Belair W-01S User manual

W-01S
1
DISCLAIMER
• Two people are recommended for the assembly of this product.
• Use hardware provided and tools recommended to avoid any product faults.
• Always assemble product on a clean soft surface to avoid scratching.
PARTS INCLUDED
HARDWARE INCLUDED
TOOLS REQUIRED
22X 22X 20X 4X 1X
#2 Phillips screwdriver #2 Robertson
ASSEMBLY INSTRUCTIONS
A B C D E
F
G

W-01S
2
STEP 1
Connect desk top A and right gable B
as shown. Fasten pins and cams.
STEP 2
Lay back D flat and lower top and gable
onto back. Do not fasten pins and cams
until next step.
STEP 3
Attach left gable C . Fasten all pins and
cams and lift unit right side up.
A
B
C
D

W-01S
3
STEP 4
Assemble transaction top E . Fasten
pins and cams.
STEP 5
Assemble waterfall top F and back G as
shown. Fasten pins and cams.
STEP 6
Position waterfall on center of
transaction top. Secure waterfall with
screws through back of unit as shown.
Use cover caps to cover any visible
cams and screws.
G
F
E