Belair W-04S User manual

W-04S
1
DISCLAIMER
• Two people are recommended for the assembly of this product.
• Use hardware provided and tools recommended to avoid any product faults.
• Always assemble product on a clean soft surface to avoid scratching.
PARTS INCLUDED
HARDWARE INCLUDED
TOOLS REQUIRED
38X 38X 34X 4X 2X
#2 Phillips screwdriver #2 Robertson screwdriver
ASSEMBLY INSTRUCTIONS
A B C D
E
F
G H
I

W-04S
2
STEP 1
Ensure all hardware are inserted into
parts before assembling. Attach top A
and left gable C as shown. Fasten pins
and cams.
STEP 2
Lay back B flat and lower top and left
gable onto back. Do not fasten pins and
cams until next step.
STEP 3
Attach right gable D as shown. Fasten
all pins and cams. Flip unit right side up.
A
C
B
D

W-04S
3
STEP 4
Attach transaction top E as shown.
Fasten pins and cams.
STEP 5
Lay waterfall back G flat and attach
large waterfall end H . Fasten pins and
cams. Depending on desired layout
waterfall unit can be configured as a left
or right unit. For a left waterfall follow
diagram as shown.
STEP 6
Attach small support I pieces as
shown. Fasten pins and cams.
E
G
H
I
I
I

W-04S
4
STEP 7
Attach waterfall top F . Fasten pins and
cams.
STEP 8
Position waterfall on desk and secure
through desk back with screws
provided.
STEP
Insert grommet covers in desk top and
use cover caps to cover any visible
cams and screws.
F