Bissell CROSSWAVE X7 CORDLESS PET PRO 3055 Series User manual

Go online for a comprehensive walkthrough
of your new purchase!
This guide features everything you need to get ready for first use,
including setting up, using and maintaining your machine, but join
us online for a comprehensive walkthrough. Our online support
includes tips and troubleshooting, videos, product registration,
parts, and more. Go to support.BISSELL.com.
CROSSWAVE® X7 CORDLESS PET PRO
3055 SERIES

2BISSELL.com
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
• Use indoors only.
• Do not immerse. Use only on surfaces moistened by cleaning
process.
• Use only cleaning products intended for use with this appliance
to prevent internal component damage. See the “Choosing Your
Brush Roll & Formula” section of this guide.
• Do not allow to be used as a toy. Close attention is necessary when
used by or near children.
• Do not use for any purpose other than described in this user guide.
Use only manufacturer’s recommended attachments.
• Do not charge with damaged charger or plug. If appliance is not
working as it should, has been dropped, damaged, left outdoors or
dropped into water, have it repaired by a qualified technician.
• Do not pull or carry charger by cord, use cord as a handle, close
door on cord, or pull cord around sharp edges or corners. Do not
run appliance over cord. Keep cord, docking station or charger
away from heated surfaces.
• Do not unplug charger by pulling on cord. To unplug, grasp the
charger plug, not the cord.
• Do not handle charger, charger plug, or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening
blocked; keep openings free of dust, lint, hair, and anything that
may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from
openings and moving parts.
• Turn OFF all controls before plugging or unplugging charger.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible materials (lighter
fluid, gasoline, kerosene, etc.) or use in areas where they may be
present.
• Do not pick up anything that is burning or smoking, such as
cigarettes, matches or hot ashes.
• Do not use without filters in place.
• Risk of injury from moving parts. Brush may start unexpectedly.
Turn OFF before cleaning or servicing.
• Turn OFF all controls, including the power switch and disconnect
charger from electrical outlet before making any adjustments,
performing maintenance, troubleshooting, changing accessories,
or storing appliance. Such preventative safety measures reduce the
risk of starting the appliance accidentally.
• Recharge appliance only with the charger specified by the
manufacturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another battery pack.
• Use only with charger Mass Power Electronic Ltd., model S030-
1B295085HU.
• Battery pack, charging port on the appliance and charger output
are not to be short-circuited.
• Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
• Do not use appliance that is damaged or modified. Damaged or
modified batteries may exhibit unpredictable behavior resulting in
fire, explosion or risk of injury.
• Do not expose battery pack or appliance to fire or excessive
temperature. Exposure to fire or temperature above 130°C/265°F
may cause explosion.
• Follow all charging instructions and do not charge the appliance
outside of the temperature range specified in the instructions.
Charging improperly or at temperatures outside of the specified
range may damage the battery and increase the risk of fire.
• Have servicing performed by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the
product is maintained.
• Do not modify or attempt to repair the appliance except as
indicated in the instructions for use or care.
• Unplug charger from electrical socket when not in use, before
cleaning maintaining or servicing the appliance.
• Keep the temperature range of between 4-40°C/40-104°F when
charging battery, storing unit or during use.
• Do not charge the machine outdoors.
• Do not turn your appliance ON until you are familiar with all
instructions and operating procedures.
• This appliance contains batteries that are non-replaceable.
• Do not incinerate the appliance even if it is severely damaged. The
batteries can explode in a fire.
• The battery must be removed from the appliance before it is
scrapped.
• Keep appliance on a level surface.
• Do not carry the vacuum cleaner while it in use.
• Do not use appliance in an enclosed space filled with vapors
given off by oil-based paint, paint thinner, some moth-proofing
substances, flammable dust, or other explosive or toxic vapors.
• Do not use to pick up toxic material (chlorine bleach, ammonia,
drain cleaner, etc.).
• Do not pick up hard or sharp objects such as glass, nails, screws,
coins, etc.
• Plastic film can be dangerous. To avoid danger of suffocation, keep
away from children.
• Liquid must not be directed towards equipment containing
electrical components.
• This product contains Lithium-Ion rechargeable batteries. DO
NOT mix Lithium-Ion batteries with general household waste.
According to Federal and State regulations, removal and proper
disposal of Lithium-Ion batteries is required. For specific battery
disposal instructions please contact Call2Recycle at 877-723-1297
or visit www.call2recycle.org. For full instructions on battery
removal for recycling visit support.BISSELL.com.
IMPORTANT INFORMATION
• Keep appliance on a level surface.
• If your appliance has a motorized brush roll, do not
leave machine running in the same spot without the
handle fully upright.
• Do not store where freezing may occur.
SAVE THESE INSTRUCTIONS
This model is for household use only. Commercial use
of this appliance voids the manufacturer’s warranty.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
When using an electrical appliance, basic precautions should be observed, including the following:
WARNING
This product contains Lithium-Ion rechargeable
batteries. DO NOT mix Lithium-Ion batteries
with general household waste. According to
Federal and State regulations, removal and
proper disposal of Lithium-Ion batteries is
required. For specific battery disposal instructions please
contact Call2Recycle at 877-723-1297 or visit www.call2recycle.
org. For full instructions on battery removal for recycling visit
support.BISSELL.com.

