Berthold Duo XPERT LB 470 Level User manual

Evaluation Unit
LB 470 Level
Operating Manual
56925BA2
Rev. No.: 04, 05/2020
Embedded software version as of vers. 1.4.0 (CU and MU)

LB 470 Level 1 About this Operating Manual
56925BA2 Rev.04, 05/2020 7
1About this Operating Manual
1.1 Applicable Documents
This manual contains the following document:
•Informations sur la sécurité, 56925BA59 (see appendix)
•Technical Information, 56925TI1L (see appendix)
1.2 Some Prior Remarks
The product is handed over to you by the manufacturer BERTHOLD TECHNOLOGIES
GmbH & Co. KG (designated as Berthold in the following) in a complete and func-
tionally reliable condition.
This operating manual illustrates how to:
•set up/install the product
•make electrical connections
•perform measurements
•apply software settings
•Install the extension module (optional)
•carry out maintenance on the product
•fix errors
•disassemble the product
•dispose of the product.
Read these instructions thoroughly and completely before working with the prod-
uct. We have tried to compile all information for safe and proper operation for
you.
However, should questions arise which are not answered in this operating manual,
please refer to Berthold.
1.3 Storage Place
This operating manual as well as all product-related documentation relevant to the
respective application must be accessible at all times near the device.
1.4 Target Group
This operating manual is directed at qualified specialist personnel who are familiar
with handling electrical and electronic assemblies as well as with communication
and measuring techniques.
Specialist personnel refers to those who can assess the work assigned to them and
recognise possible dangers through their specialist training, knowledge and expe-
rience as well as knowledge of the relevant regulations.

1 About this Operating Manual LB 470 Level
856925BA2 Rev.04, 05/2020
1.5 Validity of the Operating Manual
The operating manual is valid from the delivery of the Berthold product to the user
until its disposal. Version and release date of this operating manual can be found
in the bottom of each page. Modification services are not performed by the man-
ufacturer Berthold.
The manufacturer reserves the right to make changes to this operating manual at
any time without stating reasons.
NOTICE
The current revision of this operating manual replaces all previous versions.
1.6 Structure of the Operating Manual
This operating manual has been divided into chapters. The series of chapters should
help you to familiarise yourself quickly and properly with the operation of the
product.
1.7 Copyright
This operating manual contains copyright-protected information. None of the
chapters may be copied or reproduced in any other form without prior authorisa-
tion from the manufacturer.
1.8 Representation
Identifier
Meaning
Example
Quotation mark
Field in the soft-
wareuser interface
"Value"
Vertical line
Path specification Settings | Selection
Pointed brackets
Keys and buttons
<Update>
Round brackets
Image reference Connect the plug (fig. 1,
item 1)
In the software description, the term "clicking" is used if a process is to be acti-
vated. This also refers to the pressing of a button or an area on the touch display
if a mouse is not used for control.

LB 470 Level 1 About this Operating Manual
56925BA2 Rev.04, 05/2020 9
1.9 Warning Notes
Warning notes aredesigned as follows:
Signal Word
Source and consequence
Explanation, if required
Prevention
In case of emergency
•Warning symbols: (warning triangle) draws attention to the hazard.
•Signal word: Indicates the severity of danger.
•Source: Specifies the type or source of danger.
•Consequence: Describes the consequences of non-compliance.
•Prevention: Specifies how the hazard can be avoided.
•In case ofemergency: Specifies which actions are required in the event of
the occurrence of risk.
Symbols used in the Operating Manual
In this manual, warning instructions before instructions for action refer to risks of
injury or damage to property. The hazard-prevention measures described must be
observed.
jDANGER
Indicates an
imminent
, major hazard, which will certainly result in serious in-
juries or even death if the hazard is not avoided.
j
WARNING
Indicates a
potential
hazard, which can result in serious injuries or even death
if the hazard is not avoided.
jCAUTION
Refers to a
potentially dangerous
situation, which can result in medium or
minor physical injuries or damages to property, if it is not avoided.
NOTICE
If this information is not observed, deterioration in the operation and/or prop-
erty damage may occur.
IMPORTANT
Sections marked with this symbol point out important information on the
product or on handling the product.
Tip
Provides tips on application and other useful information.

1 About this Operating Manual LB 470 Level
10 56925BA2 Rev.04, 05/2020
Symbols used on the Device
Read the operating manual
Please observe the instructions in this operating manual.
Electrostatic discharge
Please note the handling instructions. Electrostatically endangered compo-
nents. Please observe the instructions in this operating manual.
Protective earth connection
At this position, connect the protective earth conductor (PE).
Equipotential bonding connection
At this position, connect the equipotential bonding conductor.
Direct voltage
The device is operated with direct voltage and may only be connected with a
direct voltage source.
Alternating voltage
The device is operated with alternating voltage and may only be connected
with an alternating voltage source.
No domestic waste
The electric product must not be disposed of in domestic waste.