Belkin OmniView F1DK102P User manual

Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: [phone]
Fax: [phone]
Belkin Components, Ltd.
Express Business Park • Shipton Way • Rushden
NN10 6GL • United Kingdom
Tel: [phone]
Fax: [phone]
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: [phone]
Fax: [phone]
Belkin, Ltd.
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: [phone]
Fax: [phone]
Belkin Tech Support
US: 310.898.1100 ext. 2263
800.223.5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
P74242
© 2003 Belkin Corporation. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed.

2-Port KVM Switch with
Built-In Cabling
User Manual
F1DK102P
Control two computers using one video monitor, and a
PS/2 keyboard and mouse

Introduction
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Overview
Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Unit Display Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installation
Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Step-By-Step Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Using Your Switch
Powering Up the Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
AutoScan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
TABLE OF CONTENTS

Congratulations on your purchase of this Belkin 2-Port KVM Switch with Built-In
Cabling (the Switch). The diverse line of market-leading KVM solutions from Belkin
exemplifies our commitment to delivering high-quality, durable products at a
competitive price. Engineered to give you control over multiple computers and/or
servers from one console, Belkin KVM switches come in a variety of capacities
suitable for all configurations, large or small. This Switch is backed by a Belkin
Three-Year Warranty and free technical support.
This manual will provide you details about your new Switch, from installation
and operation, to troubleshooting—in the unlikely event of a problem.
For easy installation, please refer to the Quick Installation Guide included with
your Switch.
Thank you for purchasing the Belkin 2-Port KVM Switch with Built-In Cabling. We
appreciate your business.
Package Contents
•2-Port KVM Switch with Built-In Cabling
•User Manual
•Quick Installation Guide
•Registration Card
INTRODUCTION
1

The Belkin 2-Port KVM Switch with Built-In Cabling allows you to control multiple
computers with one keyboard, monitor, and mouse. The Switch supports PS/2 input
devices (keyboard and mouse), VGA, SVGA, XGA, and PS/2 computers.
Feature Overview
Complete Compact Solution
Built-in cables and color-coded connectors make operation and organization easy.
Hot Keys
Hot keys allow you to select ports using designated key commands. Control multiple
computers using a simple hot key sequence on your keyboard.
AutoScan
The AutoScan feature allows you to automatically scan and monitor the activities
of all operating computers connected to your Switch one by one.
Video Resolution
The Switch is able to support video resolutions of up to 2048x1536@65Hz. To
preserve signal integrity at high resolutions, 75-Ohm coaxial VGA cabling is
built-in to your Switch.
Light-Emitting Diode Display
LEDs on the top of the Switch function as status monitors. The LEDs light to
indicate which corresponding monitor port is currently active.
OVERVIEW
2

Operating Systems
Your Switch is for use on CPUs using:
Platforms
• Windows® 95, 98, 2000, Me, NT®, XP
• DOS
• Linux®
• Novell® NetWare® 4.x/5.x
Keyboards
• Supports 101-, 102-, and 104-key keyboards
Mice
• Microsoft® system-compatible PS/2 mice with 2, 3, 4, or 5 buttons
Monitors
• VGA
• SVGA
• MultiSync®
OVERVIEW
3

4
OVERVIEW
Port Status
Indicator LEDs
The 2-Port KVM Switch with Built-In Cabling:
Console
Mouse Port
Unit Display Diagram
Built-In Cables
Console
Keyboard Port
Console VGA
Monitor Ports

Specifications
Part No.: F1DK102P
PCs Supported: 2
Keyboard Emulation: PS/2
Mouse Emulation: PS/2
Monitors Supported: VGA, SVGA, MultiSync, and LCD (with use of adapter cable)
Max. Resolution: 2048x1536@65Hz
Keyboard Input: 6-pin miniDIN (PS/2)
Mouse Input: 6-pin miniDIN (PS/2)
VGA Port: 15-pin HDDB type
LED Indicators: 2
Enclosure: Plastic
Dimensions: (H) 27.5 x (W) 82 x (D) 81.25mm
Weight: 1.3 lbs.
Operating Temp: 32° to 104° F (0° to 40° C)
Storage Temp: -4° to 140° F (-20° to 60° C)
Humidity: 0-80% RH, non-condensing
Warranty: 3 years
NOTE: Specifications are subject to change without notice.
5
OVERVIEW

6
Pre-Configuration
Where to Place the Switch
The Switch is designed for positioning on the desktop. The exact placement will
be based on the location of your CPUs and length of your cables.
Cable Distance Requirements
For PS/2 computers: VGA signals are best retained when transmitted up to eight
feet. Beyond eight feet, probability of video degradation increases with an
increase in distance. For this reason, your PS/2 computer should be placed
within eight feet of the KVM Switch.
Note: If your computer needs to be more than eight feet from the KVM Switch, you
can use the Belkin CAT5 Extender (part number F1D084) to extend your PS/2
keyboard, PS/2 mouse, and monitor up to 500 feet (152.4m) away using a
standard CAT5 UTP cable.
Cautions and Warnings
Avoid placing cables near fluorescent lights, air conditioning equipment, or
machines that create electrical noise (e.g., vacuum cleaners).
INSTALLATION

Step-by-Step Installation Guide
This section provides complete instructions for the hardware setup of a
single Switch.
Important Note
Before attempting to connect anything to the Switch or to any computer, make
sure that everything is powered off. Plugging and unplugging cables while
computers are powered on can cause irreversible damage to your computers,
data, and/or to the Switch. Belkin Corporation will not be responsible for damage
caused in this way.
Connecting the Console
1. Power down all computers.
2. Connect your PS/2-type keyboard
and mouse to the KEYBOARD and
MOUSE ports located on the front
panel of your Switch.
3. Take the VGA cable that is
attached to your monitor and
connect it to the VGA port on the
front panel of the Switch.
7
INSTALLATIONINSTALLATION