BISSELL.com 3
We’re so happy you chose a CrossWave® X7 Cordless Pet Pro multi-
surface cleaner. We put this guide together to help with set up and
maintenance. We’ve also included some tips we think will come in
handy when you first start using this machine, so let’s get started!
For a complete guide to your purchase, go to support.BISSELL.com.
Important Safety Instructions................................ 2
What’s in the Box? .........................................................4
Product View .....................................................................4
Assembly..............................................................................5
Charging the Battery.................................................... 5
Choosing Your Brush Roll & Formula ...............6
Filling the Clean Water Tank .................................. 7
Cleaning Your Floors....................................................8
Emptying the Dirty Water Tank..........................10
Clean Out Cycle ...............................................................11
After-Cleaning Care.....................................................12
Storing Your Machine................................................. 14
Warranty............................................................................. 14
Troubleshooting............................................................. 14

4BISSELL.com
What’s in the Box?
Standard accessories may vary by model.To identify what should be included with your purchase,
please refer to the “Carton Contents” list located on the carton top flap.
Product View
For additional support videos and information, visit support.BISSELL.com.
Handle & Body 3-in-1 Docking
Station
Charging Adapter
Plug
(4) Trial-Size
Formulas
Replacement Filter
(2) PET Multi-
Surface Brush Rolls
Wood Floor Brush
Roll
Multi-Surface
Brush Roll
Clean Out Brush
Product View
1. Upper Handle
2. Mode Button
3. Power Button
4. Solution Spray Trigger
5. Clean Out Cycle Button
6. Clean Water Tank
7. Carry Handle
8. Dirty Water Tank Release Button
9. Dirty Water Tank
10. Strainer (inside tank)
11. Easy-Remove Brush Roll
Window Button
12. Brush Roll Window
1
9
12
24
6
5
7
11
3
8
10
Digital Display
A. Battery Indicator
B. Area Rug Mode
C. Hard Floor Mode
D. Error Indicator
E. TURBO PET™ Mode
F. Fan Error Indicator
G. Clean Water Tank Empty
H. Clean Out Cycle
I. Dirty Water Tank Full
A
BC
G I
DE
H
F

BISSELL.com 5
1. Firmly insert the handle into
body of machine.
2. When the handle is inserted
correctly, a button will appear
behind the clean tank.
Assembly
Go to support.BISSELL.com for assembly videos.
Charging the Battery
Go to support.BISSELL.com to watch helpful how-to videos.
Make sure machine is fully charged before first use. To check the battery status, remove the machine
from the dock and press the power button to turn it ON. You’ll know the battery is fully charged
when all three white status lights are illuminated.
1. Plug the charging cord
into the bottom of the 3-in-
1 Docking Station. Plug the
adapter into a wall outlet.
2. Place your machine onto
the dock. The Battery Life
Indicator will illuminate when
charging.
3. For maximum run time,
charge the machine for 4
hours.

