BH FITNESS G2330 User manual

G2330 ELLIPTICAL

1
Dear Customers,
We want to thank you for having chosen an Elliptical trainer and
wish you a lot of fun and success during training.
Please note and follow the enclosed safety and assembly
instructions carefully.
If you have questions please do not hesitate to contact us.
Table of Content as below:
1.) Safety Instruction
2.) Exploded Drawing
3.) Parts List
4.) Assembly Instruction
5.) Computer Instruction
6.) Training Instruction

2
SAFETY INSTRUCTION
Before you start training on your home Elliptical trainer,
please read the instructions carefully. Be sure to keep the
instructions for information, in case of repair and for spare
part delivery.
This elliptical trainer is made for home use only and tested up to a
maximum body weight of 120 kg.
Follow the steps of the assembly instructions carefully.
For assembly use only suitable tools and asks for assistance with
assembly if necessary.
Check before the first training and every 1-2 months that all
connecting elements are tight fitting and are in the correct
condition. Replace defective components immediately and/ or
keep the equipment out of use until repair. For repairs, use only
original parts.
In case of repair, please ask your dealer for advice.
Avoid the use of aggressive detergents when cleaning the home
exerciser.
Ensure that training starts only after correct assembly and
inspection of the item.
For all adjustable parts be aware of the maximum positions to
which they can be adjusted/tightened to.
The home exerciser is designed for adults. Please ensure that
children use it only under the supervision of an adult.

3
Ensure that those present are aware of possible hazards, e.g.
movable parts during training.
Consult your physician before staring with any exercise program.
He or she can advise on the kind of training and which impact is
suitable.
Please follow the advice for correct training as detailed in training
instructions.
The load/work level can be adjusted by turning the adjustment
knob on the handle bar stem.
The safety level of this equipment can be maintained only if it is
check regularly for all assembly procedure mentioned in the
assembly instruction sheet.
Please check regularly for the tightening knobs to notice any
irregular wear.
WARNING！INCORRECT/EXCESSIVE TRAINING CAN
CAUSE HEALTH INJURIES.

4
EXPLODED DRAWING

5
PARTS LIST
Part#
Description
Quantity
1
Computer M3
1
2
Screw M5*10
4
3
Upper Computer cable
1
4
End cap
2
5
Hand grip
2
6
Hand pulse cable
2
7
Screw
4
8
Handle bar
1
9
Washer 8*16*1.5T
3
10
Spring ￠8
17
11
Allen bolt M8*20
7
12
Screw M5*15
2
13
Computer Rack
1sets
14
Power tube 38*17*15T
6
15
Handle bar post
1
16
Knob
1
17
Hex screw M10*20
2
18
Tube Φ16*68
1
19
Allen bolt M6*5
1
20
Lower computer cable
1
21
Upper swing pole foam Φ32*3t*560mml
2
22
End cap Φ32*42
2
23L
Upper swing bar L
1
23R
Upper swing bar R
1
24
Curved Washer 8*19*1.5
4
25
Wave Washer ￠17*25
2
26
Washer Φ8*Φ36*3T
2
27
Lower swing bar
2
28
Allen bolt M10*78
2
29L
Padel support bar L
1
29R
Padel support bar R
1
30
Oval end cap
2

6
31
Bushing Φ14*Φ32
2
32
Tube Φ14*10*59mml
2
33
Washer 10*19*2T
2
34
Nylon nut M10
2
35L
Padel L
1
35R
Padel R
1
36
Carriage bolt M6*55
4
37
Padel Plug
4
38
Washer 8*24*2
2
39
tube Φ17.5*22*12
2
40
C-sharp clip Φ40
2
41
Bearing 2203-2RS
2
42
M Piece
2
43
Screw M5*7.5
2
44
Washer 6*14*2T
4
45
Spring washer ￠6
4
46
Knob M6
4
47
Gill pin Φ4*36
1
48
Plastic screw
1
49
Drill screw M5*20
6
50L
Chain cover L
1
50R
Chain cover R
1
51
Drill screw M5*15
11
52
Crank Cover
2
53
Cycle plate
2
54
Flathead screw M10
2
55
Cross welding
2
56
Self-tapping Screw M4.5*15
8
57
C-sharp clip Φ20
2
58
Washer 20*25*2
1
59
Sensor cable with sensor
1
60
Motor
1
61
Small quick pin M16*22
2
62L
Rear stibilizer cap L
1
62R
Rear stibilizer cap R
1

