Berlin Gardens PZTG4800 Firmware update

FM - 28
STEP #2 - Turn the Chair on the other side and
repeat Step 1. ⁄" x 2½" Carriage Bolts
STEP #1 - Fasten the Leg Assembly to the
Seat and Back using Carriage Bolts.
Install 2- " x 2½" Carriage Bolts
in the pre-drilled holes (see Glider
Bracket Diagram).
Assembly Directions for Gliders
#PLTG2400, #PLTG4800, #PLTG6000, #PCTG2400, #PCTG4800, #PZTG2400, #PZTG4800
HARdWARE PACKAGE
2 ¼" x 4½" Carriage Bolts
2 ¼" x 3½" Carriage Bolts
6 ¼" x 3" Carriage Bolts
8 ¼" x 2" Carriage Bolts
8 " x 2½" Carriage Bolts
8 " Lock Nuts
8 " Flange Nuts
18 ¼" Flange Nuts
4 " Acorn Nuts
4 Glider Brackets
PACKAGE CONTENTs
2 Bases
1 Back
1 Seat
1 Hardware Package
2 Arms with Legs
2 Cross Supports
4 Stops
1 Glider Bracket Package
TOOls NEEdEd:
Hammer
" Wrench
½" Wrench
Firmlytapboltsintopre-drilled
holesbeforetightening.
CORRECT INCORRECT
1 2 34 5
Use to measure bolts
⁄" x 2½" Carriage Bolts
¼" x 3" Carriage Bolts
¼" x 3"
Carriage Bolts
¼" x 4½" Carriage Bolts
¼" x 4½" Carriage Bolts
¼" x 3½" Carriage Bolts ¼" x 3½" Carriage Bolts
Top Board
Arm
Seat Slat
Cross Support
Leg
Base
Back Slat
Arm Slat
Back Support
Seat
Support
Single Comfo-Back Glider Single Cozi-Back Glider
Single Casual-Back Glider
www.Poly-Lumber-Furniture.com
1-877-904-1234

FM - 29
STEP #1 -
STEP #3 -
STEP #2 - Attach the four Glider Stops to the Base
using ¼" x 3" Carriage Bolts.
STEP #4 - Set the Chair on top of the Base. Attach
the Leg of the Chair onto the Glider
Bracket using " Lock Nuts to secure the
Glider Brackets.
Assembly Directions for Glider Base
Firmlytapboltsintopre-drilled
holesbeforetightening.
CORRECT INCORRECT
1 2 34 5
Use to measure bolts
¼" x 2" Carriage Bolts ¼" x 3" Carriage Bolts
5⁄16" x 2½"
Carriage
Bolts
5⁄16"
Flange
Nut
Lock
Nut
Glider Bracket Diagram
Fasten the two
Cross Supports to
the Base using ¼" x
2" Carriage Bolts.
Install the 4- "
x 2½" Carriage
Bolts into the pre-
drilled holes and
tighten with "
Flange Nuts.
Place the Glider
Brackets onto
the Carriage Bolt
and use " Lock
Nuts to secure the
Glider Brackets.
STEP #3 -
Set the Chair on top of the Base. Attach
the Leg of the Chair onto the Glider
Bracket using " Lock Nuts to secure the
See Glider Bracket Diagram
www.Poly-Lumber-Furniture.com
1-877-904-1234