Boneco P340 User manual

P340
MANUAL
READ AND SAVE THESE INSTRUCTIONS

13
en
INSTRUCTIONS FOR USE
BONECO P340

14
en
1 2 3
4 5 1Front cover
2Pre-filter
3Filter A341
4BONECO P340
5Keypad with displays
OVERVIEW AND PART NAMES

15
en
Overview and part names 14
Items included 16
Technical data 16
Start-up 17
Front cover and replacement filter 18
Magnetic front cover 18
Replacement filters 18
Indicators on the display 19
Clearing the filter warning 19
Basic functions 20
“Auto” mode 20
Air quality indicator 20
Manually controlling the fan level 20
Ionizer and timer function 21
Ionizer 21
Timer function 21
Setting the OFF timer 21
Cleaning and maintenance 22
Replacing the filter 22
Cleaning the pre-filter 22
TABLE OF CONTENTS

16
en INSTRUCTIONS FOR USE FOR BONECO P340
DEAR CUSTOMER,
Congratulations on your purchase of the BONECO P340.
The extremely efficient air purifier is equipped with a
high-quality filter which rids the air of odors as well as
dust, pollen and dirt particles. The filter also effectively
alleviates many forms of discomfort caused by allergies.
This also includes hay fever or allergic reactions to house-
hold dust and mite excrement.
The BONECO P340 is designed for easy, fully automated
operation. The smart control system ensures that the
noise level remains as low as possible. Thanks to the in-
tegrated timer, the appliance also runs whenever you are
not at home. This means you can always come home to
an optimal room climate.
We hope you enjoy your new BONECO P340
air purifier!
BONECO P340 with country-
specific power cable
Filter A341
TECHNICAL DATA*
Type designation BONECO P340
Mains voltage 220–240 V, 50 Hz
Power consumption 46 W
Operating noise level 57 dB(A)
Cleaning output (CADR) 210 m³/h (177 CFM)
Air flow 300 m³/h (177 CFM)
Dimensions L×W×H 206×336×527 mm
Weight (empty) 5.3 kg / 6.3 kg
* Subject to change
ITEMS INCLUDED

17
en
START-UP
6
31
4
2
5
Take out the filter and remove the protective foil.
Remove the magnetically fixed front cover.
Insert the filter back into the holder
(note the markings).
Take off the pre-filter.
Reattach the front cover.
Put the pre-filter back on.

18
en
MAGNETIC FRONT COVER
The front cover of the BONECO P340 is held on by mag-
nets. The air purifier is not switched on if the front cover
is missing or positioned incorrectly.
REPLACEMENT FILTERS
You can obtain replacement filters from your BONECO
specialist dealer or in the online store at:
www.shop.boneco.com.
FRONT COVER AND REPLACEMENT FILTER

19
en
CLEARING THE FILTER WARNING
The “Filter” display remains illuminated af-
ter the filter has been replaced. Press and hold the
-button for five seconds to hide the display. This also
resets the counter for the new filter at the same time.
All displays on the appliance
Indicators Meaning
Ionizer is switched on or off 21
Timer function (1, 2, 4 or 8 hours) 21
Display of air quality (green, orange, red) 20
AUTO mode and fan level 20
Filter used up, replace 22
INDICATORS ON THE DISPLAY

20
en
The BONECO P340 can easily be adapted to your needs.
During start-up of the appliance, the basic setting of the
fan level is in automatic mode (AUTO MODE).
“AUTO” MODE
In the mode the fan level is automatically regu-
lated depending on the air quality. After the appliance
is switched on for the first time, it runs for the first five
minutes at the lowest fan level “L”.
AIR QUALITY INDICATOR
The air quality is measured by the built-in sensor
and is visualized by different colors on the “air” display.
When the appliance is switched on, it takes around five
minutes until the sensor has measured the current air
quality. The “Air” display flashes during this period .
Please note that the measured values may change de-
pending on the size of the room and the position of the
appliance.
The sensor registers the smallest dirt particles and
gases. They include house dust, pollen, gases such as
tobacco smoke, organic compounds and odors.
MANUALLY CONTROLLING THE FAN LEVEL
The fan level of the BONECO P340 can be manually con-
trolled.
Push the button several times until the desired fan
level is attained.
Clean Acceptable Poor
BASIC FUNCTIONS

21
en
IONIZER
The ionizer is activated by pressing the “ION” button
once. Pressing the button again switches off the ionizer.
TIMER FUNCTION
The timer function lets you determine how long the
BONECO P340 should run before it switches off auto-
matically (OFF timer).
SETTING THE OFF TIMER
1. Switch on the BONECO P340 by pressing the
button.
2. Select the desired operating setting and the desired
comfort mode.
3. Press the button once.
4. Use the button to set how long the appliance oper-
ates (1, 2, 4 or 8 hours).
The appliance runs for the specified period and is then
switched off.
5. In order to end the timer prematurely, keep the -but-
ton pressed until the timer switches off and the display
is indicated. Alternatively, you can switch off the
BONECO P340 using the button.
IONIZER AND TIMER FUNCTION

22
en
REPLACING THE FILTER
The filter is used up when the “filter” indicator is
illuminated. The filter must now be replaced to continue
to ensure optimal air purification.
The procedure for replacing the filter corresponds to the
figures on page 17.
1. Replace the filter in accordance with the instructions
on page 17.
2. Press the -button for 5 seconds until the indicator
goes out.
CLEANING THE PRE-FILTER
The pre-filter prevents excessive dust accumulation from
getting inside the BONECO P340.
1. Clean the pre-filter under running water or using a
vacuum cleaner.
2. Allow the pre-filter to dry completely before you re-
insert it.
Do not use alcohol or corrosive cleaning agents for
cleaning.
CLEANING AND MAINTENANCE