Body Solid GDR10 Quick start guide

                   
OWNER’S MANUAL
®
       
GDR10
T able of Contents
                                     !
" # #  $ % & ' (  # )   * )    #                   + , -
. /01 /  2 #) 3
4 5 &  0  0 6   1 7  /   / $                  8

9
Before You Begin
Retain this Owner’s Manual for future reference!
To maximize your use of the equipment please study this Owner’s Manual thoroughly. Please retain this
manual for future reference or parts information.
Thank you for purchasing the GDR10.
Unpacking the Equipment
The GDR10 is carefully tested and inspected before
shipment. We have shipped the unit in several pieces
that require assembly. Carefully unpack the box and
lay the pieces on the oor near the area where you
plan to use the rack.
After assembly, you should check all functions to en-
sure correct operation. If you experience problems,
or if any items are missing, rst recheck the assembly
instructions to locate any possible errors made dur-
ing assembly. If you are unable to correct the prob-
lem, call the dealer from whom you purchased the
machine or call 1-800-556-3113 for the dealer near-
est you.
Obtaining Service
Please use this Owner’s Manual to make sure that all
parts have been included in your shipment. When
ordering parts, you must use the part number and
description from this Owner’s Manual. Use only Body-
Solid replacement parts when servicing this unit. Fail-
ure to do so will void your warranty and could result in
personal injury.
For information about product operation or service,
check out the ocial Body-Solid website at www.
bodysolid.com or contact an authorized Body-Solid
dealer or a Body-Solid factory-authorized service
company or contact Body-Solid customer service, M-F
8:30am-5:00pm CST, at one of the following:
* Toll Free: [phone]
Local: [phone]
Fax: [phone]
: E-mail: [email protected]
or write to:
+ Body-Solid, Inc.
Service Department
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
Body-Solid continually seeks ways to improve the performance, specications and product manuals in order to ensure that only superior products are re-
leased from our factories. Please take the time to carefully read through this manual thoroughly. Instructions contained in this document are not intended
to cover all details or variations possible with Body-Solid equipment, or to cover every contingency that may be met in conjunction with installation,
operation, maintenance or troubleshooting of the equipment. Even though we have prepared this manual with extreme care, neither the publisher nor the
author can accept responsibility for any errors in, or omission from, the information given. Should additional information be required, or should situations
arise that are not covered by this manual, the matter should be directed to your local Body-Solid representative, or the Service Department at Body-Solid
Inc. in Forest Park, Illinois.
Any Questions?
Call [phone]

:
Assembly Instructions
Assembly of the GDR10 takes professional installers
about ½ hour to complete.
Professional installers are highly recommended!
If this is the rst time you have assembled this type of equipment, plan on signicantly more time. How-
ever, if you acquire the appropriate tools, obtain assistance, and follow the assembly steps sequentially,
the process will take time, but is fairly easy.
Assembly Tips
Read all “Notes” on each page before beginning each
step.
While you may be able to assemble the GDR10 us-
ing the illustrations only, important safety notes and
other tips are included in the text.
Required tools
Required tools
The basic tools that you must obtain
before assembling the GDR10 include but
are not limit to:
•Standard Wrench Set
•Metric Wrench Set
•Adjustable Wrench
•Standard / Metric Allen Key Set
•Phillips / Flathead Screwdriver
NOTE: The bottles that are marked “Poison” is
your touch up paint. Keep away from
children.
IMPORTANT!
To  n d out the length of a particular bolt, measure its
shank (the long, narrow part beneath the head) using
the ruler below.
The GDR10 has a maximum weight limit of 40lbs.
for the entire unit.
Ordering Replacement Parts
Ordering Replacement Parts
If you need to order replacement parts
please be prepared to provide the
following information when contacting us
so that we can assist you better.
1.Model Number
2.Place of Purchase
3.Serial Number (S/N)
4.Part # and Description
YOUR S/N # CAN
BE FOUND HERE
ON BACK.

STEP
1
Be careful to assemble all components
in the sequence they are presented.
; < = > ? ? @ A B C @ D E F E D G @ H I J B > K D L ? F E D G @ H ; J M N L ? O P
Two 1 (M8x45 hex head bolt)
Four 3 (M8 washer)
Two 5 (M8 nylon nut)
I < = > ? ? @ A B N L Q R S D N B L A T M G U @ S S V > S W @ E N H X J B > K D L ? F E D G @ H ; J M N L ? O Y > E @ D A Z R S D N B L A T M G U @ S S
V > S W @ E H X J P
One 2 (M4x40 phillips head bolt)
One 4 (M4 washer)
One 6 (M4 nylon nut)

STEP
1
[ \ ] ^ _ ` a ] b ` c d _ e f g ` ` _ h \ i _ j g k j l ] h e i _ d _ j m
n
o
p q
r s
t u
u
v