Birlea BRONTE User manual

ASSEMBLY INSTRUCTIONS
BRONTE 4'6" BED
www.birlea.com
Page 1 of 4
Vendor: S000053
Birlea
Suppliers of Inspiration
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR
BRONTE 4'6" BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY :
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
WARNING: If this bed is placed on a non-carpeted floor you must place some protection under all
legs to stop the bed frame from moving. If this is not adhered to there is no guarantee if the bed
frame collapses.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.

Vendor: S000053
Part List
Part
1 A 8
2 B 4
3 C 10
4 D 6
5 E 11
6F22
7 G
H
2
2
Description
Headend M6 x 16mm JCBC Screw
Footend M6 x 50mm JCBC Screw
Side Support M6 Nut
Side Frame M6 x 35mm JCBC Screw
Mid Support Double Slat Cap
Base Leg Single Slat Cap
Slat M8 x 50mm JCBC Screw
M8 Nut
Description Qty
Hardware List (found in box 1)
Part
**M4 Allen Key & M5 Allen Key provided
Step 1: Fix the Side Support (3) to the Headend (1) and Footend (2) using hardware part (A), but do not fully tighten the
screw yet.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
1
1
2
2
1
3
22
Qty
1
1
2
2
2
1
3
Box
I4Finial
Page 2 of 4
Small Allen Key
A
A
1
3
1
5
2
4367

Vendor: S000053
Step 2: Place the side frame (4) at the bottom of the side support (3) and tightly secure using hardware parts (B) and (C).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Place the mid support (5) ON TOP of both side frames (4) and tightly secure using hardware parts (G) and (H).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Fit the base legs (6) to the mid support (5) according to the holes at the side using hardware parts (C) and (D)
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
B
C
Small
Allen Key
1
4
3
D
D
C
Small Allen
Key
Base Leg
C
5
6
Page 3 of 4
G
Big Allen
Key
4
5
H
TOP

Vendor: S000053
Step 5: Push hardware part (E) into the mid support (5), then place hardware part (F) onto the end of each slat (7).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Insert the slats (7) to hardware part (E) and press firmly into the side supports (3). Finally insert hardware part (I) to the
headend (1) and footend (2).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Additional Information :
For complete product information, images and dimension diagrams please visit the website www.birlea.com.
If you have any issues with your item please contact the retailer directly you purchased it from who will be able
to resolve any issues with Birlea.
Why don't you send us photos of your assembled furniture to [email protected] to be shared in our #birleahome
feature on instagram.
Birlea
Suppliers of Inspiration Page 4 of 4
E
5
F
7
I
I
I
E
7
5