BMC M1 Mini User manual

User Manual
Auto CPAP System
M1 Mini
0123

M1 Mini User Manual V1.0
Table of Contents
1. Symbols·········································································································1
1.1 Control Buttons····················································································· 1
1.2 Device Symbols····················································································· 1
2. Warning, Caution and Important Tip····································································2
3. Intended Use··································································································2
4. Contraindications····························································································· 3
5. Specifications··································································································4
6. Available Therapies·························································································· 6
7. Glossary·········································································································6
8. Model············································································································7
9. Package Contents···························································································· 8
10. System Features···························································································· 9
11. First Time Setup···························································································10
11.1 Download BMC Mini App software··························································10
11.2 Placing the Device·············································································· 10
11.3 Installing the Air Filter and Filter Cap······················································11
11.4 Connecting to Power··········································································· 11
11.5 Assembling the Tubing and Mask··························································· 12
11.6 Using Oxygen with the Device·······························································13
11.7 Establish bluetooth connection······························································ 13
11.8 Setting····························································································· 14
11.9 Starting Treatment············································································· 14
12. Routine Use································································································ 14
12.1 Connecting the Tubing·········································································14
12.2 Adjusting the Tubing··········································································· 14
12.3 Turning on the Airflow········································································· 14
12.4 Using the Ramp Function····································································· 14
12.5 Turning the Device Off········································································ 15
13. Navigating the Patient Menu··········································································· 15
13.1 Steps to Navigating the Patient Menu····················································· 15
13.1.1 Accessing the setup interface·····················································15
13.1.2 Setting and saving parameters··················································· 15
13.2 Options of the Patient Menu and Corresponding Descriptions······················ 15
13.2.1 Treatment setting···································································· 15
13.2.2 Consumables setting································································ 16
14. Prompt·······································································································17
15. Introduction of "Report"················································································ 18
16. Introduction of "More"···················································································18
17. Software upgrading·······················································································19
18. Cleaning and Maintenance············································································· 19
18.1 Cleaning the Mask and Headgear···························································19
18.2 Cleaning the Enclosure········································································ 19
18.3 Cleaning the Tubing············································································ 20
18.4 Replacing the Air Filter········································································ 20
19. Traveling with the Device···············································································21
20. Transferring the Device to Another Patient·························································21
21. Reordering·································································································· 21
22. Technical Support························································································· 22
23. Disposal····································································································· 22
24. Troubleshooting··························································································· 23
24.1 Common Problems in Patients and Corresponding Solutions························ 23
24.2 Common Problems in the Device and Corresponding Solutions···················· 25
25. EMC Requirements······················································································· 26
26. Limited Warranty··························································································29

M1 Mini User Manual V1.0
1 / 29
1. Symbols
1.1 Control Buttons
Bluetooth Button
Start/Stop Button
1.2 Device Symbols
Follow Instructions for Use
Operating Instructions
Type BF Applied Part (mask)
Class II (Double Insulated)
AC Power
DC Power
IP22
≥12.5 mm Diameter, Dripping (15º tilted)
Serial Number of the Product
Lot number
Manufacturer
Manufacturing date
Authorized Representative in the European Community
European CE Declaration of Conformity
Bluetooth logo
Nonionizing radiation
Logo of BMC Medical Co., Ltd.