7
63L
Rear stiblizer slip tube L
1
63L
Rear stiblizer slip tube R
1
64
Bearing 6004-2RS
2
65
Washer 20*25*1
1
66
Wave Washer ￠20*25*0
1
67
Nylon Cap
4
68
Belt wheel
1
69
Metal plate welding
1
70
Spring ￠6
4
71
Allen bolt M6*16
4
72
Self-tapping screw
8
73
DC cable
1
74
Conduction wire
1
75
C-sharp clip Φ6
1
76
Wave washer 10*15*0.5
1
77
Washer 10*15*1
1
78
Idler wheel
1
79
Axis Φ10*42mml
1
80
Nylon cap M10
1
81
Rubber pad
1
82
Main frame
1
83
Axis
1
84
Front plstic cover
1
85
Front stibilizer
1
86
Front stabilizer cap
2
87
Flywheel
1
88
Belt 480J6
1
89
Chain adjust set
2
90
Nut
2
91
Axis protect piece
2
92
Allen bolt M8*20
4
93
Allen bolt M8*20
4
94
Allen key wrench
1
95
Adaptor
1

8
ASSEMBLY INSTRUCTION
1.Step 1.
Keep the item horizontally .And make both Rear stablizer slip out as arrow
shows .and tight the knob tightly
2.Step 2
Put the handle bar post (15)up (as arrows )and make it Straight.

9
3.Step3
Keep the handlebar post Straight ,And then use Knob(16) to tight the tightly
Then Fit the upper swing Pole Left and Right (23) by slotting them into the top
of the lower swing bar Left and Right (27) and secure in place using 4 Allen bolts (93)
and 4 spring washers (10) and 4 Wahser (24) tighten fully.
Now, your machine is ready for use.
Note:
Before using the machine, make sure
all the screws are fasten tightly.

10
COMPUTER INSTRUCTION
M3+ Manual
I. Display:
1. The field is an individual LCD displaying :
TIME, RPM\SPEED, DISTANCE, WATT\CALORIES, PULSE, USER .
2. Dot matrix display:
●The LCD screen will have a single dot matrix display with 12 rows and 16 columns.
●This dot matrix will be used to display the in work profile for the active program.
II. Modes:
I. POWER Mode: When powered on, the beeper beeps a long sound, and the full screen is display is 2
seconds, then it is into the Manual mode.(As Fig-1,Fig -2)
II. SLEEP Mode: When rpm signal or data is not input for 4 minutes, it will automatically enter Sleep
Mode.
Pedal the machine to start, or press any key to awaken the console.
Fig - 1 Fig - 2
III. USER Operation instructions(U0~U4):
Select USER 0, USER 1, USER2, USER 3, USER 4:
The message reads “U0” until a selection is made. By pressing ▲or ▼button to choose from “U0
~U4”.
1. Press ENTER button to accept “U0~U4”. By pressing the ▲or ▼button to adjust the
SEX(FEM\MALE).
2. Press ENTER button to accept SEX. By pressing the ▲or ▼button to adjust the AGE value.
3. Press ENTER button to accept AGE. By pressing the ▲or ▼button to adjust the HEIGHT(H.t)
value.
4. Press ENTER button to accept HEIGHT. By pressing the ▲or ▼button to adjust the WEIGHT(W.t)
value.

11
IV. Program operation instructions:
Press ENTER button into Choose PROGRAM:
By pressing the ▲or ▼button to adjust the profiles and it can be set the circle(select programs):
MANUAL→PROGRAM→FITNESS→WATT→PERSONAL→H.R.C.→RANDOM
1. If Press ENTER button to accept MANUAL
By pressing the ▲or ▼button to adjust the LEVEL(1-24).
Press ENTER button to accept LEVEL. By pressing the ▲or ▼button to adjust the TIME value.
Press ENTER button to accept TIME. By pressing the ▲or ▼button to adjust the DISTANCE value.
Press ENTER button to accept DISTANCE. By pressing the ▲or ▼button to adjust the CALORIES
value.
2. If Press ENTER button to accept PROGRAM
By pressing the ▲or ▼button to adjust the P1-P12
Press ENTER button to accept program. By pressing the ▲or ▼button to adjust the LEVEL(1-24).
Press ENTER button to accept LEVEL. By pressing the ▲or ▼button to adjust the TIME value.
Press ENTER button to accept TIME. By pressing the ▲or ▼button to adjust the DISTANCE value.
Press ENTER button to accept DISTANCE. By pressing the ▲or ▼button to adjust the CALORIES
value.
3. If Press ENTER button to accept FITNESS
Press the START/STOP button and started testing.
4. If Press ENTER button to accept WATT
By pressing the ▲or ▼button to adjust the TIME value.
Press ENTER button to accept TIME. By pressing the ▲or ▼button to adjust the DISTANCE value.
Press ENTER button to accept DISTANCE. By pressing the ▲or ▼button to adjust the CALORIES
value.
5. If Press ENTER button to accept PERSONAL, and you can set your own exercise program.
By pressing the ▲or ▼button to adjust the LEVEL(1-24), and press ENTER button to accept LEVEL
Press ENTER button for 3 seconds and into set the target TIME. By pressing the ▲or ▼button to adjust
the TIME value.
Press ENTER button to accept TIME. By pressing the ▲or ▼button to adjust the DISTANCE value.
Press ENTER button to accept DISTANCE. By pressing the ▲or ▼button to adjust the CALORIES
value.
6. If Press ENTER button to accept H.R.C. (55%, 75%, 90%, Tag)

