BluDot Strut Table Quick start guide

Strut Table
DESIGNED IN 2005
ASSEMBLY NOTES | REV 02
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.
A DESIGN WORTH KNOCKING OFF. (AHEM...)
Structure and design are on with the Strut. A proud stance for any
gathering. Conferencing for eight, dining for six, or a power desk for one.

1 | 8 4 4 . 4 2 5 . 8 3 6 8 STRUT TABLE
Leg
Top
2
1
QTY
QTY
Pt. 4023
4QTY
Pt. 1683
8QTY
Pt. 1083
14QTY
Pt. 1602
2QTY
Pt. 9004
1QTY
Leg Plate
Support
4
1
QTY
QTY
Parts & Hardware

[e-mail] | 2ASSEMBLY NOTES
Pt. 1683 X 8 Pt. 9004 X 1
Step 01
ATTACH LEG PLATES.
Attach leg plates to legs using the
provided hardware as shown.

3 | 8 4 4 . 4 2 5 . 8 3 6 8 STRUT TABLE
Pt. 1602 X 2 Pt. 9004 X 1
Step 02
ATTACH LEG SUPPORT.
Place the top panel face down on a soft
surface. Attach leg support to top using the
provided hardware as shown. Do not fully
tighten the bolts.

[e-mail] | 4ASSEMBLY NOTES
Pt. 1083 X 14 Pt. 9004 X 1
Step 03
SECURE LEGS.
Secure legs using the provided hardware as
shown.Tighten the bolts that were installed
in the previous step before proceeding to the
next step.

5 | 8 4 4 . 4 2 5 . 8 3 6 8 STRUT TABLE
PT. 4023 X 4
Step 04
INSTALL FLOOR GLIDES.
Attach floor glides to the legs as shown. Have a
second person help lift and turn the table right
side up.

[e-mail] | 6ASSEMBLY NOTES
Step 05
ADJUST FLOOR GLIDES.
The floor glides at the bottom of the legs can
be adjusted by rotating them. Ensure table is
level prior to first use.
Periodically tighten the bolts to ensure that the
connection remains strong over time.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and
fingerprints, use a quality cleaner formulated for painted
furniture. Wipe completely dry with a soft cloth.