Bosch G100 User manual

ntrusion | Getting
Started | G450 Home Control Gateway
are Trademarks of Robert Bosch GmbH, Germany
are Trademarks of Robert Bosch GmbH, Germany
Getting Started
This Home Control Gateway is a controller that supports home automation devices within a Home
Control ecosystem. Home automation devices are added to the network, and provide users simple home
control from mobile devices (smart phones, tablets) and web browsers. The gateway additionally
communicates with, and controls, Bosch alarm panels using the Ethernet port connection.
Activation Process
The following sequence of events must take place prior to the activation and daily use of the Home
Control Gateway. Refer to the list below for task assignments and ownership.
1. Dealer: The Dealer must register for services at:
https://installerservices.boschsecurity.com
2. Bosch: The Bosch representative creates an Administrative Portal (AP) account and unlocks
the dealer’s account (this enables the dealer to order the controller). An AP account email
notification is sent to the dealer.
3. Dealer: The Dealer orders the Home Control Gateway. The Dealer registers the controller
and activates the service in Administrative Portal upon arrival of the controller.
4. Dealer: The Dealer installs and configures the controller and enables a Bosch Alarm Panel to
communicate with the controller.
5. End-User: The End-User customizes and uses the Home Control ecosystem. Additional
device may be added at this time.
G450 Overview
The following descriptions refer to the buttons and LEDs on your gateway. Although these buttons are
not the primary method for adding or removing devices, please familiarize yourself with the Home Control
Gateway.
Refer to the figure below for a system overview.

Intrusion | Getting Started | Home Control Gateway | 2
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3
G450 overview
Log in to Your Account
This section describes basic information on logging into your account.
Logging in:
1. Go to http://bosch.mios.com. The login page opens.
2. From your welcome email, insert your credentials (Username and Password) and click Login.
Callout~ Description
G100
G450
1~Power LED
X
X
2~Internet LED
X
X
3~Wi-Fi LED
X
4~Z-Wave LED
X
X
5~Cloud LED
X
6~ZigBee LED
X
7~Bluetooth LED
X

Intrusion | Getting Started | Home Control Gateway | 3
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3
3. Select the gateway you want to log into and click the Connect button. This is a convenient way to
control different gateways from a single account (one in your home, another in your summer
cottage). A status window briefly appears stating that the connection is in progress.
4. The dashboard appears. The dashboard is your control center for the Home Control Gateway. The
appearance of your dashboard may vary slightly from the one below, depending on the devices you
install.

Intrusion | Getting Started | Home Control Gateway | 4
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3
Refer to the next section for details about including new devices.
Include (Add) Devices
The Home Control Gateway wirelessly communicates with other controllable Home Control devices
through an initial process called "pairing". For many devices, the Gateway supports a guided installation
through a device installation wizard. This process walks you through all necessary steps to pair (include)
your device.
Pairing devices in close proximity
1. Locate the device you want to pair.
2. Place the device within 30 feet of the Home Control Gateway.
3. Go to “Devices” and click “Add Device” to start the wizard.
4. Click on the appropriate device category (plus symbol).

Intrusion | Getting Started | Home Control Gateway | 5
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3
5. Select the device type and model number that you want to install and click the symbol next to it.
Follow the instructions on the screen.
Notice
Your Bosch Security Dealer has already installed your Bosch Security System. You will not find this
device within the Device installation wizard.
Pairing Installed Devices with a Battery Powered Home Control Gateway
Sometimes controllable devices in your home are not easily moved within pairing distance of the
Gateway. For example, a light switch that is already installed on a wall in another room, or a door lock.
For these situations, the Gateway includes a battery pack (G100 only) that allows you to disconnect the
Gateway from the power cable and bring it to the installed device. This step is optional, but if you do
have pre-installed or otherwise non-movable controllable devices that you want to pair with the Gateway,
please perform the following:
1. Disconnect the Gateway’s network cable and power cable (the one that goes into the wall outlet)
and press and hold the battery button (G100 only) for 5 seconds. Doing so causes the
Gateway to power up in battery mode.

Intrusion | Getting Started | Home Control Gateway | 6
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3
Notice
G100 only: blue LED will flash during the startup process. The blue LED illuminates continuously and
the orange LED flashes once per second when it has completed the startup process. You're now ready
to walk with the Gateway anywhere around your home to pair controllable devices.
2. Locate the device you want to pair.
3. Press the button to set the Gateway to enter inclusion mode. Refer to the “pairing” or
“inclusion” section of your device’s documentation for more information related to completing the
pairing and/or inclusion process. The orange LED flashes rapidly for 3 seconds to indicate a new
device was paired successfully.
4. Press and hold the button for 5 seconds until all LEDs go off to save your changes. The
Gateway exits the inclusion mode and turns off the battery mode.
Notice
G100 only: If you want to exclude a device, follow the above mentioned steps, but press the button
instead of the button. To exit, hold the button for 5 seconds until LEDs go off. This will save all
changes.
User Interface Features (for web and mobile apps)
The Home Control Gateway provides a variety of interactive features accessed through a web browser,
or through the use of a mobile device and supporting app. Refer to the list below:
Card Carousel. This feature allows you to quickly view the current state of the system. The left card
shows the connection state of all devices, and the right card shows if any of the security devices
require your attention.
House Modes (My Modes, Preset Modes). House modes are easy to use; pre-defined settings that
allow you change your home automation configuration without the need to create scenes. This allows
you to quickly toggle between the four presets (modes). These presets are optimized for their
immediate use. You may adjust presets by using the button. This opens the configuration menu.
Weather widget (Web UI). The weather widget shows the temperature and current conditions for the
city you choose. It also shows the local time of the device’s location.