M1 Mini User Manual V1.0
2 / 29
2. Warning, Caution and Important Tip
WARNING!
Indicate the possibility of injury to the user or operator.
CAUTION!
Indicate the possibility of damage to the device.
IMPORTANT TIP!
Place emphasis on an operating characteristic.
Warnings, Cautions, and Important Tips appear throughout this manual as they apply.
3. Intended Use
The M1 Mini Auto CPAP system is a CPAP (Continuous Positive Airway Pressure) device
designed for the treatment of adult Obstructive Sleep Apnea (OSA) only, either in the
hospital or at home.
The device is to be used only on the instruction of a licensed health care professional. Your
home care provider will make the correct pressure settings according to your health care
professional’s prescription.
Several accessories are available to make your OSA treatment with this device as convenient
and comfortable as possible. To ensure that you receive the safe, effective therapy
prescribed for you, use only BMC accessories.
WARNINGS!
• This device is intended for adult use only.
• This device is not intended for life support.
• The instructions in this manual are not intended to supersede established medical
protocols.
• Do not bring the device or accessories into a Magnetic Resonance (MR) environment as it
may cause unacceptable risk to the patient or damage to the device or MR medical devices.
The device and accessories have not been evaluated for safety in an MR environment.
• Do not use the device or accessories in an environment with electromagnetic equipment
such as CT scanners, Diathermy, RFID and electromagnetic security systems (metal
detectors) as it may cause unacceptable risk to the patient or damage to the device. Some
electromagnetic sources may not be apparent, if you notice any unexplained changes in the
performance of this device, if it is making unusual or harsh sounds, disconnect the power
cord and discontinue use. Contact your home care provider.
CAUTION!
• This device is restricted to sale by or on the order of a physician.

M1 Mini User Manual V1.0
3 / 29
IMPORTANT!
• Read and understand the entire user manual before operating this system. If you have any
questions concerning the use of this system, contact your home care provider or health care
professional.
• The pictures in the user manual are only for reference, if they are different from the
material object, the latter shall prevail.
4. Contraindications
Studies have shown that the following pre-existing conditions may contraindicate the use of
positive airway pressure therapy for some patients:
Absolute Contraindications: Pneumothorax, mediastinal emphysema; cerebrospinal fluid
leak, traumatic brain injury, or pneumocephalus; shock caused by a variety of conditions
before treatment; active epistaxis; upper gastrointestinal bleeding before treatment; coma
or impaired consciousness making the use of mask during therapy impossible; giant vocal
fold polyp, etc.
Relative Contraindications: Severe coronary heart disease complicated with left
ventricular failure, acute otitis media, excessive respiratory secretions and weak cough, weak
spontaneous breathing, nasal or oral tracheal intubation and tracheotomy, severe nasal
congestion caused by a variety of conditions, lung bullae, and allergies to breathing masks,
etc.
The following side effects may occur during treatment:
- Dryness of the mouth, nose and throat
- Abdominal bloating
- Ear or sinus discomfort
- Eye irritation
- Skin irritation due to the use of a mask
- Chest discomfort
IMPORTANTS!
• An irregular sleep schedule, alcohol consumption, obesity, sleeping pills, or sedatives may
aggravate your symptoms.
• Please use the mask which meets ISO 17510: 2015 and ISO 18562 series standard.
CAUTION!
• Contact your health care professional if symptoms of sleep apnea recur. Contact your
health care professional if you have any questions concerning your therapy.

M1 Mini User Manual V1.0
4 / 29
5. Specifications
Device Size
Dimensions: 159 mm × 66 mm × 72 mm
Weight:< 400 g
Product Use, Transport and Storage
Operation Transport and Storage
Temperature: 5°C to 35°C (41˚F to 95˚F) -25°C to 70°C (-13˚F to 158˚F)
Humidity: ≤93% Non-condensing ≤93% Non-condensing
Atmospheric Pressure: 760 ～1060 hPa 760 ～1060 hPa
Bluetooth module
Operating Frequency Band: 2400 ～2483 MHz
RF power output: -40 ～+4 dBm
Mode of Operation
Continuous
Work Mode
CPAP, Auto
AC Power Consumption
100 - 240 V AC, 50 / 60 Hz, 1.0 A max
Main device input
19 V, 1.26 A
Type of Protection Against Electric Shock
Class II Equipment
Degree of Protection Against Electric Shock
Type BF Applied Part
Degree of Protection Against Ingress of Water
IP22
Pressure Range
4 to 20 hPa (in 0.5 hPa increments), ≤ 30 hPa under single fault conditions.
Pressure Display Accuracy
0 to 20 hPa，Margin of Error：±(0.5 hPa＋4%)
Static Pressure Stability
±0.5 hPa
Ramp
The ramp time ranges from 0 to 60 minutes.
Sound Pressure Level
＜30 dB, when the device is working at the pressure of 10 hPa.