6BISSELL.com
Choosing Your Brush Roll & Formula
View our family of formulas for your family of mess-makers at BISSELL.com.
Keep plenty of CrossWave® formulas on hand so you can clean whenever it fits your schedule.
Note: Only use CrossWave formulas in your machine. Other formulas or household cleaners may
harm the machine and will void the warranty. Do not use hard floor formula on area rugs or carpet.
Multiple Surfaces Wood Floors Area Rugs
Multi-Surface Formula
Great for cleaning all sealed hard
floors and refreshing area rugs.
Multi-Surface Brush Roll
Microfibers mop and nylon bristles
help remove tough, sticky messes
while picking up dry debris.
Wood Floor Formula
Restores your wood floors’ natural
shine.
Wood Floor Brush Roll
Soft-touch microfibers wash sealed
hardwood floors while picking up
dry debris.
Area Rug Formula
Removes stuck-on and embedded
dirt from area rugs.
Area Rug Brush Roll
Bristles work on area rugs to pick
up dry debris and pet hair.
Homes with Pets Hard Floors Sensitive Floors
PET Multi-Surface with Febreze
Formula
Removes pet odors to clean sealed
hard floors and refresh area rugs.
PET Multi-Surface Brush Roll
Microfibers mop and nylon bristles
help remove tough, sticky messes
while picking up dry debris and
pet hair.
Hard Floor Sanitize
Cleans and sanitizes, eliminates
99.9% of bacteria.*
Multi-Surface Brush Roll
Microfibers mop and nylon bristles
help remove tough, sticky messes
while picking up dry debris.
PET Clean + Natural Multi Surface
Effective, plant-based cleaning
formula to eliminate pet odors
Multi-Surface Brush Roll
Microfibers mop and nylon bristles
help remove tough, sticky messes
while picking up dry debris.
*Kills 99.9% of Enterobacter aerogenes (ATCC 13408) and Staphylococcus aureus (ATCC 6538)
Certain trademarks used under license from The Procter & Gamble Company or its affiliates.
WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL
cleaning formula intended for use with the hard floor device.
ATTENTION This machine is designed to be used on sealed hard floors and area rugs.

BISSELL.com 7
1. The clean water tank is
located on the back of the
machine. Pull the tank up to
remove.
2. Open the cap on top of the
tank.
3. Choose the best BISSELL®
formula and brush roll for
your needs using the chart on
page 6.
4. Fill with hot (140°F/60°C
MAX) tap water to the WATER
FILL line. Do not use boiling
water. Do not heat water in
the microwave.
5. Add formula to the
FORMULA FILL line.
6. Close the cap. Slide the tank
back into place.
Filling the Clean Water Tank
Go to support.BISSELL.com to watch additional how-to videos.

8BISSELL.com
Mode
Power
1. Press the power button
ON. Press the mode button to
switch between modes.
2. Recline to start the brush
roll spinning. Brush roll will not
spin when machine is upright.
3. Before each use, hold the
solution spray trigger for 10
seconds to prime the system
with solution.
LED lights are always
illuminated, but turn blue when
the trigger is held. Bubbles will
appear in brush roll window
when solution is flowing.
Power
4. Hold the solution spray
trigger to apply solution on
forward and backward passes.
5. Release the trigger and
make a backward pass without
dispensing solution. To dry
floors faster, make additional
dry passes.
6. Turn OFF the machine by
pressing the power button.
Cleaning Modes
Hard Floor Mode Area Rug Mode TURBO PET™ Mode
BEST FOR Everyday messes
on sealed hard floors, like
tracked-in mud, spilled cereal
and milk, coffee, and more!
SOLUTION
SUCTION
BEST FOR Refreshing and
cleaning dry messes, like
crumbs, dirt, hair, and more
from area rugs.
SOLUTION
SUCTION
EXTRA BOOST OF CLEANING
FOR: Tough pet messes,
eliminating pet odors, and
removing stuck-on messes, like
pet drool and food; jelly, honey,
tracked-in mud, and more.
SOLUTION
SUCTION
Cleaning Your Floors
We have cleaning tips for stuck-on messes and more at support.BISSELL.com.
ATTENTION Do not overwet carpet or hardwood floors. Be careful not to run over loose objects or edges of area
rugs. Stalling the brush may result in premature belt failure.

