Noble House Home Furnishings SOFA User manual

Label Picture Description QTY
A Sofa Base 1
Assembly Instructions
Caution: You must read this before you proceed
Please look in seat for hardware packs and legs.
Sofa
Parts List
Noble house Home Furnishings LLC Page 1 OF 14

B Sofa Backrest 1
C Left Arm 1
D Right Arm 1
E
Wooden Leg with
Plastic Gasket
4
F
Middle Wooden Leg
with Plastic Gasket
1
Label Picture Description QTY
①Plastic Gasket 3
②
Bolt(M8*80mm）14
③Washer 14
Hardware List
Noble house Home Furnishings LLC Page 2 OF 14

④Spring Washer 14
⑤Allen Key 1
Before
Beginning
Assembly:
Assembly Preparation
Noble house Home Furnishings LLC Page 3 OF 14

Step 1
Overview
Assembly Steps
This Sofa has multiple parts and may require about 30 minutes to assemble. To
give you an overview of the Loveseat parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Take the Sofa Backrest(B), Left Arm (C), Right Arm(D) and a Small Package out
from the carton "A" and place them on a clean, non-marring surface.
FRONT FACING
Sofa Backrest (B)
Left Arm (C)
Wooden Leg (E)
Sofa Base (A)
B
Carton(A)
1 OF 2
C D
Right Arm(D)
Middle Wooden Leg (F)
Noble house Home Furnishings LLC Page 4 OF 14

Step 2
Step 3
Open the Small Package to take out the Wooden Legs(E)&(F) and Hardware.
Take out the Sofa Base (A) from Carton "B", place it on a clean, non-marring
surface.
A
E
①
Carton(B)
2 OF 2
②
⑤
③④
F
Noble house Home Furnishings LLC Page 5 OF 14

Step 4
With assistance from your adult partner, put the Sofa Backrest(B) between the Left
Arm(C) and Right Arm(D).
Align the mounting brackets on the both sides of Sofa Backrest(B) with those on the
Left Arm(C) and Right Arm(D) , then slide the Sofa Backrest(B) downwards to make
sure it locks as pictured.
Please squeeze the armrest properly against the backrest to ensure that the inserts
can be assembled smoothly.
B
C
D
C
Noble house Home Furnishings LLC Page 6 OF 14

Step 5
With assistance from your adult partner,align the mounting positions on the back
and on both sides of the Sofa Base(A) to the mounting positions of Left
Arm(C),Right Arm(D) and Sofa Backrest(B), make sure the bottom of the Sofa
Base(A),Sofa Backrest(B),Left Arm(C) and Right Arm(D) at the same level.
CD
B
A
Noble house Home Furnishings LLC Page 7 OF 14

Step 6
④
②③
⑤
Insert the Bolts(②) inside
half as pictured until 4 bolts
each side are all bolted in,
then you can tighten all the
Bolts with Allen Key(⑤).
Noble house Home Furnishings LLC Page 8 OF 14

Step 7
With assistance from your adult partner,place the whole product on a clean, non-
marring surface.
Open the non-woven cover under both sides of Sofa Base(A).
Then using the Allen Key(⑤) secure Sofa Base(A) to the Left Arm(C) and Right
Arm(D) with Bolts(②), Spring Washer(④)and Washers(③).
Please don't tighten the Bolts, just bolt them half-way until all are bolted in,
then tighten all the Bolts with the Allen Key(⑤).
Note: The bottom of the Sofa Base(A) frame must be aligned with the bottom
of the handrail.
②
⑤
③
④
Insert the 5 Bolts(
②
) half-way until all Bolts are
bolted in with Allen Key(⑤)
A
Noble house Home Furnishings LLC Page 9 OF 14

Open the Non-woven cover under Sofa Base(A).
Using the Allen Key(⑤) secure Sofa Base(A) to the front-bottom Sofa Backrest(B)
with the Bolts(②), Spring Ring(④)and Washers(③).
Insert all the 5 Bolts(②) half-way starting one by one as pictured.
Then tighten the Bolts(②) with the Allen Key(⑤).
Close the non-woven fabric under the Sofa Base(A) with Velcro.
Noble house Home Furnishings LLC Page 10 OF 14

Install the Wood Legs(E) and Middle Wooden Leg(F) onto the bottom of the Sofa by
placing one Gasket(①) on the threaded stem.
Tighten by turning the Leg clockwise.
Note: The use of Gaskets are OPTIONALand are especially useful to help
alleviate slight wobbles. Some Legs may need more than one Gasket whilst
some Legs may not need any.
Step 8
FE
E
E
E
Noble house Home Furnishings LLC Page 11 OF 14

Make sure all of the parts connected to the right position and stronge enough.
Now your Sofa is ready for use.
This Sofa can only be used on a flat, level surface.
Step 9
Don't turn the sofa directly, you
need to lift the sofa up then put
it down gently(in order to make
sure the Legs or Legs support
are not be damanged by any
incorrect operation.
Noble house Home Furnishings LLC Page 12 OF 14

Step 10
Note: if the sofa is unstable, you can adjust the leveller under the Middle
Wooden Leg to make it more stable.
There is a leveller under the
middle leg, which can be
used to adjust the height of
the leg , turning it clockwise
to increase the height or
turning it counterclockwise
to reduce the height.
Noble house Home Furnishings LLC Page 13 OF 14

Noble house Home Furnishings LLC Page 14 OF 14