Blueview CS20 User manual

THROUGH-HOLE LED MODULE
CS20
1
[phone]
[phone]
[email protected]
Add:No.1000,Section 2,2nd Konggang Road, Southwest
Aviation Industrial Development Zone,Chengdu,Sichuan,China.
ZIP:610207 Web.:www.blueviewled.com
Specications are subject to change without notice.
Blueview 2020-All rights reserved.Made.in China.
®
5Years2835 160°IP68
Large luminous surface, give out light evenly
Adopt PC color outer case and optical lens
Adopt elastic buckle design, suitable for light box at 1-3mm depth
Silicone coating technology, great waterproof performance
Single module can be cut
elastic buckle design
large luminous surface
clamping position of
top tightening piece
Through hole installation
Letter shell installation
Suitable for all kind of supermarket，middle or large advertising signage, bars, indoor atmosphere lighting, signs
of aviation and navigation obstacles, etc
■
■
■
■
■
■
■
■
Features
Application
Installation
12V

THROUGH-HOLE LED MODULE
CS20
2
[phone]
[phone]
[email protected]
Add:No.1000,Section 2,2nd Konggang Road, Southwest
Aviation Industrial Development Zone,Chengdu,Sichuan,China.
ZIP:610207 Web.:www.blueviewled.com
Specications are subject to change without notice.
Blueview 2020-All rights reserved.Made.in China.
®
Optical & Electrical Parameters
Model No. Luminous
Flux(lm/pcs)
Beam Angle E󰀩cacy
(lm/W)
Voltage
(DC V)
Power
(W/pcs)
CRI
CS20
9000-10000K
6000-7000K
2800-3100K
10000-12000K
12000-15000K
15000-20000K
R
G
B
Y
O
P
W
IB
F
160°
160°
27
27
27
90
91
88
27 90
26 88
26 85
2620-625 10
7520-525 39
2460-465 9
17570-575 95
7600-610 38
7/ 40
11475-485 59
2/ 9
80+
/ 12
12
0.18
0.3
Other Parameters
CS20 1 50 50
LED Qty (pcs) Standard Run Quantity(pcs) Max Run(pcs)
-20~+60℃-20~+70℃
Working
Temperature
Storage
Temperature
Model No.
Unit:mm[inch]
Prole Drawings
NOTE:for detail drawing,please consult sales rep.
1. The test environment temperature is 25 ± 2 ℃;
2. The above data are typical values. The actual parameters of the product may be di󰀨erent from the typical data.
3. If the lamp beads of di󰀨erent gears are selected, the color temperature will be di󰀨erent and the luminous ux will uctuate to a certain extent.
4. The quantity refers to the number of LEDs in a single product;
5. The error of luminous ux and power is ± 10%;
6. The maximum run quantity refers to the maximum number of cascades when the power supply is single ended.
Note:
CCT/Wavelength
Light Color

THROUGH-HOLE LED MODULE
CS20
3
[phone]
[phone]
[email protected]
Add:No.1000,Section 2,2nd Konggang Road, Southwest
Aviation Industrial Development Zone,Chengdu,Sichuan,China.
ZIP:610207 Web.:www.blueviewled.com
Specications are subject to change without notice.
Blueview 2020-All rights reserved.Made.in China.
®
Luminous Intensity Distribution Diagram
AVERAGE BEAM ANGLE(50%): 167.5°
C0 /180,169.4°
Unit：cd
C90/270,165.7°
Average Illumination
Flux Out: 42.74lm
Height Eavg，Emax Beam Angle: 165.29° Diameter
Note：Above picture is the test result of CS20, if you need the parameter of other model, please contact sales Rep

THROUGH-HOLE LED MODULE
CS20
4
[phone]
[phone]
[email protected]
Add:No.1000,Section 2,2nd Konggang Road, Southwest
Aviation Industrial Development Zone,Chengdu,Sichuan,China.
ZIP:610207 Web.:www.blueviewled.com
Specications are subject to change without notice.
Blueview 2020-All rights reserved.Made.in China.
®
Reliability Test
Test name Test type
Red Ink Test
PTC test
TH=60℃/4h,TH=20℃/1h,TH=-40℃/4h
continuous cycle power on
Put the sample vertically in the needle flame tester, the
open flame burns for 10 seconds and then goes out, and
then observe the self-extinguishing time of the sample
Immerse the sample tested by PTC etc. in the red ink,and
observe the status of the sample after 24h
Anti-UV test
Standard
Test temperature: -40°C— 60°C,2h one cycle(constant
temperature: 15 minutes,heating and cooling: 45 minutes)
TH=25℃, continuous power on
underwater 1m depth / 1h
TH=60/80°C, continuous power on
TH=60°C, UVB:280~315nm
Blueview
standard
Test condition Result
PASS
Environmental test
High and Low Temperature
Cycle Test
High Temperature Resistant Test
Room Temperature Aging Test
Waterproof Performance Test
Flame Retardant Test
Installation
Diagonal Pliers
1.Products and Tools
LED Power Supply Connection Terminals Ga󰀨er Tape
Model No. CS20
20±0.2
60-160
1~3
" "Hole size(mm)
"L" Distance(mm)
"H" Board thickness(mm)
2.Mounting board thickness and hole size
Hole
Mounting board

