Argos Flexa 3395884 User manual

Drawer set White for Daybed.
Dimensions
Length - 186cm
Depth - 46,5cm
Height - 23cm
Weight - 12 kg
Issue 1 - 11/11/14
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@flexa.dk
Assembly Instructions - Please keep for future reference 3395884

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance

Components - Parts
Please check you have all the parts listed below
Drawer back x3
(57,5x17x1.5cm)
3
No. 12-01505751
Drawer base x3
(58.6x44,5x0.3cm)
1
No. 4309-0305861
Drawer front x3
(61,8x21,5x1.5cm)
2
No. 15-01506182-20
Drawer side left x3
(45x17x1.5cm)
4
No. 12-01504502
Drawer side right x3
(45x17x1.5cm)
5
No. 12-01504501
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055
2

Please check you have all the fittings listed below
7x34mm for ø5 Minifix bolt x12
Tools required
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
ø15x9.5mm Minifix cam x12
B
E
3,5x15mm Chipboard screw x8
C
D
Components - Fittings
3.5x12mm Chipboard screw x24
3
FNo. 4001-022-20
ø26x28.5mm Castor x12
4,0x45mm Chipboard screw x3
ø40x30mm Knob x3
No. 3903-40045
H
G
4.0x40mm Chipboard screw x18
No. 3901-40040
I
Phillips
screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
J
8x30mm Dowel x12
No. 3930-08030
40x20x17mm Angle x4
No. 4008-024
No. 3901-35015
No. 4003-002
No. 3933-15010
No. 4020-005
No. 3902-35012

Assembly Instructions
Step 1
Attach the dowels Gto
the drawer sides 5and
4.
It may be necessary
to tap the dowels in
very gently with a small
hammer.
Attach minifix bolts Ato
drawer fronts 2.
Repeat for all drawer
sides and drawer fronts.
Attach the knobs Fto
the drawer fronts 2with
screws I.
Repeat for all three
drawer fronts.
Attach the drawer sides
5and 4to the drawer
front 2with the minifix
cams B.
Repeat for all three
drawers.
Step 2
Step 3
24
5
2
5
4
2
B
B
I
F
A
AG
G
A
G
F
I
B
4

Assembly Instructions
Step 4
Push the drawer base 1
carefully into the drawer.
Repeat for all three
drawers.
Attach the drawer back
3to the drawer sides
5and 4with screws
H.
Repeat for all three
drawers.
Attach the castors Dto
the drawer sides 5and
4with the screws J.
Follow the measurement.
Repeat for all three
drawers.
5
Step 6
Step 5
15
4
5
4
3
5
5
4
D
J
J
D
D
J
D
J
D
H
H
H
J
D
35 mm

Place one stop bracket
Eto the list for slats on
the bedside. Follow the
measurement. Make
sure that the bracket E
is flush with the backside
of the bedside. Fasten
the stop bracket E
with screws C. Attach
another bracket Eto
the other end of the list.
Attach two more brackets
Eto the list placed 572
mm from the brackets E
at the ends of the list.
Assembly is complete.
Assembly Instructions
Step 7
6
20 mm
5
C
E
E
C
E
C
EC
E
C
If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055
E-mail: order@flexa.dk
Ref.no. 44-01427-20 A Stand: 111114 Page 7 (82-20101-20)
E
C
572 mm
C