BluDot Sidekick Quick start guide

Sidekick Shelf
DESIGNED IN 2021
ASSEMBLY NOTES | REV 00
@BLUDOT
We design all our pieces in our Minneapolis studio. Follow
along on Instagram for some sneak peeks into the process.
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.

1 | 844.425.8368 SIDEKICK SHELF
Pt. 1217 Pt. 8036 Pt. 1701
Pt. 1226
Shelf
Hanging Bracket
Stem
421
2
1
2
1
QTY QTY QTY
QTY
QTY
QTY
QTY
Parts & Hardware

[e-mail] |2ASSEMBLY NOTES
Pt. 1701 x 1Pt. 1217 x 4Hanging
Bracket x 2
Low shelf
High shelf
Step 01
ASSEMBLE SHELF
The shelf height may be assembled either
low or high on the stem. Attach the shelf
and hardware in the orientation shown
depending on desired shelf height.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Pt. 8036 x 2* Pt. 1226 x 2
6 3/16”
(158 mm)
1/8”
(3 mm)
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner formulated
for wood furniture. Wipe completely dry with a soft cloth.
Step 02
INSTALL WALL SHELF
Wall anchors and fasteners are included
for installation. Please consult your local
hardware professional to determine the
hardware best suited for your wall type.
Mark the mounting locations with the
vertical distance as shown.
If the mounting location is not positioned
on a stud, drill a 3/16” hole in the marked
location and insert wall anchor. If the
mounting location is located on a stud,
this step of installing an anchor may be
skipped. Instead, drill a 1/16” pilot hole in
the marked position.
Attach the fastener to the wall, leaving a
gap as shown. Make small adjustments
to the gap distance if the hanging bracket
does not align correctly.
Hang stem on fasteners to complete
installation.