Body Craft F460 User manual

SQUAT RACK SYSTEM
OWNER'S MANUAL
MB1308 Recreation Supply Inc.
Model No. F460 P.O. BOX 181
BODYCRAFT is a division of Recreation Supply Sunbury, OH 43074

Congratulations and Thank You!
Important Safety Notes
QUESTIONS?
1
Thank you for selecting the BODYCRAFT Squat Rack System.
The BODYCRAFT Squat Rack offers an impressive array of strength training
exercises to develop every major muscle group of the body. Whether your
goal is cardiovascular fitness, a shapely, toned body or dramatic muscle size
and strength, the BODYCRAFT Squat Rack will help you achieve the results
you want. For your safety and benefit, read this manual and the accompanying
literature before using the BODYCRAFT Squat Rack. Keep this manual for
future reference. If you have additional questions, please call your local
BODYCRAFT Squat Rack Dealer or our customer service department at
800-990-5556 Monday through Friday, 9 am until 5 pm Eastern Standard Time.
There is a risk assumed by individuals who use this type of equipment.
Before beginning this or any other exercise program consult your physician.
This is especially important for individuals over the age of 35 or persons
with preexisting health problems. Recreation Supply, Inc. assumes no
responsibility for personal injury or property damage sustained by or
through use of this product.
1. This product must be assembled on a flat, level surface to assure its proper function.
2. Clean pads and frame on a regular basis. We recommend warm, soapy water.
Do not use harsh or abrasive chemicals.
3. Inspect and tighten all parts before every use. Replace any worn
parts immediately. Failure to do so may result in serious injury.
4. Keep children away from the BODYCRAFT Squat Rack at all times.
5. Keep your hands away from moving parts other than the designated handles.
6. Exercise with care to avoid injury.
7. If you are unsure about the proper use of the BODYCRAFT Squat Rack system call
your local BODYCRAFT dealer or our customer service department.
As a quality home gym supplier we are committed to your complete satisfaction.
If you have questions, or find missing or damaged parts, we will guarantee your
complete satisfaction through our authorized dealer service centers or our home
office customer service department. Please call your local dealer for assistance
or BODYCRAFT at 800-990-5556 (9 AM - 5 PM) EST. Our trained technicians
will provide immediate assistance to you, free of charge.

Gym Placement Planner
Important Notes and Tips:
Ratchet
9/16" Socket
9/16" Combination Wrench
Adjustable Wrench
Rubber Mallet
2
WALL
Recommended Tools
for Assembly
1. Do not tighten any bolts until instructed.
2. Two people are reguired for the safe assembly
of the gym.
3. Use silicone lubricant on guide rods prior to weight
plate installation.
4. Carefully install plastic caps using a rubber mallet.
5. For your convenience, rulers are displayed throughout
this manual.
6. When measuring bolt lengths, only measure the shank.
i.e. 2-1/4" Hex Bolt
01/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/4 1/41" 2" 3"
47.3"
HEIGHT
82.1" 71.5"

1R
10
10
9
18
18
9
19
21
19
21
21
19
3
5
720
20
21
21
20
17
19
21
19
19
19
21
21
17
7
14
19
19
6
14
12
9
11
12
9
18
18 11
19
19
21
19
21
4
19
15
2R
12
11
19
19
16
16
21
21
21
19
19
21
5
21
19
20
13
20
13
20
13
20
13
20
20
19
16
21
20
2L
16
21
19
11
14
14
19
19
6
12
1L 15
21
20
20
OVERVIEW
3

1R
1L
2R
2L
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
20
21
22
1
1
1
1
1
1
2
2
2
4
2
4
4
4
4
4
4
2
4
26
12
20
1
UPRIGHT FRAME - RIGHT
UPRIGHT FRAME - LEFT
REAR UPRIGHT FRAME
- RIGHT
REAR UPRIGHT FRAME
- LEFT
CHIN UP BAR
REAR CONNECTOR
FRAME CONNECTOR
LOWER WEIGHT HOLDER
UPPER WEIGHT HOLDER
OLYMPIC ADAPTER SLEEVE
40 X 80mm OVAL CAP PLUG
2" OLYMPIC SPRING CLIP
RUBBER DONUT
3/8" X 4" HEX BOLT
3/8" X 3" HEX BOLT
3/8" X 2-3/4" HEX BOLT
3/8" X 2-1/2" HEX BOLT
3/8" X 1" HEX THREADED BOLT
5/16" X 3/8" INNER HEX SCREW
(pre-assemble)
3/8" WASHER
(2 pieces pre-assemble)
3/8" SPRING WASHER
(4 piecess pre-assemble)
3/8" NYLON NUT
(4 pieces pre-assemble)
Allen Hex Tool
PARTS LIST
NO. DESCRIPTION QTY.
01/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/41" 2" 3" 4" 1/4 1/2 3/4 1/4 1/2 3/45" 6"
(inch)
4
1R 1L
2R
2L
3
4
5 6 7 9
10 11 12
13
14
15
16
17
18
19
20
21
22

