BluDot Good Times GT1-DINTBL-WL Quick start guide

Good Times Dining Table
DESIGNED IN 2018
ASSEMBLY NOTES | REV 01
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.
MASSIVE ATTACK.
Micro this and mini that has a place, but Good Times is happy to buck trend
and assert its heft and take up some damn space.

1 | 844.425.8368 GOOD TIMES DINING TABLE
Leg
Table Top
4
1
QTY
QTY
PT. 1684
8QTY
PT. 3005
8QTY
PT. 3006
QTY
PT. 9001
1QTY8
Parts & Hardware

[e-mail] |2ASSEMBLY NOTES
PT. 1684 x 8PT. 3005 x 8PT. 3006 x 8PT. 9001 x 1
adjustable leveler
Step 01
ATTACH LEGS.
Attach the legs to the table top as shown using
the provided hardware. Periodically tighten the
bolts to ensure that the connection remains
strong over time.
Adjustable levelers are located at the bottom
of each leg and adjusted by rotating. Ensure
table is level prior to first use.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner formulated
for wood furniture. Wipe completely dry with a soft cloth in the direction of the wood grain.
WALNUT CARE
The walnut version of this table is finished with a Rubio®Monocoat Finish. We suggest treating
the surface with Rubio® Monocoat Refresh every 12 to 24 months to extend the life of the finish as
instructed:
After cleaning the surface, apply Rubio® Monocoat Refresh and spread with a cloth. Allow the product
to react for 5 minutes before wiping the surface dry with a cloth or paper towel. Polish until the surface
feels completely dry. Work in zones that can be fully wiped dry within 15 minutes. The surface will be
completely dry and useable after 5 hours.
Rubio®is a registered trademark of Muylle-Facon.