Commissioning, step-by-step
•Selecting a language [}10]
•Network settings [}11]
•Date / time [}13]
•Select weather location [}15]
•Programming receivers [}17]
•Creating rooms [}20]
•Add receivers to rooms [}22]
•Creating groups [}24]
•Program receivers for groups [}26]
Selecting a language
1 Please press the "Programs and set-
tings" button.
1
2 On the "Programs and settings" screen
you should now select the "Configuration"
menu item.
Radio
Cameras
House installation
Settings
Configuration
Select an
application
2
System information
10

3 Now select "Selecting a language" in
the configuration menu.
Select weather location
Date / time
Network settings
Configuration
Selecting a language
Please select the
desired menu item
3
Screen settings
4 Choose the language you want in the
language menu.
Language
Deutsch
Please select
your
language
English
Francais
Nederlands
4
5
Italiano
5 You confirm your input and close the
menu with the green tick.
Network settings
The full home automation functionality of the B-Tronic CentralControl is available even
when it is not connected to a network. However, some additional functions and access
options are only possible with network or Internet access.
In order to be able to use these functions, make sure that the B-Tronic CentralControl is
connected to your network, that there is an Internet connection, and that the time is set
correctly. Do remember that this may result in charges, depending on the contractual
conditions of your Internet supplier.
1 Please press the "Programs and set-
tings" button.
1
11

2 On the "Programs and settings" screen
you should now select the "Configuration"
menu item.
Radio
Cameras
House installation
Settings
Configuration
Select an
application
2
System information
3 Now select "Network settings" in the
configuration menu.
Select weather location
Date / time
Network settings
Configuration
Selecting a language
Please select the
desired menu item
3
Screen settings
4 You can change the name of the B-
Tronic CentralControl here.
Network
Network
configuration
Ethernet
Interface
5
WiFi
WiFi access data
SSID / network name
6
Host name
4
beckernet
CentralControl
Activate access point
5 Selection for access point (configura-
tion WLAN of the B-Tronic CentralControl.
Only available on the CC31) Ethernet
(wired network installation) or WiFi
(WLAN / radio network installation).
6 SSID = network identifier
(this is only needed for WiFi / WLAN con-
nections)
You will only be able to select the net-
works flagged with a green symbol.
Network
Manual input
Select
network
12

7 Key = password
(this is only needed for WiFi / WLAN con-
nections)
Please note that the central control can
only be linked into a network by means of
WiFi / WLAN if the WPA2 encryption is
switched on at the router.
An automatic DHCP is usually activated in
private networks. If this is not the case,
please ask your network administrator for
the entries required for the fields 9, 10,
11 and 12.
To ensure that a different IP address
is not used every time the CentralCon-
trol reboots, a fixed IP address should
be assigned to the CentralControl.
(Select 8 = Manual, and input the in-
formation needed for the fields 9, 10,
11 and 12).
After configuration has been finished,
some of the data can also be seen under
"System information".
13 If you are unable to establish a con-
nection to your WLAN network using the
standard WLAN driver you should test the
alternative WLAN driver. Only available on
the CC51.
14 You confirm your input and close the
menu with the green tick.
Network configuration
Key / password (PSK)
Automatic (DHCP)
Manual
IP address
Net mask
Gateway
Name server
7
8
9
10
11
12
14
WLAN driver version
Modification requires restart
Standard
Alternative 13
Date / time
1 Please press the "Programs and set-
tings" button.
1
13

2 On the "Programs and settings" screen
you should now select the "Configuration"
menu item.
Radio
Cameras
House installation
Settings
Configuration
Select an
application
2
System information
3 Now select "Date / time" in the config-
uration menu.
Select weather location
Date / time
Network settings
Configuration
Selecting a language
Please select the
desired menu item
3
Screen settings
4 Now please choose whether you want
the time to be obtained automatically from
the Internet, or whether you want to set it
manually.
The central controller needs an Internet
connection if it is to obtain the time and
date information automatically.
Date / time
Settings
4
automatic (NTP)
Time
5
6
7
Time
manual
Date
Time format
Date format
Time zone
Berlin
8
9
10
5 Setting the time manually.
This menu item is omitted if "Automatic" is
selected under Point 4.
6 Setting the date manually.
This menu item is omitted if "Automatic" is
selected under Point 4.
7 Setting the format in which the time will
be displayed.
8 Setting the format in which the date will
be displayed.
9 Setting the time zone.
10 You confirm your input and close the
menu with the green tick.
14

Select weather location
Displaying the weather data requires an Internet connection.
In order to be able to display the correct weather data on your B-Tronic CentralControl
it is necessary to provide the location for which the weather data is to be displayed.
If the place you want is not available in the selection list, choose the nearest larger city.
1 Please press the "Programs and set-
tings" button.
1
2 On the "Programs and settings" screen
you should now select the "Configuration"
menu item.
Radio
Cameras
House installation
Settings
Configuration
Select an
application
2
System information
3 Now select "Select weather location" in
the configuration menu.
Select weather location
Date / time
Network settings
Configuration
Selecting a language
Please select the
desired menu item
3
Screen settings
15

