Black Box IC402A-R2 User manual

STEP X - Name of Step
24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BL ACKBOX.COM
IC402A-R2
USB 2.0
EXTENDER
QUICK START GUIDE

STEP 1 - Connect Local to Remote via CAT5e/6/7 cable
CONNECT LOCAL TO REMOTE
Place the units where desired, and connect
the CAT5e/6/7 (solid core) extension link
cabling into the Link ports (RJ-45)
of the Local and Remote Extenders.
LOCAL EXTENDER,
FRONT VIEW
CAT5E/6/7 CABLE
(NOT INCLUDED)
MAXIMUM LENGTH:
330 FEET (100 M) REMOTE EXTENDER,
FRONT VIEW

STEP 2 - Connect the power adapter
Connect the power adapter into your desired
unit—Local Extender or Remote Extender.
NOTE: Plug the power adapter into either
the Local or Remote unit, not both units.
LOCAL EXTENDER,
FRONT VIEW
OR
REMOTE EXTENDER,
FRONT VIEW
CAT5E/6/7 CABLE
(NOT INCLUDED)
MAXIMUM LENGTH:
330 FEET (100 M)
PLUG THE POWER ADAPTER INTO
EITHER THE LOCAL OR REMOTE UNIT

STEP 3 - Connect the Local Extender to your computer
Connect the Local Extender into your
computer using the included USB 2.0
cable.
LOCAL EXTENDER,
BACK VIEW
COMPUTER
USB CABLE
USB TYPE A
CONNECTOR
USB TYPE B
CONNECTOR

STEP 4 - Attach the USB device to the Remote Extender
OPTIONAL: DOWNLOAD USER MANUAL
For product specifications and regulatory information,
refer to the User Manual. You can download this
document from our web site.
1. Go to www.blackbox.com
2. Enter the part number (IC402A-R2) in the search box.
3. Click on the product in the “Product Results” page.
4. Click on the “Support” tab on the product page,
and select the document you wish to download.
If you have any trouble accessing the Black Box
site to download the manual, you can contact
our Technical Support at 877-877-2269
or inf[email protected]
REMOTE EXTENDER,
FRONT VIEW
USB TYPE A
CONNECTORS
USB CABLES
Attach your USB device(s) to the Remote
Extender.
NOTE: These USB cables are NOT included.

STEP X - Name of Step
COPYRIGHT 2017 BLACK BOX CORPORATION. ALL RIGHTS RESERVED.