Bosch VitaBoost MMBH6P6BGB User manual

Register your
new device on
MyBosch now and
get free benefits:
bosch-home.com/
welcome
MMBH6P6BGB
VitaBoost
High performance blender
[en] Instruction manual
[ms] Arahan pengendalian
[zf] 使用說明書
[zh] 使用说明书
[ar] 
High performance blender 3
Pengisar berprestasi tinggi 13
高速攪拌機 23
高速搅拌机 31
 48

3
en
Intended use
Intended use
This appliance is intended for domestic use and the household
environment only. Use the appliance only for processing normal
amounts of food and for normal amounts of time for domestic use.
Do not exceed permitted maximum quantities (see “Recipes”).
This appliance is suitable for mixing liquid or semi-solid food, for
cutting or chopping raw fruit and vegetables, for puréeing food and
for chopping frozen food (such as fruit) or for crushing ice cubes.
The appliance must not be used for processing other substances
or objects.
Only use the appliance indoors at room temperature and up to
2000 m above sea level.
Important safety information
Read and follow the operating instructions carefully and keep for
later reference! Enclose these instructions when you give this
appliance to someone else.
If the instructions for correct use of the appliance are not observed,
the manufacturer’s liability for any resulting damage will be
excluded.
This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and/or
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved. Keep children away from the
appliance and connecting cable and do not allow them to use the
appliance. Do not let children play with the appliance. Cleaning and
user maintenance must not be performed by children.
WRisk of electric shock and fire!
■Connect and operate the appliance only in accordance with the
specifications on the rating plate. Do not use the appliance if the
power cord and/or appliance are damaged. Only our customer
service may repair the appliance, e.g. by replacing a damaged
power cord, in order to avoid hazards.
■Never connect the appliance to timer switches or remote-
controllable sockets. Never leave the appliance unattended while
it is switched on!
■Do not place the appliance on or near hot surfaces, e.g. hobs.
The power cord must not come into contact with hot parts or be
pulled across sharp edges.
■Never immerse the base unit in water or place it in the
dishwasher. Do not steam-clean the appliance. Do not use the
appliance with damp hands.

4
en Important safety information
■After each use, whenever the appliance is unsupervised, prior to
assembly, prior to disassembly, prior to cleaning and in the event
of an error, the appliance must always be disconnected from the
mains.
WRisk of injury!
■Before replacing accessories or additional parts which move
during operation, the appliance must be switched off and
disconnected from the power supply.
■Never reach into the attached blender! Never use the blender
without the lid in place.
■Care should be taken when handling the sharp cutting blades,
emptying the container and during cleaning.
■Before switching off, it is essential to turn the rotary selector in an
anticlockwise direction as far it will go (zero setting).
■After switching off, the drive continues for a short time. Wait until
the drive has come to a standstill.
■The appliance must be completely assembled before use.
WRisk of scalding!
■Care should be taken when filling hot liquids. Sudden formation
of steam may cause the liquid to spurt out of the container.
■You should always use one hand to hold the lid firmly in place
while you work, but don’t place your hand over the filling opening!
When you process hot ingredients in the jug, steam will escape
through the filling opening in the lid.
WRisk of suffocation!
Do not allow children to play with packaging material.
WCaution!
■Check that there are no foreign objects in the blender jug. Do
not insert objects (e.g. knives, spoons) into the jug. Only use the
pusher provided with the lid on!
■We recommend that the appliance is never switched on for longer
than is necessary to process the ingredients. Do not operate
at no-load.
WImportant!
It is essential to clean the appliance thoroughly after each use or
after it has not been used for an extended period. X“Cleaning and
maintenance” see page 9

5
en
Contents
Overview
XFig. A
1 Base unit / Motor block
a Cushion pad
b Drive
c Reset button (overload protection)
2 Control panel
a on/off switch
b Rotary selector with mark
c Status display (LED)
d min mark
e max mark
f Pulse button
g 6 (3)* programme selection buttons
with LEDs
3 Blender jug
a Container made of Tritan
b Scale
c Blender knife
d Handle
e Handle cover (removable)
4 Lid
a Opening for pusher / for adding more
ingredients
b Locking cap with scale
c Pusher
*Depending on the model
Before using the appliance
for the first time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
■Remove the base unit and all
accessories from the packaging and
dispose of all packing materials.
■Check that all the parts are present and
examine them for obvious damage.
XFig. A
■Thoroughly clean and dry all parts
before using for the first time.
X“Cleaning and maintenance” see
page 9
Symbols and markings
Symbol Meaning
Do not expose the blender
jug to temperatures above
80°C.
Warnings on the lid
■Do not use the appliance
unless this cover is
correctly attached
■Do not expose the blender
jug to temperatures above
80°C
Warning on the motor block
■Do not operate without
the rubber pad
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our website.
Contents
Intended use...............................................3
Important safety information.......................3
Overview.....................................................5
Before using the appliance
for the first time...........................................5
Symbols and markings ...............................5
Parts and operating controls.......................6
Use .............................................................7
Automatic programmes ..............................8
Cleaning and maintenance.........................9
Safety systems .........................................10
Troubleshooting........................................10
Recipes..................................................... 11
Disposal....................................................12
Guarantee.................................................12