Inspection and maintenance
Service-Unit BEKOMAT® 31U / 31U F 7
Pos: 20 /B eko T echnis che Do kument ati on/Über schr iften/ 1/K ontroll e und War tung @ 0\mod_1183637885371_2901.docx@ 5439 @ 1 @ 1
4 Inspection and maintenance
Pos: 21 /Be ko T echni sc he D ok ume ntati on /Sic her hei t/Gef a hr Dr uckl uf t @ 0 \mod_1184148143854_2901.docx@ 5778@ @ 1
Danger!
Compressed air!
Risk of serious injury or death through contact with quickly or suddenly escaping
compressed air or through bursting plant components or plant components which are
not secured.
Pos: 22 /B eko T ec hnis ch e Do ku ment ati on/Si cher hei t/M aß nah men D ru cklu ft BM @ 0\mod_1184148284291_2901.docx@ 5814@ @ 1
Measures:
• Do not exceed the maximum operating pressure (see type plate).
• Only carry out service measures when the system is pressureless.
• Use pressure-resistant installation material only.
• The feed pipe must be tubed firmly. Discharge pipe: short, fixed pressure hose onto pressure-resistant
pipe.
• Make sure that persons or objects cannot be hit by condensate or escaping compressed air.
Pos: 23 /B eko T ec hnis ch e Do ku ment ati on/Si cher hei t/G ef ahrNetzspannung1 s/w @ 0\mod_1184148186948_2901.docx@ 5796@ @ 1
Danger!
Supply voltage!
There is the risk of an electric shock involving injury or death when coming into contact
with non-insulated components carrying supply voltage.
Pos: 24 /B eko T ec hnis ch e Do ku ment ati on/Si cher hei t/M aß nah men N etz sp annu ng B M 31U /3 2U/ 33U @ 7\mod_1390467197804_2901.docx@ 38043@ @ 1
Measures:
• During electric installations, all regulations in force need to be adhered to (e.g. VDE 0100 / IEC 60364).
• When the control unit is open, service and installation works must only be undertaken when the
system is deactivated.
• The removed control unit has no IP degree of protection.
• All types of electrical works must be carried out by authorised and qualified personnel only.
Pos: 25 /B eko T ec hnis ch e Do ku ment ati on/Si cher hei t/V ors ic ht Fe hlfu nk tio n @ 0 \mod_1214378096290_2901.docx@ 9360@ @ 1
Caution!
Malfunction during operation!
Through incorrect installation and poor maintenance, malfunction may occur at the
BEKOMAT®.
Condensate which is not discharged may cause damage to plants and in production
processes.
Pos: 26 /B eko T ec hnis ch e Do ku ment ati on/Si cher hei t/M aß nah men F ehl fu nkti one n BM @ 0\mod_1214378434025_2901.docx@ 9379 @ @ 1
r
Measures:
• Condensate drainage which is reliable in performance directly optimises the compressed-air quality.
• To prevent damage and breakdowns, it is imperative to observe the following:
• Exact compliance with the specifications of use and with the performance parameters of
the BEKOMAT®, in connection with the case of application (see "Proper use" section)
• Exact compliance with the installation- and operation instructions in this manual
• Regular maintenance and control of the BEKOMAT®in accordance with the instructions in this
operating manual
Pos: 27 /B eko T echnis che Do kument ati on/Sic herhei t/Hin weis V orschr ifte n Werkze ug Rei nigung K onde nsat En tsorg ung @ 0\mod_1233239666823_2901.docx@ 13340@ @ 1