M1 Mini User Manual V1.0
5 / 29
Sound Power Level
＜38 dB, when the device is working at the pressure of 10 hPa.
Maximum Flow
Test Pressures (hPa)
4
10
15
20
Measured Pressure at the
Patient Connection Port (hPa)
3
9
14
19
Average Flow at the Patient
Connection Port (L/min)
85
125
110
95
Air Tubing
Air tubing
Length
Inner diameter
Tubing
6 ft.(1.83 m)
15 mm
Tubing
6 ft.(1.83 m)
19 mm
The Form and the Dimensions of the Patient Connection Port
The 22 mm conical air outlet complies with ISO 5356-1.

M1 Mini User Manual V1.0
6 / 29
6. Available Therapies
The device delivers the following therapies:
CPAP – Delivers Continuous Positive Airway Pressure; CPAP maintains a constant level of
pressure throughout the breathing cycle.
Auto – Delivers CPAP therapy and provides an air pressure no less than the prescribed one
based on the patient’s needs.
7. Glossary
Apnea
A condition marked by the cessation of spontaneous breathing.
Auto-CPAP
Adjust CPAP pressure automatically to improve patient comfort based on monitoring of
apnea and snoring events.
Auto Off
When this feature is enabled, the device automatically discontinues therapy whenever the
mask is removed.
Auto On
With this feature, the device automatically initiates therapy when you breathe into the mask.
This feature is always enabled.
CPAP
Continuous Positive Airway Pressure.
LPM
Liters Per Minute.
OSA
Obstructive Sleep Apnea.
Patient Menu
The display mode in which you can change patient-adjustable device settings, such as the
starting pressure for the Ramp feature.
Ramp
A feature that may increase patient comfort when therapy is started. It can reduce pressure
and then gradually increase the pressure to the prescription setting so the patient can fall
asleep more comfortably.
Reslex
A therapy feature that is enabled by you or your home care provider to provide pressure
relief during exhalation.

M1 Mini User Manual V1.0
7 / 29
Standby State
The state of the device when power is applied but the airflow is turned off.
min
Means the time unit “minute”.
h
Means the time unit “hour”.
yy mm dd / mm dd yy / dd mm yy
Means the date.
8. Model
Model
Product Description
Product
Contents
Optional
Accessory 1
Optional
Accessory 2
Work
Mode
Maximum
Work
Pressure
(hPa)
M1 Mini
Main device,
Mini series
ventilator
control
software
(BMC Mini APP)
Tubing
Mask
CPAP,
Auto
20

M1 Mini User Manual V1.0
8 / 29
9. Package Contents
After unpacking the system, make sure you have everything shown here (Different models of
the product contain different components):
No.
Articles
Qty.
Notes
1
Main Device
1
2
Tubing
1
Optional
3
Mask
1
Optional
4
Air Filter
2
5
Power Adapter
1
6
Storage bag
1
Optional
7
Carrying Case
1
Optional
8
Accompanying Documents
1
All parts and accessories are not made with natural rubber latex.
The product’s service life shall be five years if the use, maintenance, cleaning and
disinfection are in strict accordance with the User Manual.
According to the power adapter standards of different countries, different power adapters
are configured.
IMPORTANTS!
• If any of the above parts are missing, contact your home care provider.
• Contact your home care provider for additional information on the available accessories of
this device. When using optional accessories, always follow the instructions enclosed with
the accessories.
WARNINGS!
• This device should only be used with the mask and accessories manufactured or
recommended by BMC or with those recommended by your prescribing physician. The use of
inappropriate masks and accessories may affect the performance of the device and impair
the effectiveness of therapy.
• The use of accessories other than those specified, with the exception of cables sold by the
manufacturer of the equipment or system as replacement parts for internal components,
may result in increased emissions or decreased immunity of the equipment or system.

