Berlin Gardens PCTS6000 Firmware update

Assembly Directions for Swings
#PLTS4800, #PLTS6000, #PCTS4800, # PCTS6000, #PZTS4800, # PZTS6000
HARDWARE PACKAGE
2 " x 3½" Allen Head Bolts
2 " x 4" Allen Head Bolts
2 ¼" x 4½" Allen Head Bolts
2 ¼" x 3" Allen Head Bolts
4 " Flange Nuts
8" Washers
4 " Lock Nuts
3 ¼" Flange Nuts
2 " x 2 ½" Eye Screws
4 " Acorn Nuts
1Allen Wrench
PACKAGE CONTENTS
1 Back
1 Seat
2 Arms
1 Hardware Package
TOOLS NEEDED:
Hammer
" Wrench
½" Wrench
Allen Wrench (Included)
Firmly tap bolts into pre-drilled
holes before tightening.
CORRECT INCORRECT
1 2 34 5
Use to measure bolts
Casual-Back
Comfo-Back
Cozi-Back
Right Arm
Assembly Left Arm
Assembly
" x 4" Allen Head Bolt
" x 3½" Allen Head Bolt
¼" x 4½" Allen Head Bolt
¼" x 3" Allen Head Bolt
STEP #1 - Attach the Arm Assembly to the Seat and Back
using a " x 4" Allen Head Bolt at the seat, a
" x 3½" Allen Head Bolt at the Arm and a
¼" x 4½" Allen Head Bolt connecting the Arm
Assembly to the Seat and Back. Attach middle
back support to seat support using (1) ¼"x3"
Allen Head Bolt (Note: for 3 seat swings, 2
bolts are required).
Seat Slat
Back Slat
Please note: See diagram for direction of bolt.

STEP #2 - Repeat Step 1.
STEP #3 - Install the two Eye Screws into the pre-drilled
holes (see Diagram C). Attach the chain to the
Allen Head Bolts using Washers and Lock Nuts
(see Diagrams A and B).
STEP #4 - Repeat Step 3.
¼" x 4½" Allen Head Bolt
" x 4" Allen Head Bolts
" x 4" Allen Head Bolts
Diagram B
Diagram C
Diagram A
Diagram A
" x 3½" Allen Head Bolts
" x 3½" Allen Head Bolts
Diagram C
Diagram B
Diagram A Diagram B Diagram C
(2) ⁄" Washers
⁄"
Lock Nut
Eye Screw
⁄"
Lock Nut
(2) ⁄" Washers
⁄" x 3½"
Allen Head
Bolt to
attach arm
to back and
secure chain
⁄"
Flange
Nut
⁄" x 4"
Allen
Head Bolt
⁄"
Flange
Nut