BMW 1 Series User manual

Original BMW Accessories.
Installation Instructions.
© BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z) 1
Retrofit BMW Accessory Menu (ACM)
BMW 1 Series (E 87)
BMW 3 Series (E 90, E 91, E92)
BMW 5 Series (E 60, E 61)
BMW 6 Series (E 63, E 64)
Installation instructions only valid for cars with M-ASK or CCC.
Retrofit kit no.:
65 50 0 418 002 Retrofit kit BMW accessory menu ACM E90, E91, E92, E60, E61 and E63, E64
65 50 0 422 701 Retrofit kit BMW accessory menu ACM E87
Installation time
The installation time is approx 1.75 hours, but may vary depending on the condition of the car and the equipment
in it.
Cars without auxiliary connection only
In general the car must be upgraded to the latest I stage status by flashing before starting the work. Depending on
the production age of the car and the work already carried out on the car, the programming times will vary, which
means that we cannot quote a specific time at this point.
The installation time does not include any time for programming/encoding, as this depends on the age of the car
and the equipment in it.
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies.
In any event, the target group for these installation instructions is specialist personnel trained on BMW cars with
the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and work
instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety
regulations.
To avoid unnecessary extra work and/or costs, if any installation or function problem occurs, after a
brief troubleshooting session (approx. 0.5 hours), please contact the following:
1. Either your national subsidiary or your regional office, or
2. The Support team via the Aftersales Assistance Portal (ASAP) using the optional technical parts
support application.
Specify the chassis number and the part number of the installed retrofit kit and give a precise
description of the problem.
Do not archive the hard copy of these installation instructions since daily updates are made by ASAP!

© BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z) 2
Pictograms:
Denotes instructions that draw your attention to dangers.
Denotes instructions that draw your attention to special features.
Denotes the end of the instruction or other text.
Installation information
In countries in which image reproduction is permitted up to a particular speed, the red cable from PIN 2 must be
disconnected at branch A1, insulated and tied back.
Ensure that the cables/lines are not kinked or damaged as you install them in the car. Costs incurred as a result of
this will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
All pictures show LHD cars; proceed accordingly on RHD cars.
In cars without an ancillary connection, the retrofit must be programmed / coded using SSS (software service
station) via the CIP, retrofit aux-in connection path.
Special tools required
00 9 317, Trim wedge
!

© BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z) 3
Contents
Section Page
1. Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Preparatory work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Retrofit cable connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Connection cable connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. Installation and cabling diagram for E87 cars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. Installation and cabling diagram for E90, E91 and E92 cars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Installation and cabling diagram for E60, E61 and E63, E64 cars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8. To install and connect the retrofit cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9. To connect the electrical power supply and connection cable for E87 cars . . . . . . . . . . . . . . . . . . . . . . . . . . 15
10. To connect the electrical power supply and connection cable for E90, E91 and E92 cars . . . . . . . . . . . . . 17
11. To connect the electrical power supply and connection cable for E60, E61 and E63, E64 cars . . . . . . . . 19
12. To install the ACM unit and universal CAN interface for E87 cars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
13. To install the ACM unit and universal CAN interface for E90, E91 and E92 cars . . . . . . . . . . . . . . . . . . . . . . 21
14. To install the ACM unit and universal CAN interface for E60, E61 and E63, E64 cars . . . . . . . . . . . . . . . . . 23
15. Concluding work and coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
16. Initialisation of the ACM unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
17. Circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

© BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z) 4
1. Parts list
Legend
ARetrofit cable
BConnection cable
CACM unit
DUniversal CAN interface
EBlack 3-pin socket casing
FCable tie 445 x 4.8 mm (4x)
GCable tie 200 x 3.6 mm (25x)
HMiniature connector (2x)
ISealing strip (5x)
JFusible link 7.5 A (large, for E60, E61, E63 and E64 cars)
KBlack 12-pin socket casing
LFusible link 7.5 A (small, for E87, E90, E91 and E92 cars)
KL
F
E
DGH I J
B
A
C
060 1082 Z

© BMW AG, Munich 01 29 0 420 167 8/2006 (Z/Z) 5
2. Preparatory work
TIS No.
Conduct a brief test ---
Disconnect negative pole of battery 12 00 ...
The following components must be removed first of all
for E60, E61 and E63, E64 cars
Side backrest section on the rear seat or seat back 52 ...
Wheel arch trim in luggage compartment on left 51 47 151
Door sill strip from the rear left (interior) 51 47 030
Door sill strip from the front left (interior) 51 47 000
A pillar trim at bottom left 51 43 070
Trim at the bottom left of the door pillar 51 43 150
Pedal trim 51 45 185
Control display 65 82 050
M-ASK/CCC 65 83 010
Release the oddments box 51 16 200
The following components must be removed first of all
for E87, E90, E91 and E92 cars
Backrest side section on the rear seat, left 52 ...
Wheel arch trim in luggage compartment on left 51 47 151
Door sill strip from the rear left (interior) 51 47 030
Door sill strip from the front left (interior) 51 47 000
A pillar trim at bottom left 51 43 070
Trim at the bottom left of the door pillar 51 43 150
Pedal trim 51 45 185
M-ASK/CCC 65 83 010
Unfasten the controller (E87 cars only) 61 31 195
Release cover for oddments box (E90 and E91 cars) 51 16 212
Trim at the bottom right of the dashboard 51 45 181
Glove box with casing 51 16 366
Undo the fuse holder on the right ---