M1 Mini User Manual V1.0
9 / 29
10. System Features
Fig. 10-1
Name
Function
Start/Stop
Button
Press this button to Start / Stop delivering air.
The indicator light is white.
Bluetooth
Button
Press this button to control Bluetooth status:
When Bluetooth is off, press this button to turn on the Bluetooth
function; when Bluetooth is on, double click this button to turn off the
Bluetooth function.
The indicator light is blue.
Air Outlet
Deliver pressurized air; connected to the tube or the air inlet of the
humidifier.
Device Status
Light
This light is white in normal state and orange in case of prompt message.
Fig. 10-2
Name
Function
Filter Cap
(Air Inlet)
Place the cap on the air filter, which is used to filter dust and pollen in
the air entering the device

M1 Mini User Manual V1.0
10 / 29
Fig. 10-3
Name
Function
DC Inlet
An inlet for the DC power supply.
11. First Time Setup
11.1 Download BMC Mini App software
Search and download BMC Mini App in the App store.
Support Android platform and IOS platform.
11.2 Placing the Device
Place the device on a firm, flat surface. The anti-skid pad installed at the bottom of the
device is convenient for fixing the device.
WARNINGS!
• If the device has been dropped or mishandled, if the enclosure is broken, or if water has
entered the enclosure, disconnect the power cord and discontinue use. Contact your home
care provider immediately.
• If the room temperature is warmer than 95°F (35°C), the airflow produced by the device
may exceed 109.4°F (43°C). The room temperature must be kept below 95°F (35°C) while
the patient uses the device.
CAUTIONS!
• If the device has been exposed to either very hot or very cold temperatures, allow it to
adjust to room temperature (20°C, approximately 2 hours) before beginning setup.
• Make sure the device is away from any heating or cooling equipment (e.g., forced air vents,
radiators, air conditioners).
• The device is not suitable for use in high humidity environments. Make sure that no water
enters the device.
• Make sure that bedding, curtains, or other items are not blocking the filter or vents of the
device.
• Keep pets, pests or children away from the device and avoid small objects being inhaled or
swallowed.

M1 Mini User Manual V1.0
11 / 29
• To avoid explosion, this device must not be used in the presence of flammable gases (e.g.
anesthetics).
• Tobacco smoke may cause tar build-up within the device, leading to the malfunctioning of
the device.
• Air must flow freely around the device for it to work properly.
11.3 Installing the Air Filter and Filter Cap
(1) Attach the air filter to the filter cap, as shown in Fig. 11-1.
Fig. 11-1
(2) Install the filter cap containing the air filter to the main device, as shown in Fig. 11-2.
Fig. 11-2
CAUTION!
• The air filter must be in place when the device is operating.
11.4 Connecting to Power
(1) Insert the plug of the power adapter into the DC Inlet of the device;
(2) Plug the other end of the power adapter into the power outlet.
Fig. 11-3

M1 Mini User Manual V1.0
12 / 29
WARNINGS!
• The device is powered on for use when the power adapter is connected. The Button
turns the blower On / Off.
• Use of the device at an AC voltage beyond the stated range (see Section 5 “AC Power
Consumption”) may damage the device or cause device failure.
• Do not place the device where it is difficult to disconnect the power supply.
• Do not stack too long cables or tubing at the head of the bed, which may entangle the head
or neck of the patient during sleeping.
CAUTION!
• Inspect the cord of power adapter often for any signs of damage. Replace a damaged
power adapter immediately.
IMPORTANTS!
• After interruption and restoration of the power supply, the device will restore its
pre-interruption working status automatically.
11.5 Assembling the Tubing and Mask
(1) Connect one end of the tube to the air outlet of the main device, as shown in Fig. 11-4.
Fig. 11-4
(2) Connect the other end of the tube to the mask according to the user manual for the mask.
Wear the mask.
WARNINGS!
• If multiple persons are going to use the device (e.g., rental devices), a low-resistance, main
flow bacteria filter should be installed in-line between the device and tube. Pressures must
be verified by your home care provider when alternate or optional accessories are in place.
• If you are using a mask with a built-in exhalation port, connect the mask’s connector to the
tube.
• If you are using a mask with a separate exhalation port, connect the tube to the exhalation
port. Position the exhalation port so that the vented air is blowing away from your face.
Connect the mask’s connector to the exhalation port.
• If you are using a full-face mask (a mask covering both your mouth and nose), the mask