4 The location that is currently set for the
weather data is shown on the display.
Weather
Location:
Location for weather
information
4
Sinn, Germany 5
Set using location data
Options
5 To change the location, click the field
where the name is displayed.
6 Now enter the location that you want.
Please make sure that you don't use any
special national characters.
For example:
- München should be written Muenchen
- Orléans should be written Orleans
Search locations
Paris
Please enter your location
6
7
7 Confirm your input by clicking the green
tick.
8 If your entry results in more than one hit,
a selection list of possible locations will be
displayed.
Select the location you want.
To execute Astro functions the loca-
tion of the CentralControl must be
entered correctly. This can be spe-
cified in the Select location menu.
Locations found
Select your
location
8
9
9 You confirm your input and close the
menu with the green tick.
10 Alternatively, you can also choose your
current location as the weather location.
To do this, simply click the "Set using loc-
ation data" button.
Weather
Location:
Location for weather
information
Paris
Set using location data
Options
11
10
11 Confirm your input by clicking the
green tick.
16

12 After the central controller has entered
the weather location according to your
specifications, the screen returns auto-
matically to the previous menu.
Select weather location
Date / time
Network settings Configuration
Please select the
desired menu item
12
Location
Programming receivers
1 Please press the "Programs and set-
tings" button.
1
2 On the "Programs and settings" screen
you should now select the "House install-
ation" menu item.
Radio
Cameras
House installation
Settings
Configuration
Select an
application
2
System information
3 On the "House installation" screen you
should now select the "Receivers" menu
item.
Rooms
Scenarios
Groups
Setup
Receiver
Please select
a function
3
Timers
17

4 Select the [ + ] button in order to add a
receiver.
Receiver
installation
Add / select
receiver
4
Drive Centronic
Dimmer KNX
Socket switch KNX
Switch KNX
A name is first assigned to a new receiver.
Do please make sure that you name the
receivers in a meaningful way, so that
when they have all been added they can
be distributed around the rooms accord-
ing to their names.
5 Tap the name field.
Receiver name:
Receiver type:
Device type:
Tubular drive / ext.
Switching actuator
Add
receiver
Configure
settings
Dimming actuator
Centronic
B-Tronic / KNX-RF
5
Awning
Blind
Screen
Shade sail
Awning heater
Door
Door (impulse)
Heating actuator
6 The keyboard opens. Enter the name of
the new receiver here.
The name "Receiver" has been used in
the example.
New
receiver
Please enter
a name
7
Receiver 6
7 You confirm your input and close the
keyboard with the green tick.
18

8 Selecting the receiver type.
Two options are available:
- B-Tronic / KNX (bidirectional - with con-
firmation function)
- Centronic (unidirectional - without con-
firmation function)
Only certain device types are available for
selection, depending on the selected re-
ceiver type.
8
9
Receiver
10
Receiver name:
Receiver type:
Device type:
Tubular drive / ext.
Switching actuator
Add
receiver
Configure
settings
Dimming actuator
Centronic
B-Tronic / KNX-RF
Awning
Blind
Screen
Shade sail
Awning heater
Door
Door (impulse)
Heating actuator
9 Selecting the device type.
Several options are available:
For device types "Door" and "Door (im-
pulse)", please note the following:
Depending on the functions available on
the door drive being programmed, "Door"
must be selected for door control units
with defined UP/STOP/DOWN commands
and Door (impulse) for door control units
with impulse sequences (UP/STOP/
DOWN/STOP etc.).
10 You confirm your input and move on to
the next screen with the green tick.
11 The receiver must now be made ready
for programming.
B-Tronic / KNX devices:
Please find the procedure for the receiver
in the operating instructions for the device
that is to be programmed.
Centronic devices:
A Centronic receiver can only be pro-
grammed when it is put into programming
mode by its master transmitter. Here
again you can find the exact procedure in
the operating instructions for the particu-
lar receiver.
Put the receiver into
programming mode now!
Programming mode
active?
Add
receiver
11 12
12 You confirm your input and move on to
the next screen with the green tick.
19

13 In addition to the information on the
screen saying that the programming has
been completed successfully, many re-
ceivers also confirm correct program-
ming. This is often done by "clicking" at
motors, or by flashing the status LED at
the receiver. The manual for the receiver
concerned will tell you whether the re-
ceiver you are programming provides
confirmation, and if so, how.
The receiver has been
successfully programmed
and can now be added
to groups or rooms.
Program
13 14
B-Tronic / KNX-RF
14 You confirm your input and close the
menu with the green tick.
You can now test the drive by operating it
with the following buttons.
A UP button
B STOP button
C DOWN button
Testen
B-Tronic / KNX-RF
A
15
B
C
15 You close the test menu with the green
tick.
16 The new receiver can now be seen in
the receiver selection menu.
Receiver
installation
Add / select
receiver
16
Receiver
Drive Centronic
Switch KNX
Dimmer KNX
Creating rooms
1 Please press the "Programs and set-
tings" button.
1
20