12
By pressing the ▲or ▼button to choose the 55%, 75%, 90% and Tag
If choose the 55%, 75% and 90% , Press ENTER button to accept the mode and into set the target TIME.
If choose the Tag, Press ENTER button to accept the mode and into set the target Heart.
By pressing the ▲or ▼button to adjust the Heart value, Press ENTER button to accept Heart.
By pressing the ▲or ▼button to adjust the TIME value.
Press ENTER button to accept TIME. By pressing the ▲or ▼button to adjust the DISTANCE value.
Press ENTER button to accept DISTANCE. By pressing the ▲or ▼button to adjust the CALORIES
value.
7. If Press ENTER button to accept RANDOM
By pressing the ▲or ▼button to adjust the TIME value.
Press ENTER button to accept TIME. By pressing the ▲or ▼button to adjust the DISTANCE value.
Press ENTER button to accept DISTANCE. By pressing the ▲or ▼button to adjust the CALORIES
value.
V. Pre-defined program profile:
●MANUAL ●PROGRAM ●FITNESS
●WATT ●PERSONAL ●H.R.C.
●RANDOM

13
Program Profile for the P1~P12 Program
●P1 ●P2 ●P3
●P4 ●P5 ●P6
●P7 ●P8 ●P9
●P10 ●P11 ●P12
Program Profile for the H.R.C.(55%, 75%, 90%, Tag) Program
●HRC(55%) ●HRC(75%) ●HRC(90%)
●HRC(Tag)

14
VI. Recovery Test:
During the START or PAUSE stage, leave the hands holding on grips or leave the chest transmitter
attached and then press PULSE RECOV. button , all function displays will stop except “TIME”.
The testing will measure the heartbeat rate, Time starts counting from 00:10 - 00:09 - - to 00:00 if the
measurement does not show within 10 seconds, the measuring system will shut down and return to the
sport mode.
If 10 seconds after the heart rate value is not equal to zero , Time starts counting from 00:60 - 00:59 - - to
00:00. As soon as 00:00 is reached, the computer will show your heart rate recovery status with the grade
F1 to F6.
●TESTING ●Result
Note: Fitness of a user is shown by Message.
VII. FITNESS Test:
Entry into the FITNESS program, started
testing and the test time is 8 minutes. The
results as follows:
Figure
State
F1
VERY GOOD
F2
GOOD
F3
FAIR
F4
POOR
F5
VERY POOR
Figure
State
F1
EXCELLENT
F2
VERY GOOD
F3
GOOD
F4
FAIR
F5
POOR
F6
VERY POOR

15
VIII. Key Functions:
1. START/STOP button :
Press this button to start workout in sport mode, and during exercising, press this key to pause
the workout, then press this key to go on to exercise.
2. ENTER button :
To confirm set value and enter into the next set value
3. ▲and ▼button :
Used to change SEX, AGE, HEIGHT, WEIGHT, TIME, DISTANCE, CALORIES, TARGET HRC
value and work LEVEL.
Work level can be changed during a workout..
4. RECOVERY button :
Press the button to activate heart rate recovery function.
5. RESET button :
Set in USERS state, press the button to return to select the USER mode.
Set in Program state, press the button to return to the initial state of choose program.
Press and hold this button for three seconds for Total Reset (go to Power Up Mode).
6. QUICK START button:
Press this key can be directly into the MANUAL program and start workout.
Time (0: 00), Distance (0) and Calories (0), began to count.
IX. Functions View:
Item
Windows
Display Rang
Stored
1
SEX
MALE/ FEM
Yes
2
AGE
10 - 100
Yes
3
WEIGHT
20 - 330(Lb) / 10 - 150(KG)
Yes
4
HEIGHT
36 - 84(INCH) / 90 –210(CM)
Yes
5
TIME
0:00 - 99:59
No
6
DISTANCE
0.0 - 99.99
No
7
CALORIES
0 - 999
No
8
SPEED
0.0 - 99.9
No
9
PULSE
30 - 200 bpm
No
10
RPM
0 - 250 rpm
No
11
BRAKE RESISTANCE LEVEL
L1 - L24
No
12
USER
U0-U4
Yes

16