M1 Mini User Manual V1.0
13 / 29
must be equipped with a safety (entrainment) valve.
• In order to minimize the risk of CO2rebreathing, the patient should observe the following
instructions:
- Use the accompanying tube and mask provided by BMC.
- Do not wear the mask for more than a few minutes while the device is not operating.
- Use only masks with vent holes. Do not block or try to seal the vent holes in the exhalation
port.
• Failure to use a MASK or ACCESSORY that permits spontaneous breathing can cause
asphyxiation.
• Failure to use a mask or accessory that minimizes rebreathing of carbon dioxide or permits
spontaneous breathing can cause asphyxiation.
11.6 Using Oxygen with the Device
Oxygen may be added at the mask connection. Please observe the instructions listed below
when using oxygen with the device.
WARNINGS!
• Connect the oxygen tube to the oxygen inlet of the mask.
• The oxygen supply must comply with the local regulations for medical oxygen.
• Turn on the device before turning on the oxygen. Turn off the oxygen before turning off the
device. Explanation of Warning: When the device is turned off, but the oxygen flow still exists,
oxygen may accumulate within the device's enclosure and pose a fire hazard. Turning off the
oxygen before turning off the device will prevent oxygen accumulation in the device and
reduce the risk of fire. This warning applies to most CPAP devices.
• Oxygen supports combustion. Keep the device and the oxygen container away from heat,
open flames, any oily substances, or other sources of ignition. DO NOT smoke in the area
near M1 Mini or the oxygen container.
• Sources of oxygen should be located more than 1 m from the device.
• When using oxygen with this system, a Pressure Valve must be placed in-line with the
patient circuit between the device and the oxygen source. The pressure valve helps prevent
the backflow of oxygen from the patient circuit into the device when the unit is off. Failure to
use the pressure valve could result in a fire hazard.
• Do not connect the device to an unregulated or high pressure oxygen source. The pressure
of oxygen source does not exceed the work pressure of the device.
11.7 Establish bluetooth connection
Connect the device to a power outlet,press the bluetooth button of the main device and the
bluetooth working status light flashes.Then open the BMC Mini App,click the bluetooth icon
, and start to search the device, select the BMC Mini device (name is device serial number,
please check the device nameplate information) in the device list for Bluetooth connection.If
the bluetooth device is connected successfully,the bluetooth working status light of the main
device will be kept on.

M1 Mini User Manual V1.0
14 / 29
11.8 Setting
Click "treatment Settings" and "consumables Settings" in the BMC Mini App to enter the
corresponding Settings interface respectively.See "13. Navigating the Patient Menu" in this
manual for detailed of the interface.
11.9 Starting Treatment
Press the Start/Stop Button or click on the icon in the BMC Mini App,the device
will start delivering air.
WARNINGS!
• Be sure to follow your physician’s instructions on adjusting the settings. To order any
accessories not included with this device, contact your equipment supplier.
• DO NOT connect any ancillary equipment to this device unless recommended by BMC or
your physician. If you suffer from chest discomfort, shortness of breath, stomach bloating, or
severe headache when using the device, contract your physician or qualified medical
personnel immediately.
12. Routine Use
12.1 Connecting the Tubing
Connect the power adapter and tubing properly according to the instructions in the First
Time Setup (Chapter 11). Connect the mask and headgear according to the user manual for
the mask.
CAUTION!
• Before each use, examine the tubing for any damage or debris. If necessary, clean the tube
to remove the debris. Replace any damaged tube. Make sure that the mask does not leak.
12.2 Adjusting the Tubing
Lie down on your bed, and adjust the tubing so it is free to move if you turn during sleep.
Adjust the mask and headgear until you have a comfortable fit and until there are no airflow
leaks around the mask.
12.3 Turning on the Airflow
Press the Start / Stop Button or click on the icon in the BMC Mini App to turn on
the airflow. The BMC Mini App will display treatment pressure and other information.
12.4 Using the Ramp Function
When the Ramp function is turned on, the pressure will gradually rise to the prescribed
treatment pressure according to the preset ramp time from the initial pressure, so as to
make the patient fall asleep easily. The BMC Mini App displays a real-time countdown of the
remaining ramp time in minutes.