THROUGH-HOLE LED MODULE
CS20
5
[phone]
[phone]
[email protected]
Add:No.1000,Section 2,2nd Konggang Road, Southwest
Aviation Industrial Development Zone,Chengdu,Sichuan,China.
ZIP:610207 Web.:www.blueviewled.com
Specications are subject to change without notice.
Blueview 2020-All rights reserved.Made.in China.
®
Pass the product through the profile
and clamp it tightly
Screw the Aluminum prole to bottom cover
Screw the bottom cover to the wall
3.Installation Steps
Through-hole installation
Exposed channel letters installation
1. Clean the mounting surface.
2. Put the through-hole LED module into the reserved hole.
3. Cut the modules according to the requirements and treat the cut place with insulation and waterproof arrangement.
4. If the product needs to be connected, it is better to x with connection ends.
5. After that,light on for test.
Note: Treat the wire end with insulation,waterproof, and anti-corrosion measure,until it cannot pull out by hands.
①②③④⑤

THROUGH-HOLE LED MODULE
CS20
6
[phone]
[phone]
[email protected]
Add:No.1000,Section 2,2nd Konggang Road, Southwest
Aviation Industrial Development Zone,Chengdu,Sichuan,China.
ZIP:610207 Web.:www.blueviewled.com
Specications are subject to change without notice.
Blueview 2020-All rights reserved.Made.in China.
®
干
燥
剂
packing
① ② ③ ④
⑤ ⑥ ⑦
Desiccants
1. Prepare the desiccant and bind the product.
2. Put the product and desiccant into static shielding bag.
3. Seal and label the static shielding bag.
4. Put the static shielding bag side by side into carton box.
5. Seal the box.
6. Label the box.
7. Use packing belt to pack after adding the edge protectors.
NOTE:
Packaging information
Model No.
380*380*325 150 16 14.75(1±10%)13.55(1±10%) 22*21*16.1
Product Size L*W*H(mm) Carton Size(mm) PCS/Bag Bag/carton Gross Weight(kg)
The product is sealed in static shielding bag and packed in a special designed box
The above quantity and weight are only for the illustrated packaging method. There will be di󰀨erences in the quantity and weight with other packaging methods.
CS20
Net Weight(kg)
Before installation, check that the product parameters are consistent with the requirements (Seeing product specifications or product labels)
Load voltage, current, power and power supply should be matched with the product.
Follow the instructions of wiring diagram (first connect the load and then the power supply) to avoid short circuit.
Make sure the correct connection of positive and negative poles between products and power supply. Otherwise, the light will not be on.
Make sure the power cord firmly screwed into the terminal and it should not be pulled out by hands.
The terminal should have insulation,waterproof and anti-corrosive treatment.
■
■
■
■
■
■
Attentions before installation

THROUGH-HOLE LED MODULE
CS20
7
[phone]
[phone]
[email protected]
Add:No.1000,Section 2,2nd Konggang Road, Southwest
Aviation Industrial Development Zone,Chengdu,Sichuan,China.
ZIP:610207 Web.:www.blueviewled.com
Specications are subject to change without notice.
Blueview 2020-All rights reserved.Made.in China.
®
Warning
Do not disassemble or retrofit the light. Do not touch the surface of the light with a sharp object.
Do not do live-line working during installation,especially for high voltage product.
Do not use any organic chemical solvents.
Use neutral glass adhesive to fix this product and it needs to be dried 4 hours in the open environment after operation.
Treat the ends and the circuit connection points that are not connected to the main line with insulation,waterproof, and anti-corrosion in the installation.
Use 18AWG (0.75mm² cross-sectional area) or thicker core wire to avoid adverse consequences caused by overheating, if the power cable need to lengthen.
Make sure the input voltage meets the requirements and lines are connected correctly before lighting on.
This product is for signage, and do not use as general lighting.
Series connection within the max run.
The length of the power cable between the power supply and the led strip should not exceed 2 meters.Otherwise, large circuit loss will lead to inconsistent
brightness.
Installation, maintenance and repair should be operated by a qualified technician.
■
■
■
■
■
■
■
■
■
■
■
Quick Guide
Problems
All LEDs can not light on.
LEDs can not light
on partly.
Brightness of LED is
inconsistent
tor insufficient.
LED flicker.
Automatic power protection from the open or short circuit
in output of the power supply. Fix the short circuit problem.
Correctly connection
Check the power supply system to fix it.
Replace with more powerful power
Make sure the working voltage of the product within ±5% of standard voltage, or
keep balance by circuit power consumption.
Reduce the quantities of the product in series connection to meet requirement.
Power on
Wrong connection of power supply.
Some switching mode power supplies are not powered.
Power supply line error.
Mistaken wire connection of some of products
Power overloaded.
Connection point fault. Remove bad connection point.
Replace a new power supply.
Please follow the instructions
Power supply circuit excessive consumption.
Excessive quantities in series connection of the product
Switching power supply failure.
Wrong Installation or use of products
Reasons
No electric supply.
Solutions
Common Faults and Troubleshoot
Statements and Recycling
Repair should be operated by a qualified technician, if the external circuit or main line of this product is damaged.
The parameters given in this manual are typical values and for reference only.
All illustrations and drawings in this manual are for reference.
This product is subject to change without notice.
Statements:
LED lighting products belongs to electronic products, please do recycling treatment according to the relevant WEEE directives.
Recycling:
■
■
■
■
■