Belair SHELL User manual

DESK SHELL
1
DISCLAIMER
• Two people are recommended for the assembly of this product.
• Use hardware provided and tools recommended to avoid any product faults.
• Always assemble product on a clean soft surface to avoid scratching.
PARTS INCLUDED
HARDWARE INCLUDED
TOOLS REQUIRED
12X 12X 12X
#2 Phillips screwdriver
ASSEMBLY INSTRUCTIONS
ABD
C
If desk has a data modesty back,
then extra brackets are required
2X 8X

DESK SHELL
2
STEP 1
Lay top A upside down to start.
Connect gable D to top as shown.
Tighten all hardware except for cam
closest to back connection.
STEP 1
Attach back B . Fasten all pins and
cams connected to gable.
STEP 3
Attach second gable C . Ensure all
hardware are tighten before ipping
unit right side up. Cover any visible
cams with cover caps.
A
D
B
C

DESK SHELL
3
STEP 4
If desk back is a 10” data modesty, then L
brackets with screws will be provided to
add extra stability to the desk. Attach one L
bracket to both sides of the back to ends.