M1 Mini User Manual V1.0
15 / 29
CAUTIONS!
• The ramp feature is not prescribed for all users.
12.5 Turning the Device Off
Take off the mask and headgear, press the Start / Stop Button or click on the icon
in the BMC Mini App, and the device will stop delivering air. Disconnect the power
adapter from the power outlet to power off the device.
13. Navigating the Patient Menu
13.1 Steps to Navigating the Patient Menu
13.1.1 Accessing the setup interface
Connect the power adapter properly. open the host and BMC Mini APP for bluetooth
connection. After the bluetooth connection is successful, click "treatment Settings" and
"consumables Settings" to enter the corresponding parameter setting interface.
13.1.2 Setting and saving parameters
In the parameter setting interface, you can set the parameters as required. After setting the
parameters, you need to save them, and the parameter setting is completed.
13.2 Options of the Patient Menu and Corresponding
Descriptions
13.2.1 Treatment setting
Option
Range
Description
Reslex
Off, 1/2/3
This feature enables the device to automatically reduce
the treatment pressure when the patient exhales, so as to
make the user more comfortable. The higher the
numbering is, the more pressure the device reduces. “Off”
means this feature is disabled.
Ramp Time
0～Max
Ramp
In order to increase comfort and help the patient fall
asleep easily, the pressure can increase gradually, when
the Ramp feature is enabled. The ramp time during which
the initial pressure rises to the prescribed treatment
pressure can be adjusted. The numbering increases or
decreases by five minutes. The BMC Mini App displays a
real-time countdown of the remaining ramp time in
minutes.
Auto on
On/Off
If this function is turned on,the therapeutic device will
automatically start delivering air under preset pressure
after the patient puts on a breathing mask and takes
several deep breaths. Click to select "on" or "off".
Auto off
On/Off
If this function is turned on,the therapeutic device will
automatically stop delivering air and shut down after the
patient takes off the breathing mask. Click to select "on" or
"off".

M1 Mini User Manual V1.0
16 / 29
Tubing Type
22mm/15mm
There are two tubing types available.Click to select
"22mm" or "15mm".
Mask Type
Full Face;
Nasal;
Pillow;
Other
There are three mask types available, namely Full Face
(full-face mask), Nasal (nasal mask), and Pillow (nasal
pillow mask). But the patient can choose other suitable
masks as well. When selecting masks other than the above
three types of BMC masks, the patient can identify the
masks as other.
Moisture
Exchanger
Type
None/
Normal/
Plus
It can be selected according to the moisture exchanger
type of mask.
Mask Test
/
Test the leakage of the mask, if it is not provided by our
company, it will be defined as ”other” mask.
13.2.2 Consumables setting
Option
Range
Description
Remind cycle of
Air Filter
Off/7 days/14 days/21
days/30 days/60
days/90 days
Set the air filter remind cycle, it will
remind the user once the cycle is up.
Remind cycle of
Mask
Off/30 days ～720 days
Set the mask remind cycle, it will remind
the user once the cycle is up.The setting
increment is 30 days.
Remind cycle of
Tubing
Off/30 days ～720 days
Set the tubing remind cycle, it will remind
the user once the cycle is up.The setting
increment is 30 days.
Remind cycle of
Moisture
Exchanger
Off/7 days/14 days/21
days/28 days
Set the moisture exchanger remind cycle,
it will remind the user once the cycle is
up.The setting increment is 7 days
Remind cycle of
cleaning and
maintenance
Off/180 days/360 days
Set the cleaning and maintenance remind
cycle, it will remind the user once the
cycle is up.

