Bosch Smart Home RFPR-ZB-SH-EU User manual

Motion
Detector
Quick start guide
LET´S GET
STARTED
EN

1. Install the Smart Home Controller
If not yet installed: Download the Bosch Smart
Home App and install the Bosch Smart Home
Controller.
2. Separating housing and fixing bracket
To do so, use a screwdriver to twist the turn
lock on the underside of the Motion Detector
counterclockwise by 180°, and simultaneous-
ly pull away the housing from the mounting
bracket.

4. Scan the QR code
The app will prompt you to scan the QR code
on the product. The QR code is on the back
side of the housing.
3. Launch the Smart Home App
Launch the Bosch Smart Home App and select
“Add device”. Follow the instructions in the
app.

Fixing instructions
▶ There must not be any windows in the detection area of the Motion Detector.
▶ Avoid direct or indirect sunlight in the detection area of the Motion Detector.
▶ Do not block the detection area with objects.
▶ Do not install the Motion Detector near rotating objects (e.g. fans) or independently moving objects.
▶ Do not install the Motion Detector near sources of heat or cold.
▶ Do not place any objects on which pets can climb in the detection area.
▶ Place the Motion Detector in the part of the room which is most frequently walked through
(e.g. near the door).
Please refer to our website for an explanatory video on how to install the Bosch Smart Home Motion
Detector at: www.bosch-smarthome.com/installation

Device type name Bosch Smart Home Motion Detector
RFPR-ZB-SH-EU
Batteries CR123A
Battery life Up to 5 years1) (with use of one battery)
Radio frequency 2.4 GHz
Max. transmission power 10 dBm
Protocol Based on ZigBee HA1.1 with extended
encryption technology
Radio range in free-field conditions > 50 m
Protection class IP20
Technical data
1)
5 years, based on typical storage temperature (–10 to 55°C), ambient temperature, 160 motion detections/day and 2 software
renewals of the device/year. High temperatures over 50 °C shorten the lifetime. Optionally a second battery (not included) may
be used. The battery lifetime doubles accordingly.

Ambient temperature 0 °C to +50 °C
Humidity (non-condensing) 0 % to 93 %
Software class Class A
Housing dimensions (W × H × D) 60 mm × 108 mm × 42 mm
Weight (including battery compartment) 114 g
Detection range 90° and 12 m
Lens 7 × 11
Recommended mounting height 2.20 m – 2.70 m

Safety instructions
▶ Installation must be carried out in accordance
with the applicable regulations. Failure to comply
with the instructions may result in damage to
property and/or personal injury.
▶ Take the batteries out of the device if it is not
used for a prolonged period of time.
▶ The enclosed batteries are not suitable for charg-
ing.
▶ Do not throw batteries into fire! Do not expose
batteries to excessive heat. Do not short-circuit
batteries. Danger of explosion!
▶ Do not modify the product in any way. Any other
use is considered unintended use. No liability is
accepted for any consequential damage.
▶ The product may only be used indoors with Bosch
Smart Home original components and recom-
mended partner products.
▶ Avoid dust, moisture, vibrations, mechanical
stress, cold, and constant exposure to sunlight or
heat.
▶ When choosing a fixing location and when drilling,
pay attention to potential electrical lines and/or
supply lines that could be behind the wall.
▶ The device is not a toy. Do not let children play
with it. Do not leave packaging material lying
around carelessly. Plastic film and small parts can
become a dangerous toy for children.
▶ When controlling a device remotely or using
automated control, external circumstances (such
as the radio connection to the Smart Home Con-
troller being interrupted) mean it cannot always
be guaranteed that commands will actually be
carried out or that the correct status of the device
will be displayed in the app and on other Smart

Home display devices (e.g. a Twist). This may
result in damage to property and/or injury.
Therefore:
– Please ensure as far as possible that no-one is
at risk during remote operation or automated
control.
– Please exercise particular caution when setting
up or adjusting remote or automated control and
regularly check the desired functionality.

Environmental protection and disposal
Electrical and electronic equipment that is no
longer usable and defective or used batteries must
be separated from other waste and recycled in an
environmentally friendly manner (European Direc-
tive on waste electrical and electronic equipment).
To dispose of electrical and electronic equipment
or batteries, use your country-specific return and
collection systems.
Declaration of conformity
Hereby, Robert Bosch Smart Home GmbH declares
that the radio equipment type Bosch Smart Home
Motion Detector complies with Directive
2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet
address:
www.bosch-smarthome.com/conformity

Maintenance and care
The product is maintenance-free. Repairs should
only be performed by qualified persons. Clean the
product with a soft clean dry and lint-free cloth.
Do not use cleaning agents containing solvents.
Incorrect handling (see notes on intended use)
or non-observance of hazard warnings may com-
promise the protection afforded by the device.
02/2020 8 750 000 921 V001
Service instructions
▶ If you have any questions, please contact our
freephone service hotline.
▶ You can find more detailed information on ope-
rating, installation and maintaining the product
online at: www.bosch-smarthome.com/service
Robert Bosch Smart Home GmbH
Schockenriedstraße 17
70565 Stuttgart-Vaihingen
0808 1010 151 (United Kingdom)*
1800 200 724 (Ireland)*
Mon-Fri 7:00 am – 8:00 pm
Sat/Sun 8:00 am – 6:00 pm
* Freephone service
[e-mail]