STEP 1 Assemble Upright Frame
5
14
14
19
64
19
21
19
19
21
21
21
19
19
14
19
14
2R
2L
19
6
1. Loosely assemble Rear Connector (4) to the Right & Left Rear
Upright Frame (2R & 2L) with two Lower Weight Holders (6), using
four 3/8" X 3" Hex Bolts (14), eight 3/8" Washers (19), and four
3/8" Nylon Nuts (21).
TO EASE THE ASSEMBLY PROCESS.
DO NOT TIGHTEN ANY BOLTS UNTIL
INSTRUCTED.

STEP 2 Assemble Upright Frame
6
1. Using a rubber mallet, install the two 40 X 80mm Oval Cap Plugs (10) to the Right
and Left Upright Frame (1R & 1L).
2. Loosely assemble two Frame Connectors (5) to the Right and Left Upright Frame
(1R & 1L) using four 3/8" X 4" Hex Bolts (13), eight 3/8" Spring Washers (20), and
four 3/8" Nylon Nuts (21).
3. Loosely assemble two Frame Connectors (5) to the Rear Right and Left Upright
Frame (2R & 2L) using 3/8" X 2-3/4" Hex Bolts (15), eight 3/8" Washers (19), and
four 3/8" Nylon Nuts (21).
4. Loosely assemble Right & Left Rear Upright Frame (2R & 2L) to the Right & Left
Upright Frame (1R & 1L) using four 3/8" Spring Washers (20), and four 3/8" Nylon
Nuts (21).
10
1R
5
13
19
21
21
1L
10
20 19
20
20
21
19
21
20
2R
21
5
19
21
20
20
21
13
20
20
2L
21
19
15
19
15

STEP 3 Assemble Top Frame
7
1. Loosely assemble Chin
Up Bar (3) to the Right
and Left Upright Frame
(1R & 1L) using four 3/8"
X 2-1/2" Hex Bolts (16),
eight 3/8" Washers (19),
and four 3/8" Nylon Nuts
(21).
21
21
19
3
1R
1L
19
19
16
19
21
21
19
19
16
19
16
16
19

STEP 4 Assemble Olympic Adapter Sleeve
8
1. Attach and tighten Upper Weight Holder (7) to the Right & Left Rear
Upright Frame (2R & 2L) using one 3/8" X 1" Hex Threaded Bolt (17),
one 3/8" Washer (19), and one 1" Plug.
2. Slide the Olympic Adapter Sleeve (9) onto each side of Connector
Rod (7) and secure with one 5/16" X 3/8" Inner Hex Screw (18). Use
the 2" Olympic Spring Clip (11) to hold weights in place during use.
3. Slide the Olympic Adapter Sleeve (9) onto each side of Lower Weight
Holder (6) and tighten the 5/16" X 3/8" Inner Hex Screw (18) with the
included Allen Hex Tool (22). Use the 2" Olympic Spring Clip (11) to
hold weights in place during use.
Tighten all the bolts and nuts from the base frames to top frames.
11
9
12
19
2R
2L
17
17
19
7
12
18
18
9
11
7
18
11 1R
1L
9
12
9
11
18
12
6
6

SAFETY SPOTTER OPTION
9
8R
8L
1. If you have purchased the optional F461 Safety Spotters,
please tilt the top back slightly to attach and remove the
Rght and Left Safety Spotters (8R & 8L) to the gun rack.
1R
1L

Assembly is complete! Please take the following steps before using the 
BODYCRAFT SQUAT RACK SYSTEM:
1.

2.
Make certain all bolts are tightened securely.
Enjoy many years of a Fit Lifestyle.
Thank you for purchasing the BODYCRAFT Squat Rack System!
If you have questions or comments, please contact your BodyCraft dealer
or contact BODYCRAFT directly at 800-990-5556 or [email protected].
Please REGISTER your BODYCRAFT at www.bodycraft.com