M1 Mini User Manual V1.0
17 / 29
14. Prompt
Prompt
Message
Description
Power Failure!!!
If the device is accidentally disconnected from power when it is
delivering air and the main device is connected with BMC Mini App
by bluetooth, a prompt will appear in BMC Mini App.
Note:
The prompt will not appear if power failure occurs when the device
is in standby state.
Device Fault!!!
If no airflow comes out of the machine when the device is started,
the status light of device will flash. If the main device is connected
with BMC Mini App by bluetooth, a prompt of “Device Fault!!!” will
appear in BMC Mini App.
Leak!!
If the automatic shutdown function of the device is off, when there
is a large amount of air leakage in the device, the device status light
flashes. If the main device is connected with BMC Mini App by
bluetooth, a prompt of “Leak!!” will appear in BMC Mini App.
Low Input
Voltage!!
If the voltage supplied by the power adapter is too low,the status
light of device will flash. If the main device is connected with BMC
Mini App by bluetooth, a prompt of “Low Input Voltage!!” will
appear in BMC Mini App.
Please Change
Filter!
When the remind cycle of air filter is set, the status light of device
will flash if the preset remind cycle reaches but without replacing
the air filter and reset remind cycle. If the main device is connected
with BMC Mini App by bluetooth, a prompt of “Please Change
Filter!” will appear in BMC Mini App.
Please Change
Tube!
When the remind cycle of tubing is set, the status light of device will
flash if the preset remind cycle reaches but without replacing the
tubing and reset remind cycle. If the main device is connected with
BMC Mini App by bluetooth, a prompt of “Please Change Tube!”
will appear in BMC Mini App.
Please Change
Mask!
When the remind cycle of Mask is set, the status light of device will
flash if the preset remind cycle reaches but without replacing the
mask and reset remind cycle. If the main device is connected with
BMC Mini App by bluetooth, a prompt of “Please Change Mask!”
will appear in BMC Mini App.
Please Change
Moisture
Exchanger!
When the remind cycle of moisture exchanger is set, the status light
of device will flash if the preset remind cycle reaches but without
replacing the moisture exchanger and reset remind cycle. If the
main device is connected with BMC Mini App by bluetooth, a prompt
of “Please Change Moisture Exchanger!!” will appear in BMC
Mini App.
Please clean and
maintain!
When the remind cycle of cleaning and maintenance is set, the
status light of device will flash if the preset remind cycle reaches but
without cleaning or maintaining and reset remind cycle. If the main
device is connected with BMC Mini App by bluetooth, a prompt of
“Please clean and maintain!” will appear in BMC Mini App.

M1 Mini User Manual V1.0
18 / 29
15. Introduction of "Report"
Users can select to view the usage reports generated in a certain day or a certain period of
time according to your needs. Users can use shortcut keys to quickly query or customize the
time period query..
Statistical
information
Range
Description
Sleep score
0～100
According to the usage data of the selected time
period, the usage effect is calculated with different
weights.
Using effect:
Run time
0～60/60
The score is calculated according to the user's usage in
the selected time period. The "0~60" part represents
the score of usage time, with the full score of 60
Leak
0～20/20
According to the air leakage during the selected period
of time, the score is calculated statistically. The "0~20"
part represents the score of air leakage, with a full
score of 20
AHI
0～10/10
The score was calculated according to the number of
AHI occurrences in the selected period. The "0 ～10"
part represents the score of AHI index, with a full score
of 10
Compliance
0～10/10
The compliance of a single day is calculated according
to the proportion of effective days used in the past
week, while the compliance of multiple days is
calculated according to the proportion of effective days
used in the selected period. The "0 ～10" part
represents the compliance score, with a full score of 10
For the above data, you can also click to view the column chart of each item to analyze the
trend of single use effect.
In addition to the above data, the report also contains detailed statistics on usage, pressure,
respiratory index and air leakage.
16. Introduction of "More"
Option
Description
Pressure unit
Used to select a pressure measurement unit, "hPa" or "cmH2O". The
default setting is "cmH2O".
Upload sleep data
Users can choose whether or not to upload sleep data to the cloud
platform. If the upload sleep data is selected, MP will automatically
upload sleep data to the cloud platform.
Erase Data
Click to choose erase the data stored in the APP or the main device.
In addition to the above functions, users can also view more usage information.