BMC G3 B20A User manual

User Manual
Respiratory Insufficiency Ventilator and
Accessories
BPAP System
G3 B20A / G3 B25S / G3 B25A / G3 B25VT /
G3 B30VT / G3 B30SV / G3 LAB

BPAP System User Manual
Table of Contents
1. Symbols·············································································· 1
1.1 Control Buttons····························································· 1
1.2 Device Symbols····························································· 1
2. Warning, Caution and Important Tip ··········································· 3
3. Intended Use ······································································· 3
4. Contraindications··································································· 4
5. Specifications ······································································· 5
6. Available Therapies ································································ 8
7. Glossary·············································································· 9
8. Model ···············································································11
9. Package Contents ·································································12
10. System Features ·································································13
11. First Time Setup ·································································15
11.1 Placing the Device·······················································15
11.2 Installing the Air Filter and Filter Cap / PM2.5 Filter···············15
11.3 Connecting Power Supply ··············································16
11.4 Connecting to Power Cord Locker ····································17
11.5 Assembling the Tubing / Heated Tubing and Mask ················18
11.6 Using Oxygen with the Device ········································20
11.7 Inserting the SD Card (Only for the device that equipped with SD
card) ·············································································20
11.8 Starting Treatment ······················································21
12. Routine Use ······································································21
12.1 Connecting the Tubing··················································21
12.2 Adjusting the Tubing ····················································21
12.3 Turning on the Airflow ··················································21
12.4 Heating the Water·······················································22
12.5 Using the Ramp Feature················································22
12.6 Accessing the iCode·····················································22
12.7 Turning the Device Off··················································23
13. Heated Humidifier ·······························································23
13.1 Filling the Water Chamber ·············································23
13.1.1 Removing the Water Chamber ·······························23
13.1.2 Filling the Water Chamber ····································23
13.1.3 Putting the Water Chamber back ····························24
13.2 Emptying the Water Chamber ·········································25
13.3 Setting the Humidity Level ·············································25
14. Using the SpO2Kit·······························································26
15. Using the Cellular Module and the WiFi kit ··································27

BPAP System User Manual
15.1 Connecting to Cellular Network ·······································27
15.2 Connecting to WiFi Network ···········································28
16. Navigating the Patient Menu···················································31
16.1 Steps to Navigating the Patient Menu································31
16.1.1 Accessing the Main Interface ·································31
16.1.2 Bringing up the Initial Setup Interface ······················32
16.1.3 Selecting Options ···············································33
16.1.4 Adjusting Options···············································33
16.1.5 Confirming Adjustments·······································34
16.1.6 Turning Pages ···················································34
16.1.7 Exiting the Patient Menu ······································34
16.2 Options in the Patient Menu and Corresponding Descriptions ···35
17. Alarm ··············································································37
17.1 Grading for Alarming and Description ································37
17.2 Visual Alarm ······························································37
17.3 Auditory Alarm ···························································37
17.4 Alarming Silence ·························································38
17.5 Alarm Messages and Description······································38
17.6 Reposition of Alarming··················································41
17.7 Alarm Journal·····························································41
17.8 Alarming Verification ····················································41
18. Cleaning and Disinfection ······················································42
18.1 Cleaning the Mask and Headgear·····································43
18.2 Cleaning the SpO2Kit ···················································43
18.3 Cleaning the Water Chamber ··········································43
18.4 Cleaning the Transfer Box ·············································43
18.5 Cleaning the Enclosure ·················································44
18.6 Cleaning the Tubing·····················································44
18.7 Replacing the Air Filter / PM2.5 Filter ································45
18.8 Disinfection ·······························································46
19. Traveling with the Device ······················································47
20. Transferring the Device to Another Patient··································47
21. Reordering········································································47
22. Technical Support ·······························································48
23. Disposal ···········································································48
24. Troubleshooting··································································49
24.1 Common Problems in Patients and Corresponding Solutions·····49
24.2 Common Problems in the Device and Corresponding Solutions ·51
25. EMC Requirements ······························································52
26. Limited Warranty ································································57

BPAP System User Manual
1 / 57
1. Symbols
1.1 Control Buttons
Home Button
Start / Stop Button
Knob
1.2 Device Symbols
Follow Instructions for Use
Operating Instructions
Type BF Applied Part (mask)
Class II (Double Insulated)
/
For indoor use only
AC Power
DC Power
IP22
≥ 12.5 mm Diameter, Dripping (15º tilted)
There is high voltage, beware of electric shock
Hot Surface
Serial Number of the Product
Manufacturer
EC REP
Authorized Representative in the European Community

BPAP System User Manual
2 / 57
Do not use the product if the package is damaged
Disassembly is prohibited
Maximum water level
European CE Declaration of Conformity
Product is intended for use by a single patient only
Lot number
Non-Ionizing Radiation
SD Card
WEEE Marking
Logo of BMC Medical Co., Ltd.
Air Inlet
Air Outlet