BLUM AVENTOS HF User manual

Lift & Flap Systems
DRAWERS, HINGES & ASSEMBLY DEVICES
C.40
Drawers, Hinges & Assembly Devices
C
Dimension data and specifications may change without notification.
AVENTOS HF, HS, HL
Assembly, removal and adjustment – SERVO-DRIVE
Drive unit – AVENTOS HF, HS, HL
Setting
Before SERVO-DRIVE for AVENTOS
start-up, the lift mechanism must be
set so that the front remains open in
different positions
The lever must be in the completely
open position for drive unit
installation. Attach the opening angle
stop only after drive unit installation
and before the reference run
Distribution cable – AVENTOS HF, HS, HL
Assembly
Drive unit – AVENTOS HF, HS, HL
Assembly
Drive unit – AVENTOS HF, HS, HL
$MJDL$MJDL
$MJDL$MJDL
Locking mechanism

LINCOLN SENTRY
Lift & Flap Systems
A.2
DRAWERS, HINGES & ASSEMBLY DEVICES
C.41
C
Drawers, Hinges & Assembly Devices
AVENTOS HK
Assembly, removal and adjustment – SERVO-DRIVE
Distribution cable – AVENTOS HK
1
2
Assembly
Drive unit – AVENTOS HK
Assembly
Drive unit – AVENTOS HK
Locking mechanism

Lift & Flap Systems
DRAWERS, HINGES & ASSEMBLY DEVICES
C.42
Drawers, Hinges & Assembly Devices
C
Dimension data and specifications may change without notification.
AVENTOS HF, HS, HL, HK
Assembly, removal and adjustment – SERVO-DRIVE
SERVO-DRIVE switch
Assembly
Blum distance bumper
Installation in the front Aluminium frame: installation in the
cabinet side
Insert Blum distance bumper (do
not glue)
The Blum distance bumper may not
touch the SERVO-DRIVE-switch
Space requirement and safety distance
WARNING
A safety distance of 30 mm must
be maintained for air circulation
(see graphic); otherwise, there is
a risk that the Blum transformer
could overheat

LINCOLN SENTRY
Lift & Flap Systems
A.2
DRAWERS, HINGES & ASSEMBLY DEVICES
C.43
C
Drawers, Hinges & Assembly Devices
AVENTOS HF, HS, HL, HK
Assembly, removal and adjustment – SERVO-DRIVE
Blum transformer 72 W
Do not damage piercing tips
Blum transformer 72 W
Cable diagram
Cabling
Back (recommended)
Cabinet front edge to centre of hole
drilling:
HF: 167 mm
HS: 69 and/or 167 mm
HL: 74.5 and/or 167 mm
HK: 167 mm
Top (optional)

Lift & Flap Systems
DRAWERS, HINGES & ASSEMBLY DEVICES
C.44
Drawers, Hinges & Assembly Devices
C
Dimension data and specifications may change without notification.
AVENTOS HF, HS, HL, HK
Assembly, removal and adjustment – SERVO-DRIVE
Start-up SERVO-DRIVE switch
Please see the installation
instructions or go to www.blum.com
for more details about start-up
Activation
Setting up the wireless connection
between the SERVO-DRIVE switch
and the drive unit. A SERVO-DRIVE
switch can only be assigned to one
unit. All switches must be activated
from the reference run
SERVO-DRIVE switch
Press the <Switch> button until the
LED flashes
Press the SERVO-DRIVE switch until the
LED lights up continuously
Reference run
Operation
The drive unit recognises the
required parameters using the
reference run
Note:
The settings for the lift mechanism,
gaps or lever as well as the assembly
of the opening angle stop must take
place before the reference run.
If required reset the reference run =
“Reset Motion”
Min. 10 s
Reference run
Reference run is required: LED flashes Front opens and closes 2 times
automatically – the process should not
be interrupted or stopped
Close the front manually Press on front: the reference run starts
automatically

LINCOLN SENTRY
Lift & Flap Systems
A.2
DRAWERS, HINGES & ASSEMBLY DEVICES
C.45
C
Drawers, Hinges & Assembly Devices
AVENTOS HF, HS, HL, HK
Assembly, removal and adjustment – SERVO-DRIVE
Drive unit – AVENTOS HF, HS, HL
$MJDL$MJDL
Removal
Drive unit – AVENTOS HF, HS, HL
Removal
Drive unit – AVENTOS HK
Removal
Blum transformer 72 W
Removal