BISSELL.com 9
ATTENTION Do not overwet carpet or hardwood floors. Be careful not to run over loose objects or edges of area
rugs. Stalling the brush may result in premature belt failure.
Sanitizing Hard Floors
Please read “DIRECTIONS FOR USE” on Hard Floor Sanitize label. Use on hard nonporous floors only.
5m
1. Remove visible soil before
cleaning. Hold trigger down to
apply solution on to the floor.
2. Allow formula to remain wet
on the floor for five minutes.
3. With the spray trigger
released, make forward and
backward passes to extract
solution.
Cleaning Your Floors
(continued)

10 BISSELL.com
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
Emptying the Dirty Water Tank
Go to support.BISSELL.com for a full list of how-to videos.
1. Press the button on the top
of tank and grab the front
handle and pull tank out.
2. Hold the top of the tank
near the sides of the filter and
pull up to remove.
3. Pull strainer tab out of the
tank to separate debris from
dirty water.
4. Throw debris into the trash. 5. Pour dirty water down the
sink and rinse the tank.

BISSELL.com 11
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
Clean Out Cycle
Go to support.BISSELL.com for a full list of how-to videos.
Note: For best results, run the Clean Out Cycle no more than two times after each cleaning session.
1. Place the machine on the
3-in-1 Docking Station.
Note: If the battery is fully
depleted, charge until the Clean
Out Cycle button illuminates.
2. Empty dirty water tank
prior to starting the cycle.
3. Make sure water reaches the
Clean Out Cycle line. Refill if
needed.
4. Push the Clean Out Cycle
Button to start the 40-second
cycle.
5. For easy drying, press the
button on top of the foot to
release the window. Rest the
window on the dock. See page
12 for more cleaning tips.
6. Remove the machine from
the dock and wipe out the tray.
Do NOT rinse under faucet.
This keeps water out of the
charging plug.

12 BISSELL.com
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
After-Cleaning Care
Go to support.BISSELL.com for a full list of how-to videos.
Important: The filter must be cleaned and dried after every use to maximize suction and performance.
Replace the filter every  months.
1. Press the button on the top of
the foot to release the brush roll
window.
2. Pull the brush roll tab to
remove.
3. Use the Clean Out Brush
hook to remove hair wrap.
4. The brush and window can
be hand washed.
5. Remove and empty the
dirty water tank following
steps on page 10.
6. Use the Clean Out Brush to
clean the dirty water tank.
7. Remove filter from the top
of the tank by pulling it up.
8. Wash filter and screen
with warm water and mild
detergent. Rinse the bottom of
the tank cover.
9. Leave all parts out to dry
before reassembling.
CONTINUED ON NEXT PAGE

BISSELL.com 13
After-Cleaning Care
(continued)
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
10. Clean along the inside of
the foot and suction hose with
the brush.
11. Place the end of the brush
into the right side of the foot.
12. Press the tab of the brush
down so it locks into place.
13. Replace the brush roll
window by lining up tabs on
the edges of the foot.
14. Press the window back so
it “clicks” into place.
15. Reassemble the dirty water
tank.
16. Insert the bottom of the
tank first. Pivot the top toward
the machine until it “clicks”
into place.
17. Wipe the dock with a cloth.
Do NOT rinse under faucet.
This keeps water out of the
charging plug.
18. Wipe the gold charging
contacts with a cloth.