Intrusion | Getting Started | Home Control Gateway | 7
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3
Event notification bar. The notification bar shows the latest events that occurred on the unit. Access
the notification bar by pressing the pull-down button . Select events from the drop-down list.
Turn All On/Off. This option allows you to quickly turn on, or off, all of your light switches:
The numeric badge icon shows how many lights are on.
Lock/Unlock All door locks. This option allows you to quickly lock, or unlock, all of your doors:
The numeric badge icon shows how many doors are currently unlocked.
Mobile Devices and the Remote Security Plus app
In addition to using the web browser for configuration and control, you can also perform the same tasks
by using the Remote Security Control Plus app from your mobile device (e.g. smart phone, tablet). Both
Android and iOS devices are supported by the app.
To control with a mobile device, download and install the Remote Security Plus application from Apple’s
App Store (www.itunes.apple.com), or from Google Play (www.play.google.com).
Perform the following:
1. Launch the application and log in using the same credentials used when accessing the web
browser dashboard. Depending on the operating system of your smart phone, you might see one of
the following screens.

Intrusion | Getting Started | Home Control Gateway | 8
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3
2. Your dashboard window appears with the following preset modes (My Modes) as well as Shortcuts
and your Favorite devices.
3. Open the menu by clicking on Menu, or by sliding over your screen from left to right, depending on
your device.
4. Select Devices to view and control your devices.
5. Select Scenes to create or modify scenes using your mobile app. Follow the instructions on the
screen.

Intrusion | Getting Started | Home Control Gateway | 9
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3
Plan your Goals
The Home Control Gateway and its components let you monitor, control, and automate many devices
around your home. You and your smartphone (or PC or tablet) communicate with these devices. Such
devices include cameras, door locks, lighting controls, and other supported devices. These devices can
work independently, or in groups that work together, like a thermostat that turns itself down when it sees
bright sunlight from a daylight sensor, and back up again when it gets dark.
Proper planning and coordination are essential when utilizing the capabilities of the gateway in
conjunction with your Bosch Security System. Understanding your current environment gives you a
clearer picture as to how you want to automate your living space, and how you might improve it through
the use of home control functionality.
Monitoring and Security Applications
One popular application is monitoring and operating electronic door locks. When your child gets home
from school and unlocks the door, the Home Control Gateway can send you a text message or an email.
You can view a still image, live or recorded video, from your computer or smartphone to be certain that
your kids are home safe and didn't bring unwelcome guests. You can view live video from inside your
home to check in on the babysitter while you are out, and so on.
In the security and monitoring examples above, you use a powered door lock, a video camera and
perhaps a motion detector. Most of these devices talk to the gateway through Z-Wave, ZigBee or Wi-Fi,
interoperable standards in wireless control. How many of these devices will you need to connect? It all
depends on what you want to accomplish.

Intrusion | Getting Started | Home Control Gateway | 10
Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • us.boschsecurity.com | 2017.06 | v3
Energy Management Applications
With the Home Control Gateway you can remotely, and automatically, create a household that runs at
maximum energy efficiency with reduced energy bills. You can create "scenes" that adjust lights and
climate to pre-determined settings that you control with one touch or that react automatically to changing
conditions. You can remotely turn appliances off or on for example, turn off the lawn sprinkler when it
starts raining or turn up the thermostat to warm the house when you’re on your way home.
For many energy management applications, there are a wide range of plug-in and wall-mounted lighting
switches that make any light remotely controllable. The Home Control Gateway is compatible with Z-
Wave, ZigBee, and Wi-Fi thermostats. There are many plug-in modules that control indoor and outdoor
appliances. And to make any device "smart", simply plug in a SmartSwitch, which not only allows you to
control whatever you plug into it, but also to monitor that device's energy consumption over time.
Wellness Assistance Applications
The Gateway helps you protect your independent elderly loved ones by keeping you connected with
them and helping to monitor and assist them. The Gateway can notify you if there is no motion in your
loved one’s home, so you can check in and get help. The Gateway can also turn on lights when motion is
detected, so there's no more fumbling for the bathroom light or dangerous stairwell lights in the middle of
the night.