1
Technical Aspects of your machine
Cord Windins System
Control Button (pulse-0-I-II)
Motor Housing
Washable Blade Assembly
Plastic Container Jug
Max. Capacity : 1500 ml.
Lid
Small Lid
2
3
4
5
6
7
Voltage / Frequency : 220-240V~ 50/60 Hz
Isolation Class
:
Motor Isalation Class : B
Power : 600 W max.
Using your machine
How to Use:
Before first use, wash the Jar Assembly
in warm sudsy water, rinse and dry
well.Blending is a very fast process.The
motor drives the cutter at high speed
to ensure that through blending is
achieved.Make sure that whenever you
use blender it is standing on a flat,
clean, dry surface.Before starting to
blend check that the jar assembly is
firmly in place on the motor base.
Operation:
With the motor unit resting on a flat dry
surface and jar assembly firmly sitting
in place, put the foods to be
blended into the jar.
Please note that the jar should be locked
on to the main unit by holding the
washable blade assembly not the jar
handle.
Use the measuring scale on the jar as
a guide and, to avoid having the food
overflow, restrict the quantity
to no more than 1500 ml. at any one
time.Place lid and lid insert on jar
assembly.
Attention
Do not operate the appliance
continiously more than 30 seconds.
Do not operate the appliance when
empty.
Ensure the blender is switched OFF
"O" and plug power cord into a power
outlet.Turn blender switch to either
setting for a few seconds. Switch OFF
"O" and check the food. Blending is a
fast process.Take care not to over blend.
Use the PULSE setting for greater
control in short blending jobs.Switch
must be held in PULSE position for
blender to run. Blender will stop as soon
as switch is released. Use the PULSE
setting to prevent over blending of foods.
If you wish to add ingredients whilst
blending, liquids can be added through
the hole in the lid insert, or the lid insert
can be removed to allow dry foods to
be added through the larger hole. DO
NOT operate the blender without the
lid and lid insert in place.
All declared values on the product and on the printed
leaflets are picked up after laboratory measurements
performed according to related standarts. These values
may differ upon usage and ambient conditions.
3 4
1
2
3
4
5
7
6
Figure 1 Figure 2
How to Use:
Before first use, wash the Jar Assembly
in warm sudsy water, rinse and dry
well.Blending is a very fast process.The
motor drives the cutter at high speed
to ensure that through blending is
achieved.Make sure that whenever you
use blender it is standing on a flat,
clean, dry surface.Before starting to
blend check that the jar assembly is
firmly in place on the motor base.
Operation:
With the motor unit resting on a flat dry
surface and jar assembly firmly sitting
in place, put the foods to be
blended into the jar.
Please note that the jar should be locked
on to the main unit by holding the
washable blade assembly not the jar
handle.
Use the measuring scale on the jar as
a guide and, to avoid having the food
overflow, restrict the quantity
to no more than 1500 ml. at any one
time.Place lid and lid insert on jar
assembly.
Attention
Do not operate the appliance
continiously more than 30 seconds.
Do not operate the appliance when
empty.
Ensure the blender is switched OFF
"O" and plug power cord into a power
outlet.Turn blender switch to either
setting for a few seconds. Switch OFF
"O" and check the food. Blending is a
fast process.Take care not to over blend.
Use the PULSE setting for greater
control in short blending jobs.Switch
must be held in PULSE position for
blender to run. Blender will stop as soon
as switch is released. Use the PULSE
setting to prevent over blending of foods.
If you wish to add ingredients whilst
blending, liquids can be added through
the hole in the lid insert, or the lid insert
can be removed to allow dry foods to
be added through the larger hole. DO
NOT operate the blender without the
lid and lid insert in place.
How to Use:
Before first use, wash the Jar Assembly
in warm sudsy water, rinse and dry
well.Blending is a very fast process.The
motor drives the cutter at high speed
to ensure that through blending is
achieved.Make sure that whenever you
use blender it is standing on a flat,
clean, dry surface.Before starting to
blend check that the jar assembly is
firmly in place on the motor base.
Operation:
With the motor unit resting on a flat dry
surface and jar assembly firmly sitting
in place, put the foods to be
blended into the jar.
Please note that the jar should be locked
on to the main unit by holding the
washable blade assembly not the jar
handle.
Use the measuring scale on the jar as
a guide and, to avoid having the food
overflow, restrict the quantity
to no more than 1500 ml. at any one
time.Place lid and lid insert on jar
assembly.
Attention
Do not operate the appliance
continiously more than 30 seconds.
Do not operate the appliance when
empty.
Ensure the blender is switched OFF
"O" and plug power cord into a power
outlet.Turn blender switch to either
setting for a few seconds. Switch OFF
"O" and check the food. Blending is a
fast process.Take care not to over blend.
Use the PULSE setting for greater
control in short blending jobs.Switch
must be held in PULSE position for
blender to run. Blender will stop as soon
as switch is released. Use the PULSE
setting to prevent over blending of foods.
If you wish to add ingredients whilst
blending, liquids can be added through
the hole in the lid insert, or the lid insert
can be removed to allow dry foods to
be added through the larger hole. DO
NOT operate the blender without the
lid and lid insert in place.
Figure 3 Figure 4
Figure 5
How to Use:
Before first use, wash the Jar Assembly
in warm sudsy water, rinse and dry
well.Blending is a very fast process.The
motor drives the cutter at high speed
to ensure that through blending is
achieved.Make sure that whenever you
use blender it is standing on a flat,
clean, dry surface.Before starting to
blend check that the jar assembly is
firmly in place on the motor base.
Operation:
With the motor unit resting on a flat dry
surface and jar assembly firmly sitting
in place, put the foods to be
blended into the jar.
Please note that the jar should be locked
on to the main unit by holding the
washable blade assembly not the jar
handle.
Use the measuring scale on the jar as
a guide and, to avoid having the food
overflow, restrict the quantity
to no more than 1500 ml. at any one
time.Place lid and lid insert on jar
assembly.
Attention
Do not operate the appliance
continiously more than 30 seconds.
Do not operate the appliance when
empty.
Ensure the blender is switched OFF
"O" and plug power cord into a power
outlet.Turn blender switch to either
setting for a few seconds. Switch OFF
"O" and check the food. Blending is a
fast process.Take care not to over blend.
Use the PULSE setting for greater
control in short blending jobs.Switch
must be held in PULSE position for
blender to run. Blender will stop as soon
as switch is released. Use the PULSE
setting to prevent over blending of foods.
If you wish to add ingredients whilst
blending, liquids can be added through
the hole in the lid insert, or the lid insert
can be removed to allow dry foods to
be added through the larger hole. DO
NOT operate the blender without the
lid and lid insert in place.