14 BISSELL.com
Troubleshooting
Below are some of the issues you may run into. If you don’t see the issue you’re experiencing
below, visit support.BISSELL.com.
Storing Your Machine
Go to support.BISSELL.com for more useful tips on storing and maintaining your machine.
Store your machine in a protected, dry area. Since this product uses water, it must not be stored
where there is danger of freezing. Freezing will damage internal components and may void the
warranty.
NOTICE To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
Machine Issues
Problem Possible Cause Remedies
Streaking or
loss of suction
power
Brush roll window is not latched. Reinstall brush roll window.
Debris channel in foot is clogged. Clean the channel with a paper towel.
Filter is clogged by debris and/
or is wet.
Remove debris clogging the filter screen, then
clean and dry the filter.
Brush roll is wet and dirty. Clean and dry the brush roll.
No spray
Clean water tank is empty. Refill tank. Follow steps on page 7.
Clean water tank is not seated
properly.
Remove and reseat tank.
Brush roll window is not latched. Reinstall brush roll window.
Not holding trigger to spray
solution.
Hold solution spray trigger continuously
while using the machine.
Leaking
Clean water tank or lid is
damaged.
Remove tank from machine and inspect for
damage on tank and/or lid. If damage is
found, contact us.
Dirty water tank is damaged. Remove tank from the machine and inspect
for damage. If damage is found, contact us.
Dirty water tank is full. Empty tank.
Machine is
not charging
Charging contacts on the 3-in-1
Docking Station are dirty.
Use a cloth to wipe the gold charging contacts
on the dock. If issue persists, contact us.
CONTINUED ON NEXT PAGE
Warranty
3-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-844-383-2630
for complete warranty information.
NOTICE Disconnecting the battery will destroy the appliance and invalidate the warranty.

BISSELL.com 15
Error Codes
Problem Possible Cause Remedies
Error and fan error
indicators on digital display
are blinking.
Air path is clogged. Check the suction hose for
clogs. Perform standard after-
cleaning care maintenance.
See pages 12-13.
Dirty water tank full
indicator on digital display
blinks 4 times, then turns
solid.
Dirty water tank
is full.
Remove and empty tank.
Thoroughly clean tank and
sensors. Place tank back into
the machine.
Dirty water tank full
indicator on digital display
blinks four times, then turns
solid. Error indicator is
blinking.
Dirty water tank is
not seated properly.
Reseat tank.
Clean water tank indicator
on digital display blinks
then turns solid. Foot light
blinks blue 4 times.
Clean water tank is
empty.
Refill tank. Follow steps on
page 7.
Clean water tank is
not seated properly.
Remove and reseat tank.
Brush roll window LED
is blinking white, error
indicator is blinking.
Brush roll is
obstructed.
Remove brush window lens
and brush roll to clean hair
and debris off of brush, brush
ends and brush gear.
Brush roll window LED is
blinking white and blue.
Brush window lens
is not attached.
Remove and reinstall the lens
until it “clicks” into place.
Battery indicator on digital
display shows continuous
blinking of 1 LED light
Battery is too low
to run the self-
cleaning cycle.
Charge the machine for 30
minutes prior to running.
Note: Any other servicing should be performed by an authorized service representative.
Troubleshooting
(continued)

©2021 BISSELL Inc. All rights reserved.
Part Number 1626156 06/21 RevB
But wait, there’s more!
Join us online for a comprehensive walkthrough of
your new product, including troubleshooting,
product registration, parts and more.
Go to support.BISSELL.com.
VIDEOSINFOREGISTER PARTS SUPPORT
We’re Waggin’ Our Tails!
BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help
save homeless pets. When you buy a BISSELL product, you help save pets,
too. We’re proud to design products that help make pet messes, odors and
pet homelessness disappear. Visit BISSELLsavespets.com to learn more.